Tripp Lite OMNI1000ISO Manuale utente
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: [email protected]
Model #: OMNI1000ISO
OmniSmart 1000VA Tower Line-Interactive 120V UPS with built-in Isolation Transformer and USB port
Highlights
1000VA / 1kVA tower 120V line interactive UPS with isolation transformer
Corrects brownouts and overvoltages from 81V to 143V
USB port, Normal & common mode EMI/RFI line noise immunity
NEMA 5-15P input plug and 6 5-15R outlets
Description
Tripp Lite's OMNI1000ISO offers complete UPS protection with built-in line-interactive voltage regulation, intelligent monitoring and unattended
shutdown capability. Built-in isolation transformer with Faraday shield offers full isolation and complete common mode noise rejection. 1000VA
power-handling capacity supports point-of-sale applications, computers, internetworking equipment and home theater systems during commercial
power failures. Line-interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V back to normal 120V levels,
reserving battery power for use during complete power failures. Built-in USB communications port works with PowerAlert Software and cabling to
provide automatic unattended shutdown of connected network and PC applications.
Package Includes
OMNI1000ISO UPS System
USB cable
Owner's manual with warranty information
Features
1000VA line-interactive UPS with Faraday-shielded, low-impedance isolation transformer delivers full isolation from potential damage and
performance problems
Provides immunity from EMI/RFI line noise in both normal and common modes. Delivers clean signal-reference ground, reducing data
errors and audio/video distortion
Automatic voltage regulation (AVR) automatically corrects incoming voltage to keep equipment working through low voltage (brownouts) as
low as 81V and overvoltages as high as 143V without consuming battery power
Supports loads up to 1000VA/700W
Half-load runtime of 24 min. (500VA/350W); full load runtime of 8 min. (1000VA/700W)
5 diagnostic LEDs indicate AC present, on battery, voltage correction status, overload and battery low/replace
Electrostatic discharge (ESD) resistance reduces potential static damage to connected electronics
Built-in USB port and PowerAlert Software (free via web download) provide safe, unattended system shutdown during extended blackouts
Built-in surge suppression (backed by $200,000 Ultimate Lifetime Insurance) safeguards connected equipment against damage
SURGE VOLTAGE WITHSTAND CAPABILITY: ANSI/IEEE C62.41 Catagories A & B 6KV/200/500 amp 100Khz Ringwave and category B
BiWave
SURGE VOLTAGE ATTENUATION: N-G 2000:1, L-G 240:1, L-N 100:1
INSERTION LOSS: 65 db N-G from 10Khz to 100Khz, 45 to 60 db L-G from 10Khz to 100Khz, 18 to 54 db L-N from 50Khz to 500 Khz
6 UPS-supported AC outlets; 6-ft. cord
Specifications
OUTPUT
Output Volt Amp Capacity
(VA)
1000
Output kVA capacity (kVA) 1
Output Watt Capacity
(watts)
700
Output power factor 0.7
Nominal Output Voltage(s)
Supported
115V; 120V
Frequency compatibility 60 Hz
Output voltage regulation
(line mode)
-18%, +8%
Output voltage regulation
(Battery mode)
115V (+/- 5%)
Built-in UPS output
receptacles
6 5-15R outlet(s)
Basic PDU options PDU1215 (1U / 13 5-15R outlets); PDUNV (1U / 2 C19, 12 C13 outlets); PDU1415 (0U / 14 5-15R outlets);
PDUV15 (0U / 12 5-15R outlets)
Metered PDU options PDUMH15 (1U / 13 5-15R outlets); PDUMH15AT (1U / 8 5-15R outlets)*; PDUMV15 (0U / 16 5-15R outlets)
Switched PDU options PDUMH15ATNET (1U / 8 5-15R outlets)*; PDUMV15NET (0U / 16 5-15R outlets)
External PDU redundancy
options
*Auto Transfer Switch features utilizing the secondary PDU input cord are compatible with Smart Online UPS
models only
Output AC waveform (AC
mode)
Sine wave
Output AC waveform
(battery mode)
PWM sine wave
INPUT
Rated input current (at
maximum load)
7.6A
Nominal Input Voltage(s)
Supported
120V AC
UPS input connection type 5-15P
UPS Input cord length (ft.) 6
UPS Input cord length (m) 1.8
Recommended Electrical
Service
15A 120V
BATTERY
Full load runtime (minutes) 8 min. (700w)
Half load runtime
(minutes)
24 min. (350w)
DC system voltage (VDC) 36
Battery recharge rate
(included batteries)
Less than 4.5 hours from 10% to 90%
Replacement battery
cartridge (internal UPS
battery replacement)
RBC53
Battery Access Battery access door
Battery replacement
description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation
description
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 85 to 143
Overvoltage correction Input voltages between 128 and 143V are reduced by 9%
Undervoltage correction Input voltages between 96 and 107V are boosted by 10%
Severe undervoltage
correction
Input voltages between 85 and 95V are boosted by 20%
LEDS ALARMS & SWITCHES
LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Alarms Audible alarm indicates power-failure and low-battery conditions
Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
510
UPS AC suppression
response time
Instantaneous
EMI / RFI AC noise
suppression
Yes
ISOLATION
Output isolation
transformer
Professional grade load isolation transformer
Surge voltage withstand
capability
ANSI/IEEE C62.41 Categories A & B 6KV/200/500 amp 100Khz Ringwave and category B BiWave
Surge voltage attenuation N-G 2000:1, L-G 240:1, L-N 100:1
Insertion loss 65 db N-G from 10Khz to 100Khz, 45 to 60 db L-G from 10Khz to 100Khz, 18 to 54 db L-N from 50Khz to 500
Khz
PHYSICAL
Installation form factors
supported with included
accessories
Tower
Installation form factors
supported with optional
accessories
Wallmount (UPSWM - tower mounting kit)
Primary form factor Tower
UPS / Power Module
dimensions in primary
form factor (height x width
x depth / inches)
12.8 x 7.5 x 9.2
UPS / Power Module
dimensions in primary
form factor (height x width
x depth / cm)
32.4 x 19 x 23.5
UPS / Power Module
weight (lbs)
36.4
UPS / Power Module
weight (kg)
16.5
UPS Shipping dimensions
(height x width x depth /
inches)
18.2 x 13.8 x 12
UPS Shipping dimensions
(height x width x depth /
cm)
46.4 x 34.9 x 30.5
Shipping weight (lbs) 40
Shipping weight (kg) 18.2
UPS housing material PVC
Cooling method Fan
ENVIRONMENTAL
Operating Temperature
Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature
Range
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC mode BTU / hr. (full
load)
235.4
Battery mode BTU / hr.
(full load)
324.5
COMMUNICATIONS
Communications interface USB
PowerAlert software Free download from www.tripplite.com
Communications cable USB cable included
WatchDog compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer time 2-4 milliseconds
Low voltage transfer to
battery power (setpoint)
81
High voltage transfer to
battery power (setpoint)
143
SPECIAL FEATURES
Cold Start (startup in
battery mode during a
power failure)
Cold-start operation supported
High availability UPS
features
Hot swappable batteries
CERTIFICATIONS
UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A
(EMI)
WARRANTY
Product Warranty Period
(Worldwide)
2-year limited warranty
Connected Equipment
Insurance (U.S., Canada &
Puerto Rico)
$200,000 Ultimate Lifetime Insurance
Related Items
Optional Products
Product Type Related Model Description Qty.
Extended Warranties WEXT3-OMNI 3-Year Extended Warranty - For OmniSmart, OmniPro, OmniVS 1
Extended Warranties WEXT5-OMNI 5-Year Extended Warranty - For OmniSmart, OmniPro, OmniVS 1
Wallmount Bracket UPSWM Wallmount Bracket and installation accessories (4 washers, 4 screws,
1 Velcro safety strap)
1
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=3196.
Copyright © 2012 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.
Indice
Altri manuali Tripp Lite UPS
Tripp Lite
Tripp Lite SmartOnline SVX Series Manuale utente
Tripp Lite
Tripp Lite SmartOnline Manuale utente
Tripp Lite
Tripp Lite SmartOnline 3-Phase 10kVA Manuale utente
Tripp Lite
Tripp Lite ECO550UPS Manuale utente
Tripp Lite
Tripp Lite SMART2200RM2UN Guida alla configurazione
Tripp Lite
Tripp Lite OMNISMART OMNIVS500 Manuale utente
Tripp Lite
Tripp Lite TE1200 Manuale utente
Tripp Lite
Tripp Lite OMNISMART350HG Manuale utente
Tripp Lite
Tripp Lite OMNIVSINT800 Manuale utente
Tripp Lite
Tripp Lite SMART2500XLHG Manuale utente
Tripp Lite
Tripp Lite SmartPro SMART3000RMXL2U Guida all'installazione
Tripp Lite
Tripp Lite BC Internet Manuale utente
Tripp Lite
Tripp Lite BCPRO1050 Manuale utente
Tripp Lite
Tripp Lite Digital UPS System OMNI1300LCD Manuale utente
Tripp Lite
Tripp Lite SUPDMB6KIEC Manuale utente
Tripp Lite
Tripp Lite SMART1500LCDT Manuale utente
Tripp Lite
Tripp Lite SmartOnline Manuale utente
Tripp Lite
Tripp Lite BCPRO1400 Manuale utente
Tripp Lite
Tripp Lite SmartPro Rackmount SMX1000RT2U Manuale utente
Tripp Lite
Tripp Lite SmartPro SMART500USB Manuale utente
Manuali UPS popolari di altre marche
Pylontech
Pylontech Victron & Pylontech US5000 Manuale utente
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Manuale utente
Mecer
Mecer ME-1000-WTU Manuale utente
Mustek
Mustek PowerMust 530(B) Plus Manuale di installazione e funzionamento
Emerson
Emerson Liebert NXL series Manuale utente
MAKELSAN
MAKELSAN BOXER SERIES Manuale utente
