TRENDnet TEW-411BRP Manuale utente

User’s Guide

TEW-411BRP

Wireless 802.11g AP Router

User’s Manual

Version 1.4

User’s Guide

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical,

photocopying, recording, or otherwise without the prior writing of the publisher.

July. 2003

User’s Guide

Contents

1. Introduction.............................................................................................................. 4

2. Safety Notification ................................................................................................... 5

3. Hardware Installation .............................................................................................. 6

4 Web Management Settings ...................................................................................... 7

4.1. Primary Setup…..

……………………………………………………………………………………….8

4.2. Security

…………………………………………………………………………………………………..13

4.3. System

……………………………………………………………………………………………………15

4.4. DHCP Server

…….……………………………………………………………………………………..18

4.5. SNMP Info

……………………………………………………………………………………………….20

4.6. Status

…………………………………………………………………………………………………….21

4.7. Advanced Wireless

…………………………………………………………………………………...23

4.8. Access Filters

…………………………………………………………………………………………..26

4.9. Virtual Server

…………..……………………………………………………………………………….29

4.10. Routing

Table

…………………………………………………………………………………………31

4.11. Dynamic DNS

……………….………………………………………………………………………..33

. Troubleshooting.................................................................................................... 34

User’s Guide

1. Introduction

Thank you for purchasing your AP Router Wireless 802.11g AP Router.

This user guide will assist you with the installation procedure.

The package you have received should contain the following items:

 AP Router Wireless 802.11g AP Router

 User Guide

 Power Supply / Cord

 Ethernet Cable

Note: if anything is missing, please contact your vendor

User’s Guide

2. Safety Notification

Your Wireless AP Router should be placed in a safe and secure location. To ensure proper operation,

please keep the unit away from water and other damaging elements. Please read the user manual

thoroughly before you install the device. The device should only be repaired by authorized and

qualified personnel.

 Please do not try to open or repair the device yourself.

 Do not place the device in a damp or humid location, i.e. a bathroom.

 The device should be placed in a sheltered and non-slip location within a temperature range of

+5 to +40 Celsius degree.

 Please do not expose the device to direct sunlight or other heat sources. The housing and

electronic components may be damaged by direct sunlight or heat sources.

User’s Guide

3. Hardware Installation

Front Panel

The front panel provides LED’s for device status. Refer to the following table for the meaning of each

feature.

LED STATUS Description

Off No power

Red On

1. Power on 2. Reset to default 3. Firmware upgrade (first 1

minute)

PWR/STAT

Red Blink

1. System up 2. Power on 3. Firmware upgrade

Off no Ethernet link detected

Green On

10/100Mbps Fast Ethernet link detected. No activity.

LAN

Green

Blink Indicates data traffic on the 10/100 Mbps LAN

WAN Orange

Blink Indicates data traffic on the 10/100 Mbps LAN

G Yellow

Blink

Indicates the device is linking or active data through wireless

links

Rear Panel

The rear panel features 4 LAN ports, 1 WAN port and Reset button. Refer to the following table for the

meaning of each feature.

Power (DC 5v)

Used to connect to the power outlet. Only use the power

adapter provided with the device. Use of an unauthorized

power adapter may cause damage to your device and

violate your warranty.

Reset

Press the Reset Button for approximately ten seconds, all

configurations will set to factory default settings.

LAN The RJ-

45 Ethernet ports used to connect your PC, hub,

switch or Ethernet network.

WAN The RJ-

45 Ethernet port labeled WAN is used to connect

your AP Router to your xDSL or Cable modem.

AP Router Default Settings

The default settings are shown following.

User

Password admin

AP Router IP

Address 192.168.1.1

AP Router Subnet

Mask 255.255.255.0

RF ESSID wlan-g

11g RF Channel 6

Mode 11b+11g

Encryption Disabled

DHCP client Enabled

User’s Guide

Web Management Settings

START UP & LOGIN

In order to configure the Wireless 11g AP Router, you must use your web browser and manually input

http://192.168.1.1 into the Address box and press Enter. The Main Page will appear.

In order to configure the Wireless 11g AP Router, you must input the password into the Password box

and leave blank on the User Name box. The default password is “admin”.

Once you have logged-in as administrator, it is a good idea to change the administrator password to

ensure a secure protection to the Wireless 11g AP Router. The Security Settings section described

later in this manual describes how to change the password.

Once you have input the correct password and logged-in, the screen will change to the Setup page

screen.

TURN ON POWER SUPPLY

Quick power cycle can caused system corruption. When power on, be careful not to shut down in

about 5 seconds, because data is writing to the flash.

User’s Guide

4.1. Primary Setup

Primary Setup

This screen contains all of the Router's basic setup functions.

Most users will be able to configure the AP Router and get it working properly using the settings on

this screen. Some Internet Service Providers (ISPs) will require that you enter AP Router Wireless

802.11g AP Router specific information, such as User Name, Password, IP Address, Default Gateway

Address, or DNS IP Address. This information can be obtained from your ISP, if required.

WAN:

MAKE CORRECT NETWORK SETTINGS OF YOUR COMPUTER

To change the configuration, use Internet Explorer (IE) or Netscape Communicator to

connect the

WEB management 192.168.1.1.

User’s Guide

Host Name: This entry is necessary for some ISPs and can be provided by them.

Domain Name: This entry is necessary for some ISPs and can be provided by them.

Configuration Type: The Router supports four connection types:

Dynamic IP Setting

Static IP Address

PPPoE (Point-to-Point Protocol over Ethernet)

PPTP (Point-to-Point Tunneling Protocol)

These types can be selected from the drop-down menu next to Internet Connection. The information

required and available features will differ depending on what kind of connection type you select.

Some descriptions of this information are included here:

Internet IP Address and Subnet Mask

This is the Router's IP Address and Subnet Mask as seen by external users on the

Internet (including your ISP). If your Internet connection requires a static IP address,

then your ISP will provide you with a Static IP Address and Subnet Mask.

• Default Gateway

Your ISP will provide you with the Gateway IP Address.

• DNS (Domain Name Server) IP Address

Your ISP will provide you with at least one DNS IP Address.

• User Name and Password

Enter the User Name and Password you use when logging onto your ISP through a

PPPoE or PPTP connection.

• Connect on Demand

You can configure the Router to disconnect your Internet connection after a specified

period of inactivity (Max Idle Time). If your Internet connection has been terminated due

to inactivity, Connect on Demand enables the Router to automatically re-establish your

connection as soon as you attempt to access the Internet again. If you wish to activate

Connect on Demand, click the radio button.

If you want your Internet connection to remain active at all times, enter 0 in the AP

Router 802.11g AP Router max Idle Time field. Otherwise, enter the number of minutes

you want to have elapsed before your Internet connection terminates.

• Keep Alive Option

This option keeps you connected to the Internet indefinitely, even when your connection

sits idle. To use this option, click the radio button next to Keep Alive. The default Redial

Altri manuali per TEW-411BRP

Indice

Altri manuali TRENDnet Router wireless

TRENDnet

TRENDnet TEW-611BRP Manuale utente

TRENDnet

TRENDnet AC750 Manuale utente

TRENDnet

TRENDnet TEW-231BRP Manuale utente

TRENDnet

TRENDnet TEW-691GR Manuale utente

TRENDnet

TRENDnet TEW-811DRU Manuale utente

TRENDnet

TRENDnet TEW-817DTR Manuale utente

TRENDnet

TRENDnet TEW-651BR Manuale utente

TRENDnet

TRENDnet TEW-431BRP Manuale utente

TRENDnet

TRENDnet TEW-711BR Manuale utente

TRENDnet

TRENDnet TEW-635BRM - Wireless Router Manuale utente

TRENDnet

TRENDnet TEW-635BRM - Wireless Router Manuale utente

TRENDnet

TRENDnet TEW-652BRP Manuale utente

TRENDnet

TRENDnet TEW-452BRP - 108Mbps Wireless Super G Broadband... Manuale utente

TRENDnet

TRENDnet TEW-812DRU Manuale utente

TRENDnet

TRENDnet TEW-712BR Manuale utente

TRENDnet

TRENDnet TEW-654TR - 300Mbps Wireless N Travel Router Manuale utente

TRENDnet

TRENDnet TEW-211BRP Manuale utente

TRENDnet

TRENDnet TEW-751 DR Manuale utente

TRENDnet

TRENDnet TEW-432BRP - Wireless Router Manuale utente

TRENDnet

TRENDnet TEW-813DRU Manuale utente

TRENDnet

TRENDnet TEW-435BRM - 54MBPS 802.11G Adsl Firewall M Manuale utente

TRENDnet

TRENDnet TEW-831DR Manuale utente

TRENDnet

TRENDnet TEW-750DAP Manuale utente

TRENDnet

TRENDnet TEW-672GR Manuale utente

Manuali Router wireless popolari di altre marche

Milesight

Milesight UG67 Manuale utente

Airlogic

Airlogic AirSync Class 1 Manuale del proprietario

Samsung

Samsung WCH730B Manuale utente

TELEFONICA

TELEFONICA USB Adapter Manuale utente

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuale utente

Askey

Askey RAC2V1K Manuale utente

Alloy

Alloy WLF2454AP-S Manuale utente

TP-Link

TP-Link TL-WR542G Manuale utente

NETGEAR

NETGEAR WNR2000v4 Manuale utente

Hama

Hama 53120 Manuale utente

Intellinet

Intellinet 524582 Manuale utente

Asus

Asus RT-N10P Manuale utente

D-Link

D-Link DIR-506L Manuale utente

Sapido

Sapido GR297n Manuale utente

Asus

Asus DSL-N55U Manuale utente

AMTC

AMTC WR7502 Manuale utente

Compaq

Compaq CP-2W - iPAQ Connection Point Manuale utente

SMC Networks

SMC Networks WBR14-N2 FICHE Manuale utente