TRENDnet TK-1604R Manuale utente

TK-804R

TK-1604R

Quick Installation Guide

Table of Contents

Version 05.07.2007

English .....................................................................................................

Technical Specifications ............................................................................

Troubleshooting .........................................................................................

1. Before You Start

2. How to Install .....................................................................................

3. Operation ...........................................................................................

................................................................................

System Requirements

Application

Package Contents

1. Before You Start

English

?Quick Installation Guide

?Rack-Mount kit

?AC Power Adapter (9V DC, 1A)

?Daisy-Chain Cable (HDB 15-pin male

to female)

?Daisy-Chain Terminator (HDB 15-Pin

male)

?Firmware Cable (HDB 15-pin

female to female)

TK-804R/TK-1604R

?PS/2 or USB Mouse

?VGA Compatible Monitor

?USB KVM Cables (e.g. TK-CU06/TK-CU10/TK-CU15)

?Windows 98SE/ME/2000/XP/2003 Server/Vista, Linux, and Netware

PS/2 or USB Keyboard

Monitor

8/16 Ports Stackable

Rack Mount USB

KVM Switch with OSD

(TK-804R/TK-1604R)

USB or PS/2

Mouse

USB or PS/2

Keyboard

PC 2

PC 1

PC 3

PC 5

PC 4PC 6

Monitor

PC 1PC 3PC 5

Daisy-Chain

Stand Alone

Daisy-Chain

8/16 Ports Stackable

Rack Mount USB

KVM Switch with OSD

(TK-804R/TK-1604R)

Master

Slave

USB or PS/2

Mouse

USB or PS/2

Keyboard

PC 2PC 4PC 6

Slave

2. How to Install

English

1. Turn OFF all computers and their

peripherals, and then disconnect all

power cords.

5. Turn ON the connected computers

one-by-one and wait until each

computer's desktop appears.

2. Connect the shared PS/2 or USB

keyboard, monitor, and PS/2 or

USB mouse to the KVM switch's

Console Port. (TK-804R shown)

3. Connect the included AC Power

Adapter to the KVM switch and

then to a power outlet.

4. Use the USB KVM cables to

connect your PC to the KVM

switch.

To KVM

To Computer

English

Note:

1. You must use the daisy-chain cable provided with the KVM switch

2. You can only daisy-chain the KVM switch with another TK-804R or

TK-1604R.

3. You can daisy-chain up to 8 TK-804 or TK-1604 KVM switches. There is

a maximum of 64 (TK-804R) or 128 (TK-1604R) computer connections.

Daisy-Chain

Master

Slave

2. Connect the opposite end of the

daisy-chain cable to the Daisy-

Chain IN port on the second

(slave) KVM switch.

1. Connect one end of the provided

daisy-chain cable to the Daisy-

Chain OUT port on the first

(master) KVM switch.

English

5. Turn ON the connected

computers one-by-one and wait

until each computer's desktop

appears.

3. If you have a third KVM switch,

connect one end of the daisy-chain

to the Daisy-Chain OUT port on

the second KVM switch. Then

connect the opposite end of the

daisy-chain cable to the Daisy-

Chain IN port on the third (slave)

switch. Repeat for each additional

switch.

4. Connect the included Daisy-Chain

terminator to the Daisy-Chain OUT

port on the last KVM switch in the

chain.

2. Carefully position the KVM switch

onto the rack. Align the bracket to

the screw holes on the rack, then

use the screws provided with the

equipment rack to mount the KVM

switch.

The KVM Switch can be mounted in an EIA standard-size 19-inch rack, which

can be placed in a wiring closet with other equipment.

Note: If you would like to mount the KVM switch to a EIA 19” equipment rack,

install the included mounting brackets to the sides of the KVM switch, secure

them with the screws provided, and then mount the KVM switch to the

equipment rack with the hardware provided by the equipment rack

manufacturer.

Rack Mount

1. Attach the mounting brackets to

both sides of the KVM switch and

secure them with the provided

screws.

Your installation is now complete.

To ensure the highest level of customer service and support, please take a moment to

Thank you for choosing TRENDnet

English

3. Operation

Note: To switch between computers, you can use the front-panel push buttons,

On Screen Display (OSD) or the Hot Key commands.

On Screen Display (OSD) Control

To activate the OSD Menu, use the following hot-key command:

Space Bar

ScrLkScrLk + +

Push Buttons

Press the push buttons to switch

between computers.

LED Indicators

Bank Number

Indicates the sequence of the KVM

switch when daisy-chained.

Red LED light: KVM cable is

connected and PC is powering the

KVM switch.

Green LED light: Indicates the

selected PC port is active, whether

the computer is turned on or off.

Hot-Key Commands

A keyboard hot-key command consists of at least three keystrokes:

Hot-Key command = ScrLk + ScrLk + Command key(s)

After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again.

You then have another 2 seconds to press a command key. A beep confirms

that the KVM switch is in "Hot-Key" mode. If you do not press a key within 2

seconds, the switch will exit hot-key mode.

To select a specific PC port:

ScrLk

For example, to select port 1 on the 1st KVM switch, you execute the following

key sequence:

Select PC =

Port number

Bank number

For example, to select port 10 of the 8 KVM switch on a series of daisy

chained TK-1604R's you execute the following key sequence:

ScrLkScrLk + + + + +

Note: When using the KVM switch standalone, type in 0 + 1 for the bank

number.

For a list of all the Hot-Key commands, please see the Quick Reference Sheet.

English

Quick Reference Sheet for TK-804R/TK-1604R

Select PC

Next lower

channel

Autoscan Beep

Sound On/Off

Next higher

channel

Next lower

bank

Next higher

bank

ScrLk ScrLk

+ +

(Arrow up)

ScrLk ScrLk

+ +

(Arrow down)

ScrLk ScrLk

+ + PgDn

ScrLk ScrLk

+ + B

Use arrow keys to

select and then

hit enter

Use arrow keys to

select and then

hit enter

Use arrow keys to

select and then

hit enter

PgUp

PgDn

ScrLk ScrLk

+ +

PgUp

- - -

B ZA YScrLkScrLk + + + + +

(AB) = bank number

(YZ)= 2-digit channel number

Description

Press Push Button

for a specific port

to the switch

Select the active bank

(switch) and channel

(computer)

Select the next lower

connected channel. Only

works within active bank.

Select the next higher

connected channel. Only

works within active bank.

Select the next lower bank

when multiple switches are

daisy-chained

Select the next higher bank

when multiple switches are

daisy chained

Toggle On/Off beep during

autoscan mode

- - -

Command Hot-Keys OSD Front-panel

Load Factory

Default - - -

Restore the EEPROM

settings to the factory

default (except for

password).

Reset / Initialize ScrLk ScrLk

+ + End

Resets/reboot/initialize

daisy-chain and activates

password protection

- - -- - -

- - - F1 (Setup Page) >

Load Default

Altri manuali per TK-1604R

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali TRENDnet Interruttore

TRENDnet

TRENDnet TE100-S1616V Manuale utente

TRENDnet

TRENDnet TEG-S240TX - DATA SHEETS Manuale utente

TRENDnet

TRENDnet TK-1603R Manuale utente

TRENDnet

TRENDnet TPE-T80 Manuale utente

TRENDnet

TRENDnet TPE-224WS - Web Smart PoE Switch Manuale utente

TRENDnet

TRENDnet TE100-S24D Manuale utente

TRENDnet

TRENDnet TI-IG60 Manuale utente

TRENDnet

TRENDnet TEG-S80TXD Manuale utente

TRENDnet

TRENDnet TE100-SK2 Manuale utente

TRENDnet

TRENDnet TK-208K Manuale utente

TRENDnet

TRENDnet TE100-S810Fi - Switch Manuale utente

TRENDnet

TRENDnet TK-IP101 Manuale utente

TRENDnet

TRENDnet TPE-3018L Manuale utente

TRENDnet

TRENDnet PoE Web Smart Switch Series Manuale utente

TRENDnet

TRENDnet TE-800plus Manuale utente

TRENDnet

TRENDnet TK-209i Manuale utente

TRENDnet

TRENDnet TEG-S2500i Manuale utente

TRENDnet

TRENDnet TPE-80WS - Web Smart PoE Switch Manuale utente

TRENDnet

TRENDnet TU2-NU4 Manuale utente

TRENDnet

TRENDnet TU2-400E Manuale utente

TRENDnet

TRENDnet TK-423K - USB/PS/2 KVM Switch Manuale utente

TRENDnet

TRENDnet TE100-S16g Manuale utente

TRENDnet

TRENDnet TEG-S80g - Switch Manuale utente

TRENDnet

TRENDnet TPE-224WS - Web Smart PoE Switch Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente