Triplett 9055 Manuale utente
Model 9055
6-in-1 EnviroMeter with Sound
Light, Temperature and Humidity
Instruction Manual
TRIPLETT
84-896
10/10
1
TABLE OF CONTENTS
TITLE
1. INTRODUCTION………………………………………2
2. SAFETY INFORMATION …………………………4
3. FEATURES……………………………………………18
4. SPECIFICATIONS……………………………………19
5. CONTROL LOCATIONS AND DESCRIPTIONS…. 26
6. OPERATING INSTRUCTIONS …………………… 29
7. MAINTENANCE ………………………………………. 36
8. WARRANTY ……………………………………………38
2
1. INTRODUCTION
The Triplett 9055 6-in-1 Digital Multi-Tester is an autoranging
ruggedized 3-3/4 digit (4000 count) precision Digital
Multimeter with a large backlit high contrast LCD display and
expanded measurement capabilities. In addition to the
measurements performed by conventional multimeters, the
9055 also measures Sound Level, Light Level, Humidity, and
Temperature. A built-in Non-Contact Voltage Sensor detects
and indicates the presence of dangerous AC voltages.
The 9055’s offering of conventional multimeter measurement
features includes AC and DC Voltage and Current,
Resistance, Continuity, Diode Test, Capacitance, Frequency,
and Duty Cycle.
The overmolded housing provides impact and drop
resistance in a sleek ergonomic package, and the convenient
Auto Power Off feature maximizes battery life. Its industry
leading CAT IV design provides superior resistance to
damage from transient overvoltages such as those
experienced in demanding industrial settings.
Test Equipment Depot - 800.517.8431
99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
3
The dBC Sound Level function is useful for measuring noise
in factories, schools, hospitals, offices, airports, homes,
etc….. and checking the acoustics of studios, auditoriums,
churches, home theater installations, etc.
The Light Level function measures illumination in Lux on two
ranges. Its silicon sensor is very stable and fully cosine
corrected for the angular incidence of light.
Temperature is measureable in the meter itself or at the tip of
the provided temperature probe.
Relative Humidity is measured and displayed continuously
along with the room temperature, providing a convenient
reference for all other measurements.
The 9055 is well suited for use in all test environments, from
occasional use in residential applications, to everyday use
by installers, home theater technicians, security technicians,
electricians, HVAC technicians, and other professionals in
the electrical and electronics industry.
4
2
．
．．
．
SAFETY INSTRUCTIONS
This meter has been designed with safety in mind, but like all
products of this type, must be operated carefully to obtain the
best performance and avoid injury.
NEVER apply voltage or current to the meter that exceeds
the following specified limits:
Input Protection Limits
Function Maximum Input
Volts AC / DC
600V AC / DC rms CAT IV
1000V DC CAT III
700V AC CAT III
mA AC / DC 400mA / 660V AC / DC rms
A AC / DC 10A / 600V for 30 seconds max
every 15 minutes
Frequency, Resistance,
Capacitance, Duty
Cycle, Diode Test,
Continuity, Temperature
600V AC / DC rms
This symbol on the product means to refer to this
manual for safety cautions or warnings.
This symbol on the product means that dangerous
voltages may be present. Use caution.
5
2.1 Read all instructions in this manual before using
this meter. Failure to do so may result in damage to
the meter or injury to the user.
2.2 Prior to using the meter in any situation which could
result in injury to the user, in order to verify that the
meter is functional and producing a valid reading,
test the meter on a circuit(s) known to have
potentials equivalent to the potential that is to be
measured. For example, before using the meter to
determine if an AC power line is energized with
120VAC, test the meter on a line known to be
energized with 120VAC. Failure to do so may result
in damage to the meter or injury to the user.
2.3 Do not use this meter with its case open, or with
parts removed. Doing so may damage the meter
and/or injure the user.
2.4 When using this meter in schools and workshops,
responsible teachers or skilled personnel must
control the usage of this meter. Failure to observe
this precaution may result in damage to the meter
or injury to the user.
6
2.5 Follow the recommendations of any Trade
Organizations or Regulatory Agencies whose
scope encompasses the use of this meter. Failure
to do so may result in damage to the meter or injury
to the user.
2.6 Do not open this meter for maintenance without first
disconnecting the test leads from all external
circuitry. Failure to observe this precaution may
result in damage to the meter or injury to the user.
2.7 Repairs and maintenance must only be carried out
by qualified service personnel or qualified
electricians / technicians who know the dangers of,
and the safety rules applicable to this type of
equipment. Failure to observe this precaution may
result in damage to the meter or injury to the user.
2.8 Always set the meter to the appropriate range or
mode before connecting it to the circuitry to be
tested. Failure to observe this precaution may result
in damage to the meter or injury to the user.
7
2.9 Check the condition of the test leads before making
a measurement. Do not use the test leads if there is
damaged insulation or exposed metal. Failure to
observe this precaution may result in damage to the
meter or injury to the user.
2.10 Make sure test leads are properly inserted and
seated in the meter's input jacks. A loose test lead
may cause the user to believe that no hazard exists,
when in fact, dangerous voltages or currents may
be present. Failure to observe this precaution may
result in damage to the meter or injury to the user.
2.11 Do not touch the tips of the test leads when making
a measurement. Do not touch live circuitry when
making a measurement. Failure to observe this
precaution may result in damage to the meter or
injury to the user.
2.12 Before using the meter, examine both the meter
and the test leads for damage. Do not use the
meter if damage (damaged insulation, exposed
metal, cracked case, burnt smell, etc.) is evident.
8
Failure to observe this precaution may result in
damage to the meter or injury to the user.
2.13 Insert the test leads in the jacks specified in the
instructions for performing particular tests.
Inserting the test leads in incorrect jacks can
damage the meter and/or injure the user.
2.14 Do not exceed the maximum voltage or current
limitations of the meter. Doing so may damage the
meter and/or injure the user.
2.15 Do not apply voltage or current to the input of the
meter when it is set to any of the Ohms ranges.
Doing so may damage the meter and/or injure the
user.
2.16 Do not apply voltage or current to the input of the
meter when it is set to the Diode Test
,
Continuity Beeper , Capacitance
CAP
, or
F
or
C
modes. Doing so may damage the meter and/or
injure the user.
Test Equipment Depot - 800.517.8431
99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
Indice
Altri manuali Triplett Multimetro
Triplett
Triplett 1101-A Manuale utente
Triplett
Triplett MM300 Manuale utente
Triplett
Triplett 9007 Manuale utente
Triplett
Triplett 9045 Manuale utente
Triplett
Triplett MM200 Manuale utente
Triplett
Triplett 1401 Manuale utente
Triplett
Triplett 1101-B Manuale utente
Triplett
Triplett MM650 Manuale utente
Triplett
Triplett MM525 Manuale utente
Triplett
Triplett 9007-A Manuale utente
Triplett
Triplett MM350 Manuale utente
Triplett
Triplett 3303 Manuale utente
Triplett
Triplett CM24 Manuale utente
Triplett
Triplett 1301 Manuale utente
Triplett
Triplett 2103 Manuale utente
Triplett
Triplett 1101-NIST Manuale utente
Triplett
Triplett 2202 Manuale utente
Triplett
Triplett 60 Manuale utente
Triplett
Triplett 9015-A Manuale utente
Triplett
Triplett 1101-B Manuale utente
Manuali Multimetro popolari di altre marche
Gossen MetraWatt
Gossen MetraWatt METRAmax 6 Manuale utente
PeakTech
PeakTech 4000 Manuale per l'uso e la cura
YOKOGAWA
YOKOGAWA 90050B Manuale utente
Gossen MetraWatt
Gossen MetraWatt METRALINE DMM16 Manuale utente
Fluke
Fluke 8846A Manuale operativo e di manutenzione
Tempo Communications
Tempo Communications MM200 Manuale utente
