Tripp Lite B127-1A1-DH Manuale utente

Owner’s Manual

4K/60 DisplayPort over Cat6

Extenders and Splitters

Extender Kits Model: B127-1A1-DH

Splitters kit Models: B127-002-D2H, B127-004-D4H

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

Español 13 • Français 25 • Русский 37

19-01-458-93393A.indb 1 3/8/2019 2:42:22 PM

Package Contents

Product Features

B127-1A1-DH

B127-002-D2H

B127-004-D4H

Local Unit (L), Remote Unit (R) or Both (B) B B B

External Power Supplies 1 1 1

Mounting Hardware Y Y Y

All

• Support 4K video resolution (3840 x 2160 @ 60 Hz) and 4:4:4

chroma subsampling

• Support up to 7.1-channel surround sound audio

• DisplayPort 1.2a compatible

• Supports up to 8-channel LPCM, AC-3, DTS digital audio

• Plug and play—no software or drivers required

B127-1A1-DH

• DisplayPort over Cat6 Power-over-Cable (PoC) Extender Kit

• Extends a 4K (3840 x 2160 @ 60 Hz) signal up to 125 ft. (38 m)

from the source

• Additional HDMI port on the local transmitter unit allows connection of

a local monitor

19-01-458-93393A.indb 2 3/8/2019 2:42:22 PM

Product Features

• Remote receiver unit features built-in equalization (EQ) control and

auto EDID image adjustment

• Includes mounting hardware that allows both the local transmitter and

remote receiver units to be wall-mounted, rack-mounted or pole-

mounted

B127-002-D2H

• DisplayPort over Cat6 Power Over Cable (PoC) 2 Port Splitter/Extender

Kit

• Extends a 4K (3840 x 2160 @ 60 Hz) signal up to 125 ft. (38 m)

from the source

• Remote HDMI receiver units feature built-in equalization (EQ) control

and auto EDID image adjustment

• Kit includes a 2-Port Splitter Extender and two Remote Receivers

• Includes mounting hardware that allows unit to be wall-mounted, rack-

mounted or pole-mounted

B127-004-D4H

• DisplayPort over Cat6 Power-over-Cable (PoC) 4 Port Splitter/Extender

Kit

• Extends a 4K (3840 x 2160 @ 60 Hz) signal up to 125 ft. (38 m)

from the source

• Remote HDMI receiver units feature built-in equalization (EQ) control

and auto EDID image adjustment

• Kit includes a 4-Port Splitter Extender and four Remote Receivers

• Includes mounting hardware that allows unit to be wall-mounted, rack-

mounted or pole-mounted

• Additional HDMI port on the local transmitter unit allows connection of

a local monitor

19-01-458-93393A.indb 3 3/8/2019 2:42:22 PM

Product Features

Disclaimer

Optional Accessories:

• N202-Series Cat6 24 AWG Solid-Wire Patch Cables

• P569-XXX-CERT or P568-XXX-2A Series High-Speed HDMI 2.0 Cables

• P580-XXX DisplayPort Cables

Before installation, please check the following settings of your source(s)

and TV/monitor(s):

1. Set monitor to display at 60 Hz. Double check factory settings, as

default can be set to a lower frequency (Hz).

2. Ensure your monitor’s input setting is set to HDMI 2.0. Some displays

may have a default setting of HDMI 1.4

3. Verify your monitor has the HDR feature enabled. Some displays may

have this feature disabled as a default setting.

4. Check if the Ultra HD (UHD) Deep Color setting is enabled on your TV/

monitor. Conﬁrm with your TV/monitor manufacturer which HDMI ports

support UHD Deep Color.

Note: If wishing to connect a local monitor to your installation, depending on

your TV/monitor make/model, the UHD Deep Color setting may need to be

disabled on your local TV/monitor to achieve 4K 60 Hz resolution.

19-01-458-93393A.indb 4 3/8/2019 2:42:22 PM

Mounting Instructions (select models)

The B127-1A1-DH, B127-002-D2H and B127-004-D4H include

mounting hardware, allowing for a variety of mounting methods. The

following images illustrate how the included mounting brackets can be

attached for different installations.

Note: The model shown in the below images is for illustrative purposes only. Your

product may vary by model number, size or port orientation. The mounting options

for all over IP units are the same.

Wall-mount

19” Rack-mount Pole-mount

19-01-458-93393A.indb 5 3/8/2019 2:42:22 PM

Standard Extender Kit Installation

Notes:

• Test to ensure the entire installation works properly before pulling cables through

ceilings/walls.

• To achieve maximum distance and performance, use 24 AWG solid-wire Cat6

cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher

than 24 AWG. will result in shorter extension distance. Higher gauge cabling,

such as 26 AWG, has a more limited transmission capability than lower gauge

cabling. All Tripp Lite N202-Series Cat6 cables use 24 AWG solid-wire cabling.

• The installation diagram shows a B127-1A1-DH unit.

• External power is not required for the remote receiver due to Power-over-Cable

(PoC) technology incorporated in the transmitter unit.

B127-1A1-DH

Extender Kit

MONITOR PC

LOCAL

TRANSMITTER

REMOTE

RECEIVER

Up to 125 ft. (38 m) at 4K/60 Hz

Up to 125 ft. (38 m) Cat6 cable at 4K/60 Hz

Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz

Up to 15 ft. (4.5 m) DisplayPort cable at 4K/60 Hz

19-01-458-93393A.indb 6 3/8/2019 2:42:22 PM

Standard Extender Kit Installation

1. Make sure all equipment in the installation—such as TVs, Blu-ray

players and the transmitter—is powered OFF.

2. Using DisplayPort cables (such as Tripp Lite P580-XXX Series),

connect the DisplayPort source to the INPUT port on the

B127-1A1-DH local transmitter unit.

3. Optional for B127-1A1-DH: Using an HDMI 2.0 cable (such as

Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cable), connect

a local monitor to the LOCAL port on the B127-1A1-DH local

transmitter unit.

4. Using Cat6 cable, connect the RJ45 port on the local transmitter unit

to the RJ45 port on the remote receiver unit.

5. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or

P568-XXX-2A Series cable), connect the remote receiver unit’s HDMI

port to a monitor.

6. Power on all connected displays. The LOCAL (orange) LED will

illuminate to indicate the local port is connected to a display.

Connect the external power supply to the local transmitter unit and plug

it into an available wall outlet or (optional) a Tripp Lite Surge Protector,

Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS).

The POWER (green) LED will illuminate to indicate the unit is receiving

power from the external power supply. The POWER (green) LED on the

remote receiver unit will illuminate to indicate the unit is receiving power

from the local transmitter unit by way of PoC technology.

8. Turn on the power to the DisplayPort source. The OUTPUT (orange)

LED on the local transmitter unit will illuminate to indicate a signal is

received from the source.

9. The RJ45 (orange) LED will illuminate on both local transmitter and

remote receiver units to indicate a signal is being received from

source to display. The screen should now display on the connected

monitor.

19-01-458-93393A.indb 7 3/8/2019 2:42:22 PM

Standard Extender Installation

Notes:

• Test to ensure the entire installation works properly before pulling cables through

ceilings/walls.

• To achieve maximum distance and performance, use 24 AWG solid-wire Cat6

cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher

than 24 AWG. will result in shorter extension distance. Higher gauge cabling,

such as 26 AWG, has a more limited transmission capability than lower gauge

cabling. All Tripp Lite N202-Series Cat6 cables use 24 AWG solid-wire cabling.

• The installation diagram shows the B127-004-D4H local transmitter unit. The

B127-002-D2H installation is the same, except there are only two remote ports

and no local monitor port.

• External power is not required for the B127-100-H or B127-100-H-SR.

B127-004-D4H

extender kit

OPTIONAL

LOCAL MONITOR

B127-004-D4H

B127-100-H

B127-100-H-SR

B127-100-H

B127-100-H-SR

Up to 125 ft. (38 m) Cat6 cable at 4K/60 Hz

Up to 50 ft. (15 m) Cat6 cable at 4K/60 Hz

Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz

Up to 15 ft. (4.5 m) DisplayPort cable at 4K/60 Hz

19-01-458-93393A.indb 8 3/8/2019 2:42:22 PM

Standard Extender Installation

1. Make sure all equipment in the installation—such as TVs, Blu-ray

players and the transmitter—is powered OFF.

2. Using DisplayPort cables (such as Tripp Lite P580-XXX Series),

connect the DisplayPort source to the INPUT port on the

B127-002-D2H or B127-004-D4H local transmitter unit.

3. Optional for B127-004-D4H: Using an HDMI 2.0 cable (such as

Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cable), connect

a local monitor to the LOCAL port on the B127-004-D4H local

transmitter unit.

4. Using Cat6 cable, connect the RJ45 output port on the local

transmitter unit to the RJ45 port on the B127-100-H remote receiver

unit.

5. Repeat step 4 for each additional remote receiver unit being

connected.

6. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or

P568-XXX-2A Series cable), connect the B127-100-H’s HDMI port to

a monitor.

7. Repeat Step 6 for each additional remote B127-100-H receiver unit

in the installation.

8. Power on all connected displays. The LOCAL (orange) LED will

illuminate to indicate the local port is connected to a display.

9. Connect the external power supply to the B127-002-D2H or

B127-004-D4H local transmitter unit and plug it into an available

wall outlet or (optional) a Tripp Lite Surge Protector, Power Distribution

Unit (PDU) or Uninterruptible Power Supply (UPS). The POWER

(green) LED will illuminate to indicate the unit is receiving power from

the external power supply. On the B127-100-H, the POWER (green)

LED on the remote receiver unit will illuminate to indicate the unit is

receiving power from the extender/splitter.

19-01-458-93393A.indb 9 3/8/2019 2:42:22 PM

10. Turn on the power to the DisplayPort source. The (orange) LEDs on

the B127-002-D2H and B127-004-D4H will illuminate to indicate a

signal is received from the source. Additionally, the OUTPUT (orange)

LED will illuminate for each port signal connection.

11. The RJ45 (orange) LEDs on the B127-100-H will illuminate to

indicate a signal is being received from the extender/splitter. The

screen should now display on the connected monitor.

Standard Extender Installation

19-01-458-93393A.indb 10 3/8/2019 2:42:22 PM

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Tripp Lite Estensione

Tripp Lite

Tripp Lite B013-330 Manuale utente

Tripp Lite

Tripp Lite B051-000-AC Manuale utente

Tripp Lite

Tripp Lite 8TLB122000 Manuale utente

Tripp Lite

Tripp Lite U224-1R4-R Manuale utente

Tripp Lite

Tripp Lite B137-101 Manuale utente

Tripp Lite

Tripp Lite B127-1A1-CH Manuale utente

Tripp Lite

Tripp Lite P142-06N-SC4K Manuale utente

Tripp Lite

Tripp Lite B127A-1A1-BHBH Manuale utente

Tripp Lite

Tripp Lite B140-002-DD Manuale utente

Tripp Lite

Tripp Lite Cat5 Smart KVM Extender Manuale utente

Tripp Lite

Tripp Lite P130-000-AUD4K6 Manuale utente

Tripp Lite

Tripp Lite B140-101X-U Manuale utente

Tripp Lite

Tripp Lite B130-101A-MR Manuale utente

Tripp Lite

Tripp Lite B127U-111-PDPD Manuale utente

Tripp Lite

Tripp Lite B130-101S-WP Manuale utente

Tripp Lite

Tripp Lite B127F-1A1-MM-DD Manuale utente

Tripp Lite

Tripp Lite HDMI B122-000-60 Manuale utente

Tripp Lite

Tripp Lite B125-150 Manuale utente

Tripp Lite

Tripp Lite NPOE-EXT-2X1G30 Manuale utente

Tripp Lite

Tripp Lite B127A-4X1-BH Manuale utente

Tripp Lite

Tripp Lite BHDBT-K-E3SI-ER Manuale utente

Tripp Lite

Tripp Lite B130-202 Manuale utente

Tripp Lite

Tripp Lite B126-1P0-WP-1 Manuale utente

Tripp Lite

Tripp Lite B013-330 Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente