TRENDnet TV-IP300 Manuale utente
Copyright ©2004. All Rights Reserved. TRENDware International, Inc.
TRENDnet
TRENDware, USA
What's Next in Networking
TV-IP300
Version 12.28.04
Day/Night Internet Camera Server
Quick Installation Guide
Guide d'installation rapide pour
l'Internet Caméra Serveur Jour et Nuit
Anleitung zur Schnellinstallation der
Nachtsicht Farb IP Kamera Server
Guía de Instalación Rápida para
servidor de cámara Internet Día/Noche
Table of Contents
English ......................................................................................................
Troubleshooting ........................................................................................
1
1
2
4
5
1. Prepare for Installation ......................................................................
2. Install Hardware ................................................................................
3. Configure the Internet Camera ..........................................................
Thank you for purchasing the TV-IP300. This Internet Camera will allow you to
view live images from internal and external networks.
This guide will help you set up and configure your Internet Camera. Following
the installation instructions should be quick and easy. If you run into problems,
please refer to the Troubleshooting section or the more detailed installation
procedures on the CD User's Guide. If you need further technical support,
please visit www.trendnet.com or call our technical support department by
phone.
Verify Package Contents
Please make sure you have everything in the box:
1
1. Prepare for Installation
English QIG
English
System Requirement
1. 10/100Mbps Ethernet
2. CD-ROM Drive
3. CPU: Intel Pentium III 350MHz or above
4. Memory: 128MB or above
5. Web Browser: Microsoft Internet Explorer 5.0 or above
6. VGA Resolution: 800 x 600 or above
TV-IP300
CD-ROM Quick Installation Guide
AC Power Adapter Metal Stand
Copyright ©2004. All Rights Reserved. TRENDware International, Inc.
TRENDnet
TRENDware, USA
What's Next in Networking
TV-IP300
Version 12.28.04
Day/Night Internet Camera Server
Quick Installation Guide
Guide d'installation rapide pour
l'Internet Caméra Serveur Jour et Nuit
Anleitung zur Schnellinstallation der
Nachtsicht Farb IP Kamera Server
Guía de Instalación Rápida para
servidor de cámara Internet Día/Noche
2
2. Install Hardware
1. Position the metal stand, and mount the Internet Camera to the stand.
2. Connect the RJ-45 network cable to the Internet Camera then connect the
other end of the network cable to a switch or hub.
3. Connect the power adapter to the Internet Camera. Make sure to use the
power adapter supplied with the Internet Camera.
English
32
1
TV-IP300
Note: Using a different power adapter may damage the unit.
3English
Special I/O Ports Features
1. I/O Connector
The Internet Camera provides the I/O connectors on the rear panel, which
provide the physical interface to send and receive digital signals to variety of
external alarm devices.
2. DIP Switch
AES/AI Switch: When using the Auto Iris Lens, please switch to AI position
Flicker less/Off: If the power frequency used (in NTSC area) is 50Hz, please
switch to Flicker less position.
3. Iris Level
This is used only when the DC-Iris lens is connected to the camera.
4. Reset Button
This resets all the settings in the camera to default factory settings.
Power
Reset switch
RJ-45
Connector
Iris level
I/O connector
DIP switch
4
1. Open Internet Browser Window and enter <http://192.168.0.30> (camera's
default IP address)
2. Click on System Administration to access the configuration page.
3. Enter an IP address, Subnet mask, and Default gateway that corresponds
with your existing network for the camera. Then click on Save button to keep
the changes.
English
3. Configure the Internet Camera
Note: The PC's IP (Example 192.168.0.50) address must correspond
with the Internet Camera's IP address (Default IP: 192.168.0.30) in the
same segment for the two devices to communicate.
Note: If you need to access the configuration remotely, it is
recommended to enter a static IP address and the Internet DNS IP
address.
5
Q1.
A1.
Q2.
A2.
Q3.
A3.
Q4.
A4.
The image is blurry, how do I fix this?
You can adjust the Internet Camera's focus by rotating the lens.
Can I replace the camera lens?
The Internet Camera's Lens is replaceable with a standard CS-Mount
type lens.
How do I view the Internet Camera's live images within my Local
Network?
Open a web browser (Internet Explorer or Netscape), type your
Wireless Internet Camera's IP address (i.e.: 192.168.0.30) in the Address
bar, and then hit the Enter key. The Welcome page of the Internet Camera
will appear.
When I enter the IP address of the camera, the image does not load,
why?
Please make sure all the Active X features are enabled for your
Internet Explorer.
1. Go to Tool (on the Tool bar) > Internet options > Security
Troubleshooting
6
2. Click on Custom Level and make sure all ActiveX controls are set to
"Enable" and click OK.
3. Once you save the settings, the browser will load again and the image
should appear.
1. Select Use the following IP address option and enter the IP, Subnet
Mask and Default gateway addresses.
2. Click OK to complete
7
Q5.
A5.
How do I configure my computer's IP address?
For Windows 2000/XP users:
- On the Desktop, right click on My Network Places > select Properties
> right click on the Local Area Connection > select Properties,
the Local Area Connection Properties Window will appear
- Under General tab, select Internet Protocol (TCP/IP) > click on
Properties button, Internet Protocol (TCP/IP) Properties Window will
appear
8
For Windows 98/ME users:
- On the Desktop, right click on Network Neighborhood > select Properties >
right click on the Local Area Connection > select Properties, the Local Area
Connection Properties Window will appear
- Under Configuration tab, select your Network Adapter (TCP/IP protocol) >
click on Properties button, TCP/IP Protocol Properties Window will appear
1. Select Specify an IP address option and enter the IP, Subnet Mask
addresses.
Technical Support Hours
7:00AM ~ 6:00PM, Monday through Friday
Pacific Standard Time (except holidays)
Contact Technical Support
Telephone: +1-310-626-6252
Fax: +1-310-626-6267
Website: www.TRENDNET.com
E-mail: [email protected]
For detailed information about the TV-IP300's configuration and advanced
settings, please refer to the User's Guide on the included CD-ROM or to
www.TRENDnet.com.
Altri manuali per TV-IP300
3
Altri manuali TRENDnet Telecamera di sicurezza
TRENDnet
TRENDnet TV-IP751WC Manuale utente
TRENDnet
TRENDnet TV-IP110WN Manuale utente
TRENDnet
TRENDnet TV-IP522P Manuale utente
TRENDnet
TRENDnet TV-IP312PI Manuale utente
TRENDnet
TRENDnet TV-IP252P - SecurView PoE Dome Internet Camera... Manuale utente
TRENDnet
TRENDnet TV-IP345PI Manuale utente
TRENDnet
TRENDnet 15-AH28B Manuale utente
TRENDnet
TRENDnet TV-IP322P Manuale utente
TRENDnet
TRENDnet TV-IP262PI Manuale utente
TRENDnet
TRENDnet TV-IP312PI Manuale utente
TRENDnet
TRENDnet TV-IP422W - Wireless Day/Night Pan/Tilt Internet Camera... Manuale utente
TRENDnet
TRENDnet TV-IP110 - SecurView Internet Surveillance... Manuale utente
TRENDnet
TRENDnet TV-IP329PI Manuale utente
TRENDnet
TRENDnet TV-IP862IC Manuale utente
TRENDnet
TRENDnet TV-IP410PI V1 Manuale utente
TRENDnet
TRENDnet TV-IP110WN Manuale utente
TRENDnet
TRENDnet TV-IP310PI Manuale utente
TRENDnet
TRENDnet TV-IP313PI Manuale utente
TRENDnet
TRENDnet TV-IP301 - ProView Advanced Day/Night Internet Surveillance... Manuale utente
TRENDnet
TRENDnet TV-IP301 - ProView Advanced Day/Night Internet Surveillance... Manuale utente
