TRENDnet TV-IP344PI Manuale utente

TV-IP344PI (V1)

Quick Installation Guide

Table of Content

1 English

1. Before You Start

2. Hardware Installation and Configuration

1. Before You Start

Package Contents

ŸTV-IP344PI

ŸCD-ROM (Utility, Software and User's Guide)

ŸQuick Installation Guide

ŸNetwork cable (1.5m / 5ft.)

ŸRJ-45 coupler

ŸCamera Mounting hardware

Minimum Requirements

ŸPower over Ethernet (PoE) switch (e.g. TPE-S50) or PoE Injector (e.g. TPE-113GI)

ŸA networked computer and web browser

ŸWired network

Note:

ŸThe TV-IP344PI only works with Power over Ethernet (PoE) devices that follow the IEEE

802.3af standard.

ŸThe TV-IP344PI has a 5.5 mm barrel connector for an optional 12 V DC 1A power adapter.

ŸOptional power supply not included.

TRENDnetVIEW Pro Requirements

Supported Operating

Systems

1-8 Cameras

CPU CPU

9-32 Cameras

Memory Memory

Windows 10 /

Windows 8.1 /

Windows 8 /

Windows 7 /

Windows Server 2008 /

Windows Server 2012

2 GHz 2 GHz2 GB RAM

or above

4 GB RAM

or above

2. Hardware Installation and Configuration

1. Do not install or mount the IP camera until after you complete the installation steps below.

Temporarily place the IP camera next to your computer.

2. Insert the Utility CD-ROM into your CD-ROM drive.

3. Select language from the drop down menu.

4. Click Install Camera.

5. Write down the MAC address of your camera. Then click Next.

6. Connect a network cable from the camera's network port to your PoE source. The IR LEDs will

turn on and show a dim visible red light. Allow 60 seconds for the camera to boot up. Then

click Next.

7. Select your camera. Click Next and follow the instructions.

8. Select DHCP option to assign an IP by DHCP server, select “Fixed IP” to set IP address

manually. Click Next.

9. If you select “Fixed IP”, fill out the IP address, subnet mask, default gateway, and DNS server.

Please ensure that the IP address of the camera and the computer must be within the same

network. Click Next.

10. Select Change Password. Enter a new password, confirm the new password and then click

Next.

12. Congratulations! Your camera is now ready to be installed in its final location. Scan the QR

code to download a free mobile app to view the camera from your mobile device. Click Finish

to exit the installation wizard.

11. Initial Setup is complete! Your camera is now connected to your network. Click the hyperlink

to confirm access to the management page. This will open up a web browser. To resume

installation, minimize the web browser and then click Next.

Finish

13. To managemultiple cameras and for more advanced features, please install the

TRENDnetVIEW Pro software. Install the software by clicking Install TRENDnetVIEW Pro

Software in the Autorun window and refer to the TRENDnetVIEW Pro User's Guide on the CD

for more information.

Note

ŸSee User's Guide for advanced management functions

ŸTwo User's Guides are included – one for the camera and one for the complimentary

management software.

ŸWhen viewing through Chrome, please follow the steps in the User’s Guide.

Using the TV-IP344PI with a PoE switch (TPE-S50)

ŸConnect the provided network cable from the Power over Ethernet switch (e.g. TPE-S50) to

the network port on the IP Camera.

ŸConnect the switch to your network.

14. Install the camera in your desired location. To connect the IP camera to your network with

PoE, please use either of the following examples:

PoE

Internet

Non-PoE

TV-IP-344PI

TPE-S50

ŸConnect the power adapter to the TPE-113GI and then to a power outlet.

ŸConnect a network cable from the TV-IP344PI to the TPE-113GI's PWR+DATA OUT (PoE)

port.

ŸConnect a network cable from a switch or router (e.g. TEW-818DRU) to the TPE-113GI's

DATA IN (Non-PoE) port.

Using the TV-IP344PI with an Injector (TPE-113GI)

TPE-113GI

DATA

PWR+DATA

OUT

Non-PoE

PoE

Internet

TV-IP-344PI

Altri manuali per TV-IP344PI

Indice

Altri manuali TRENDnet Telecamera di sicurezza

TRENDnet

TRENDnet TV-IP310PI Manuale utente

TRENDnet

TRENDnet TV-IP262P Manuale utente

TRENDnet

TRENDnet TV-IP430PI Manuale utente

TRENDnet

TRENDnet TV-IP400 Manuale utente

TRENDnet

TRENDnet TV-IP110WN Manuale utente

TRENDnet

TRENDnet TV-IP612WN Manuale utente

TRENDnet

TRENDnet 15-AH28B Manuale utente

TRENDnet

TRENDnet TV-IP602WN Manuale utente

TRENDnet

TRENDnet TV-IP312PI Manuale utente

TRENDnet

TRENDnet TV-IP252P - SecurView PoE Dome Internet Camera... Manuale utente

TRENDnet

TRENDnet TV-IP323PI Manuale utente

TRENDnet

TRENDnet TV-IP662PI Manuale utente

TRENDnet

TRENDnet TV-IP301 - ProView Advanced Day/Night Internet Surveillance... Manuale utente

TRENDnet

TRENDnet TV-IP100-N Manuale utente

TRENDnet

TRENDnet TV-IP300 Manuale di istruzioni

TRENDnet

TRENDnet TV-IP551WI Manuale utente

TRENDnet

TRENDnet 15-AH28B Manuale utente

TRENDnet

TRENDnet EL-HS800 Manuale utente

TRENDnet

TRENDnet TV-IP662WI Manuale utente

TRENDnet

TRENDnet TV-IP751WC Manuale utente

TRENDnet

TRENDnet TV-IP420P Manuale utente

TRENDnet

TRENDnet TV-IP312PI Manuale utente

TRENDnet

TRENDnet TV-IP311PI Manuale utente

TRENDnet

TRENDnet TV-IP602WN Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente