Triax 492090 Manuale utente

| GB |891072E

TDX Headend Unit - Art. No. 492090

User guide

Contents

Introduction............................................................................................................................ 4

Box content............................................................................................................................ 5

Unit - exterior......................................................................................................................... 5

Unit - interior.......................................................................................................................... 6

Mounting ................................................................................................................................ 8

Earthing ................................................................................................................................. 9

Input modules ....................................................................................................................... 9

Output modules .................................................................................................................. 12

CAM/Smart card ................................................................................................................ 14

Small Form-factor Plugable (SFP) ..................................................................................... 14

Connecting units ................................................................................................................. 15

ID switch ............................................................................................................................ 18

Power and RF output .......................................................................................................... 19

LEDs ..................................................................................................................................... 20

Conﬁguration of system ..................................................................................................... 22

Log in.................................................................................................................................... 23

System window ................................................................................................................... 24

System information............................................................................................................ 25

Communication icon.......................................................................................................... 26

Administration window ....................................................................................................... 26

Language settings ............................................................................................................. 27

Country settings................................................................................................................. 28

Time zone settings............................................................................................................. 29

Password settings ............................................................................................................. 31

Licence handling................................................................................................................ 32

IP settings .......................................................................................................................... 33

Save settings ..................................................................................................................... 36

Create a new system conﬁguration................................................................................... 37

Save conﬁguration .............................................................................................................. 38

Change system conﬁguration............................................................................................ 38

IPTV window ........................................................................................................................ 39

IPTV conﬁguration window ................................................................................................ 40

Status information ............................................................................................................. 43

Delete IP group ................................................................................................................. 44

Log ﬁle.................................................................................................................................. 45

Update ﬁrmware.................................................................................................................. 48

Reboot system..................................................................................................................... 53

Load to TDX ......................................................................................................................... 54

Load from TDX..................................................................................................................... 55

Conﬁguration of modules................................................................................................... 56

Technical data...................................................................................................................... 57

Your notes ....................................................................................................................... 58-59

Manufacturer ....................................................................................................................... 60

Declaration of conformity................................................................................................... 60

Safety Precautions

Environment Operating temperature from -10 C to +50 C.

Storage temperature from -20 C to + 70 C.

Max. operating humidity 80% (RH).

Max. storage humidity 90% (RH).

Power supply The input voltage must be 190-264 VAC. ~ 45/65 Hz / 280 W (Max).

Use only power connections installed by professionals.

Ventilation The way you position the headend units must leave a minimum of

10 cm on each side of the units for ventilation.

If you position the headend units side by side, the distance between the

units must be at least 20 cm.

Disposal Within in the European Union this label indicates that the product

cannot be disposed of with the general household waste.

Neither the headend nor the input and output modules can be dis-

posed of with the general household waste.

For proper treatment and recycling of old products, please take

them to designated collection points in accordance with your na-

tional legislation.

Earth Every unit in your headend system must be earthed by connecting it

to the ground with a wire according to the electrical regulations of your

country.

Safety precautions

Introduction

With the TDX headend system, Triax introduces the TDX IP-pool which

provides you with the full freedom of assigning services from any input

to any set of output modules.

All incoming signals from input modules initially arrive in the TDX IP-pool.

From this pool they can be converted into any output signals you require

while simultaneously being fed to several different output modules.

Besides, the conﬁguration of input and output modules can be readily

changed at any time.

The ability of converting any input signal to any output signal makes the T

DX headend system uniquely ﬂexible, efﬁcient and economical.

Introduction

Unpacking

Included in the box you will ﬁnd the TDX headend unit, key, brackets, Torx®

key, screws, a power lead and a user guide.

Box content

Unit - exterior In order to make it easy for you to work with a TDX headend unit you can re-

move the door and the top from the unit.

Everything you need to do in connection with the headend unit you can do

from the front of the unit.

Note Before you leave a headend system, the extractor fan in the output

section must be clicked into place in the middle of this section and

the door must be closed due to heat and EMC.

TDX Unit

Unit - interior Inside the TDX unit the interior is divided into two parts, an upper part - input

section - containing all the input modules, and a lower part - output section -

containing all the output modules.

In the input section covers are used to protect all module slots.

For EMC reasons only remove covers from the module slots that you want to

insert modules into.

Extractor fans have been placed in both the input section and the output

section of the unit to prevent the unit from overheating.

In the output section you can slide the cover with the extractor fans from one

side of the output section to the other when you want to install or replace

output modules.

Below you can see an empty headend unit without the front and top.

TDX Unit

RF output Distributes the RF channels from the output modules

using an F-connector.

Test point -20 dB RF test point of output (-20 dB).

Conﬁguration port Ethernet conﬁguration port for setting up the head-

end system. Connector type is RJ-45 and cable type

is Cat7. Use a computer/laptop with the software

recommended below to conﬁgure the system.

Recommendations:

Operating system: Windows XP or above.

Browser: Windows Internet Explorer version 6.0 or

above.

Additional software: Microsoft© Silverlight Runtime

version 3.0 or above.

Aux 1 & 2 For future use.

Unit link 1 & 2 Connects the main unit with subunits 1 and 2.

Unit ID switch Switch for setting the ID of the main unit and the two

subunits.

Note When you attach F-connectors to the RF

output and Test point sockets you have to be

very careful when you tighten the F-connec-

tors or you may destroy the sockets.

Secure Digital (SD)

card

Memory card for storage of the system conﬁgura-

tion. Placed in a slot behind the front cover.

Mounting Depending on whether you want to mount the headend unit in a rack or on a

wall you have to position the brackets accordingly on the headend unit.

To mount the headend unit on a wall, screw the brackets to the back of the

unit before you mount it.

To mount the headend unit in a rack, screw the brackets to the front of the

unit before you mount it.

Mounting the Unit

Input modules It is possible to install up to 16 input modules in a headend unit.

Earthing/Input

Earthing The headend unit must be earthed before you install any modules, i.e. you

have to connect each headend unit to the ground with a wire from the Earth

terminal socket.

It is optional in which slots you place the individual input modules in the input

section. For convenience each slot has been given a number. An overview of

the slot numbers has been placed on the inside of the door of each unit.

Note Slot no. 1 is placed in the top left-hand corner of the input section

when you face the front of the unit.

Input

Each input module has a LED on the front to signal whether the module is

locked or not to the frequency that it is set to receive at.

You can remove an input module from a module slot without using any tools,

just use your ﬁngers.

You install an input module by sliding the module into a module slot in the

upper section of the headend unit and click the module into place.

The module has not been conﬁgured yet.

Green - ﬂashing

No errors and the tuner is locked to the frequency.

Green

Error and the tuner is not locked to the frequency.

Red

Power has not been switched on.

No colour

When you update the software of a module the status LED provides you with

information about the updating process.

Indice

Altri manuali Triax Punto di accesso wireless

Triax

Triax TECW 211 Manuale utente

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente