Triplett TMP60 Manuale utente

User Manual

TMP60

Dual Input Type J/K Thermometer

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Introduction

Congratulations on your purchase of the Triplett TMP60 Digital

Thermometer with J/K - type dual input. This meter is shipped fully

tested and calibrated and, with proper use, will provide years of reliable

service.

Features

1. Large backlit display shows any combination of T1, T2, T1-

T2, plus MAX, MIN, AVG.

2. Relative time clock on MAX MIN and AVG provides a time

reference for major events.

3. Electronic Offset function allows compensation of thermocouple

errors to maximize overall accuracy.

4. Readout in °C, °F, or Kelvin (K).

5. Auto Power Off mode (Sleep mode) increases battery life.

Safety

1. To prevent personal injury or meter damage, use the meter only

as specified in this guide

2. If the low battery indicator appears, replace the batteries

immediately. Inaccurate temperature reading could result from

low battery voltage.

3. Do not operate the meter in an explosive atmosphere

WARNING

To avoid electrical shock or personal injury, do not apply more

than 20Vrms between the thermocouple inputs or between the

thermocouple and earth ground

Do not leave batteries and packing material lying around

unattended; they can be dangerous for children if they use them

as toys

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Meter Description

Meter

1. T1 Thermocouple input connector

2. T2 Thermocouple input connector

3. Function buttons (Hold, MAX/MIN, Set)

4. Function buttons (Power, Enter,T1 T2

T1-T2, C-F-K)

5. Battery compartment (rear)

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Operation

Connecting thermocouples

1. This meter accepts one or two K or J-type thermocouples with

spade lugs (sub-miniature type with one spade wider than the

other).

2. Plug the thermocouple(s) into the meter's thermocouple input

jack(s).

Measuring

1. Press the button to turn on the thermometer on. After 1

second the thermometer will display the T1 reading in the upper

display and the T2 reading in the lower display. The display will

indicate dashes (----) if no thermocouple is connected to the

input.

2. Press the C-F-K button to select the desired temperature

unit of measure. A display icon will reflect the selection.

3. Contact the object to be measured with the probe. Read the

measured temperature in the display.

measurement range. The display shows "- - - -" when a

thermocouple is not connected.

MAX/MIN/AVG mode

Press the MAX/MIN button to begin recording the Maximum,

Minimum and Averag REC MAX

appear on the display and the elapsed time display will appear.

1. Press MAX/MIN to enter this mode.

2. Press MAX/MIN to step through maximum, minimum and average

readings.

3. Press and hold MAX/MIN for 3 seconds to return to normal mode.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Data Hold

Press the HOLD button to freeze the reading in the display. HOLD will

appear at the top right of the display. Press the HOLD button again to

return to normal operation mode.

T1 T2 T1-T2

Press the T1 T2 T1-T2 button to cycle through the four display

combinations.

No. Upper Display Lower display

1 T1 T2

2 T2 T1

3 T1-T2 T1

4 T1-T2 T2

Press the button to select the displayed temperature units

Backlight

Press the SETUP button to turn the LCD backlight ON/OFF.

Setup Mode Options

Use the Setup mode to select the thermocouple type, program a

display offset, or disable/enable the sleep mode. The thermometer

stores the settings in its memory.

Press and hold the SET button for 3 seconds to enter or exit the Setup

mode. When the thermometer is in Setup mode, the display shows the

SETUP icon. Use the ENTER buttons or the arrow buttons to scroll

parameters.

Set Type J or K thermocouple

o From within the Setup mode (see the Setup Mode Options

paragraph above for accessing Setup mode) use the or

p Press ENTER to access the parameter.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

q Use the button to toggle between J and K.

r Press ENTER to save the setting.

s Press and hold the SET button for 3 seconds to return to the

normal operating mode or press ENTER to move to the

Set Sleep/Non-sleep mode

The thermometer enables the sleep mode option by default

where the meter will automatically shut off after 20 minutes of

inactivity.

o From within the Setup mode (see the Setup Options paragraph

above for accessing Setup mode) use the or button to

p Press ENTER to access the parameter.

q Use the button to select ON (sleep mode enable) or OFF (sleep

mode disabled).

r Press ENTER to store the new setting in memory.

s Press and hold the SET button for 3 seconds to return to the

normal operating mode or press ENTER

offset setting.

Set T1 or T2 Offset

Use the offset feature (T1 or T2 Setup menu item) to adjust the

at a specific temperature. The allowable adjustment range is ± 5.0°C or

± 9.0 °F.

1. Plug the thermocouple into the input connector.

2. Place the thermocouple into a known, stable temperature

environment (such as an ice bath or dry well calibrator). Allow the

reading to stabilize.

3. From within the Setup mode (see the Setup Mode Options

paragraph above for accessing Setup mode) press or to

ENTER.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

4. Use the arrow or buttons to adjust the offset. The lower digits

show the offset amount while the upper digits show the actual

temperature with the offset applied.

5. Press the ENTER button to store the value and move to the next

parameter.

6. Press and hold the SET button for 3 seconds to return to normal

mode.

Replacing the Batteries

If the low battery icon appears, replace the batteries immediately to

avoid inaccurate readings.

1. Turn off the thermometer.

2. Loosen the screw and remove the battery door.

3. Replace the AAA batteries.

4. Replace the battery door and tighten the screw.

You, as the end user, are legally bound (EU Battery

ordinance) to return all used batteries, disposal in the

household garbage is prohibited! You can hand over

your used batteries / accumulators at collection points in

your community or wherever batteries / accumulators are

sold!

Disposal: Follow the valid legal stipulations in respect of

the disposal of the device at the end of its lifecycle

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Specifications

Temperature Range:

K type

thermocouples

-328°F to 2501°F (-200°C to 1372°C) (73°K to

1645°K)

J type

thermocouples

-346°F to 2012°F (-210°C to 1100°C) (63°K to

1373°K)

Temperature accuracy:

T1, T2

>-148°F (

100°C) ± [0.15%rdg+1.8°F (1°C)]

T1, T2

<-148°F (

100°C) ± [0.5%rdg+3.6°F (2°C)]

T1-T2 ± [0.5%rdg+1°C (1.8 °F)]

Display Resolution: 0.1°<1000°, 1°>1000°

Battery:

Operating Temperature: 32°F to 122°F (0°C to 50°C)

Storage Temperature: 14°F to 122°F (10°C to 50°C)

Dimensions:

Weight: 7 oz. (200g)

Warranty

Triplett / Jewell Instruments extends the following warranty to the original purchaser of

these goods for use. Triplett warrants to the original purchaser for use that the products

sold by it will be free from defects in workmanship and material for a period of (1) one

year from the date of purchase. This warranty does not apply to any of our products

which have been repaired or altered by unauthorized persons in any way or purchased

from unauthorized distributors so as, in our sole judgment, to injure their stability or

reliability, or which have been subject to misuse, abuse, misapplication, negligence,

accident or which have had the serial numbers altered, defaced, or removed.

Accessories, including batteries are not covered by this warranty

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Triplett Termometro

Triplett

Triplett IRT227 Manuale utente

Triplett

Triplett RHT415-NIST Manuale utente

Triplett

Triplett IRT220 Manuale utente

Triplett

Triplett TMP15 Manuale utente

Triplett

Triplett FT2020 Manuale utente

Triplett

Triplett IRTUV50 Manuale utente

Triplett

Triplett ProTemp PT12A Manuale utente

Triplett

Triplett TMP10 Manuale utente

Triplett

Triplett TMP50 Manuale utente

Triplett

Triplett TPM10 Manuale utente

Triplett

Triplett IRT350 Manuale utente

Triplett

Triplett IRT225 Manuale utente

Triplett

Triplett TMP60 Manuale utente

Triplett

Triplett CM675IR Manuale utente

Triplett

Triplett IRT500 Manuale utente

Triplett

Triplett RHT12 Manuale utente

Triplett

Triplett TMP10 Manuale utente

Triplett

Triplett ProTemp 6 Manuale utente

Triplett

Triplett RHT70 Manuale utente

Triplett

Triplett ProTemp 12 Manuale utente

Triplett

Triplett IRT150 Manuale utente

Triplett

Triplett TMP10 Manuale utente

Triplett

Triplett RHT415 Manuale utente

Manuali Termometro popolari di altre marche

Delton

Delton 981A Manuale utente

Baker

Baker MM2P Manuale utente

Tarmo

Tarmo 320281 Manuale utente

Citizen

Citizen CTD 504 Manuale utente

TFA

TFA 14.1500 Manuale utente

Vive

Vive DMD1010 Manuale utente

Gotemp

Gotemp THB4002 Manuale utente

GREISINGER

GREISINGER G 1202 Manuale utente

Amprobe

Amprobe TMD-53W Manuale utente

Trotec

Trotec BP10 Manuale utente

Radiance instruments

Radiance instruments RT616 Series Manuale utente

Eurolec

Eurolec IR151 Manuale utente

Scaneo

Scaneo TS42B Manuale utente

Sper scientific

Sper scientific 800043 Manuale utente

Microlife

Microlife NC 200 Manuale di istruzioni

Motorola

Motorola MBP69SN Guida alla configurazione

The MeatStick

The MeatStick The MeatStick Manuale utente

Hama

Hama TH35-A Manuale utente