Tripp Lite B126-1D1-WHD1 Manuale utente
1
Owner’s Manual
1111 W. 35th Street, Chicago, IL 60609 USA
tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
Wireless HDMI/DisplayPort
Extender with IR Control
Model: B126-1D1-WHD1
Español 13 • Français 24 • Русский 35
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
surge protector in our monthly drawing!
tripplite.com/warranty
2
Package Contents
Optional Accessories
• Mini Transmitter Unit
• Receiver Unit
• IR-In (Rx) Cable
• IR-Out (Tx) Cable
• USB-A to Micro-B Cable, 3 ft.
• DisplayPort to HDMI Adapter
• Right-Angle HDMI Adapter
• External Power Supply
(Input: 100-240V, 50/60 Hz, 0.35A; Output: 5V 2A)*
• Mounting Hardware
• Owner’s Manual
*Includes NEMA 1-15P (North America), CEE 7/16 Schuko (Europe), BS 1363 (UK)
and AS/NZS 3112 (Australia) plugs
• P568-Series High-Speed HDMI Cables
• U050-Series USB-A to Micro-B Cables
• U280-W01-QC3 USB Wall Charger with Quick Charge 3.0 Technology
3
Product Features
System Requirements
• All-in-one wireless extender kit extends 1080p (60 Hz) high definition
video and stereo audio up to 165 ft./50 m
•
IR control functionality lets you access the HDMI source device remotely
• Compatible with HDMI 1.3 and HDCP 1.2
• Supports up to 24-bit Deep Color (8 bits per channel)
• Supports maximum data transfer rate of 10.2 Gbps
• Uses a 5 GHz wireless frequency for faster data transmission and
reduced interference from other wireless sources
• Plug-and-play functionality with no cabling infrastructure needed
o No software or drivers required
o Mini Transmitter Unit directly connects to a laptop or other source
device
o Connect to a DisplayPort source using the included DisplayPort to
HDMI Adapter
o Supports point-to-point connection
• HDMI/DisplayPort Source Device
• HDMI Display Device
4
Product Description
Mini Transmitter Unit
1Wireless Indicator: LED will illuminate red when an HDMI signal is
obtained and will blink when data is transmitting
2Micro-B USB Port: Use the included USB cable to connect the Mini
Transmitter Unit to a powered device
3Power Indicator: LED will illuminate blue when power is being
received
4IR-Out (Tx) Port: Use the included IR-Out (Tx) cable to connect to
this port for remote control of the source device
Note: Make sure the source remote control is within the required range of IR
transmitter
5HDMI Input (Male): Connect to the HDMI port on the source device
1
5
5
2 3 4
5
Product Description
Receiver Unit
6Power Input: Connect the included power supply adapter to power
the Receiver Unit
7Wireless Indicator: LED will illuminate green when a signal is
received
8Data Transmission Indicator: LED will blink green when data is
transmitting
9HDMI Output (Female): Use an HDMI cable (not included) to
connect to the HDMI display
10
IR-IN (Rx) Port: Use the included IR-IN (Rx) cable to connect to this
port for remote control of the source device
Note: Make sure the source remote control is within the required range of IR
receiver
11
Antenna: Connect the included antenna blade to receive wireless
signals
IR IN
HDMI
OUTPUT
DC 5V, 2A
11
6 7 8 9
10
6
Installation
Notes:
•Make sure all equipment being connected is powered off prior to installation.
•Make sure to position the IR cables near the source device and HDMI display for
best results.
•If the wireless signal is obstructed by walls (especially brick or glass) or other
sources of interference, the quality and distance of the signal will likely be re-
duced.
HDMI Source Device
IR-OUT Cable USB Wall Charger IR-IN Cable
Mini Transmitter Unit Receiver
Unit
HDMI Display
HDMI Cable
Mini Transmitter Unit
1Connect the built-in HDMI connector on the Mini Transmitter Unit to
the HDMI source device.
Note: If experiencing a weak signal or signal loss, use the Right-Angle HDMI
Adapter to connect the Mini Transmitter Unit to the HDMI source device. The
Right-Angle HDMI Adapter will put the Mini Transmitter Unit in a vertical position
to strengthen the signal.
1
2
5
6
8
7
7
Installation
2Connect the IR-OUT (Tx) cable to the IR-OUT port on the Mini
Transmitter Unit.
Note: IR-OUT (Tx) cable has “IR-OUT” marked on the bottom of the IR bulb.
Place the bulb of the IR-OUT (Tx) cable in an area with a direct line of sight to
the HDMI source device.
3To power the unit, connect the included USB Micro-B cable between
the transmitter and a USB wall charger or a USB port on the source.
Receiver Unit
4Optional: Attach the included mounting hardware to the receiver unit
and mount it to a desired location.
5Attach the included antenna blade to the antenna port on the
receiver unit.
6Connect the HDMI display to the HDMI Output port on the receiver
unit using a P568-Series High-Speed HDMI Cable (sold separately).
7Connect the IR-IN (Rx) cable to the IR-IN port on the receiver unit.
Note: IR receiver cable has IR-IN marked on the bottom of the IR bulb. Place
the bulb of the IR receiver cable in the general area you will be using the
source device’s remote control.
8Connect the external power supply to the receiver unit, and plug it
into a Tripp Lite Surge Protector, Uninterruptible Power Supply (UPS)
or Power Distribution Unit (PDU).
9Turn on power to the connected equipment.
8
Troubleshooting
If you are unable to get an acceptable image after following the
installation instructions, try the following troubleshooting tips:
1. Is the included external power supply connected and plugged
into a working power source? For the product to function properly,
the receiver must be connected to and receiving power from an
external power supply.
2. Is the included USB cable connected between the USB Micro-B
port on the mini transmitter unit and a power source? The USB
Micro-B port on the mini transmitter unit must be connected to a USB
port on the source device or on a USB wall charger in order to power
the unit.
3. Was the power to the HDMI source turned off prior to
installation? If not, restart.
4. What resolution are you trying to reach? See the Product
Features and Installation sections in this manual for details on
maximum distance and resolution. If you are not able to get an
acceptable image, try lowering the source device’s video resolution or
adjusting the refresh rate.
5. Is your mini transmitter unit and receiver unit not connecting to
one other? If the wireless connection LED indicators are not blinking
correctly, restart either the mini transmitter or receiver unit, then
reconnect the HDMI connector or cable. Also, make sure the mini
transmitter and receiver units have a direct line of site to one other. If
the line of sight between them is blocked by windows or walls, or there
is no direct line of sight, the mini transmitter and receiver units will not
be able to establish a connection.
9
Troubleshooting
6. Is the Wi-Fi indicator on the receiver unit off and there is no
output signal on the display? If so, check that the HDMI signal
connection on the mini transmitter unit is illuminating solid. If the
signal is not solid, connect the source device directly to the display
device to see if the issue is with the source, display or HDMI cable you
are using.
7. Is the HDMI display transmitting a choppy picture? If so, make
sure the position of the mini transmitter and receiver units are in
the required range, then restart the units and reconnect the HDMI
connector and cable. If this does not work, check for other signal
disturbances between the transmitter and receiver.
8. Is the Mini Transmitter Unit experiencing signal loss or a weak
signal? If so, make sure to connect the included Right-Angle HDMI
Adapter between the HDMI source device and the Mini Transmitter
Unit. The Right-Angle HDMI Adapter will put the Mini Transmitter Unit in
a vertical position to strengthen the signal.
9. Test your cables to ensure they are working properly.
10. Are the mini transmitter and/or receiver units located in an area
that exposes them to elevated temperatures? If the product is
overheating, it will not function properly.
10
Specifications
Input Ports HDMI (Male), USB Micro-B (Female),
3.5 mm (Female)
Output Ports HDMI (Female), 3.5 mm (Female)
IR Frequency 20-60 Hz Wide Range
Transmission Distance 165 ft. / 50 m
External Power Mini Transmitter Unit: 5V 1A
Receiver Unit: 5V 2A
Power Consumption Mini Transmitter Unit: 3W
Receiver Unit: 5W
HDMI Version 1.3
HDCP Version 1.2
Maximum Video Resolution 1920 x 1080 / 1080p @ 60 Hz
Input Maximum Transfer Rate 10.2 Gbps
Transmission Method 5 GHz Wireless Transmission
MTBF >30,000 hours
Operating Temperature 32 to 104°F / 0 to 40°C
Storage Temperature -4 to 158°F / -20 to 70°C
Humidity 0 to 90% RH, Non-Condensing
Unit Dimension
(H x W x D, in inches)
Mini Transmitter Unit: 0.60 x 3.50 x 1.53
Receiver Unit: 0.74 x 3.82 x 3.07
Unit Dimension
(H x W x D, in mm)
Mini Transmitter Unit: 15.2 x 88.9 x 39
Receiver Unit: 18.8 x 97 x 77.9
Unit Weight (lb.) Mini Transmitter Unit: 0.07
Receiver Unit: 0.49
Unit Weight (g) Mini Transmitter Unit: 30
Receiver Unit: 220
Indice
Lingue:
Altri manuali Tripp Lite Estensione
Tripp Lite
Tripp Lite B126-1A1SR Manuale utente
Tripp Lite
Tripp Lite B130-101 Manuale utente
Tripp Lite
Tripp Lite B013-000 Manuale utente
Tripp Lite
Tripp Lite B127-1A1-WHD1 Manuale utente
Tripp Lite
Tripp Lite B130-101 Manuale utente
Tripp Lite
Tripp Lite B127A-1A1-FHFH Manuale utente
Tripp Lite
Tripp Lite P142-06N-SC4K Manuale utente
Tripp Lite
Tripp Lite B121-000 Manuale utente
Tripp Lite
Tripp Lite B118-2X4-4K-A Manuale utente
Tripp Lite
Tripp Lite P166-001-A Manuale utente
Tripp Lite
Tripp Lite B140-101X-U Manuale utente
Tripp Lite
Tripp Lite B150-1A1-HDMI Manuale utente
Tripp Lite
Tripp Lite B203-101 Manuale utente
Tripp Lite
Tripp Lite B136-101-WP-1 Manuale utente
Tripp Lite
Tripp Lite B127A-4X1-BH Manuale utente
Tripp Lite
Tripp Lite U007-40M Manuale utente
Tripp Lite
Tripp Lite Cat5 Smart KVM Extender Manuale utente
Tripp Lite
Tripp Lite B203-101-PNP Manuale utente
Tripp Lite
Tripp Lite B127-1A1-CH Manuale utente
Tripp Lite
Tripp Lite B126-1A1SR Manuale utente
