TrolMaster WD-2 Manuale utente
WD-2
Water Detector
For Hydro-X Control System
Overview
Thank you for purchasing the TrolMaster’s WD-2 Water Detector.
Features
LCD Display, Easy Operation
Addressing Button
Water Leak Alarm
Awater detectoris anelectronicdevicethat is specially designed
to detect the presence of water and provide an alert in time to
allow the prevention ofwater leak in the Hydro-X Control
System.
The default function of Water Detector (WD-2) is for leak
detection and there is a triangle symbol shown in the LCD
display of the Hydro-X Controller. When the WD-2 detects water
leak, it will send an alarm message to your Smartphone one
minute later. You can also check the alarm message in the
Hydro-X
Controller.
Two or more Water Detectors
(up to 8pcs for each system) can
be linked together in a “daisy chain,” expanding the leak detection
monitoring area.
FRONT PANEL Installation
Addressing Button
LCD Screen
Touch Spot Cable
16ft RJ12 Cable
Mount the water detector near the water reservoir or nutrient
tank. Use a screw to mount the Water Detector on the wall or
fix it through the top hole with a string.
Operation Instructions
1. Connection to Hydro-X Controller
2. Address Assignment
Connect the RJ12 cable (left) to the SENSORS terminal
on the bottom panel of the Hydro-X Controller. The touch
spot cable (right) can be used to connect the single touch
spot (accessory of WD-2). You can also use a RJ12
T-splitter to connect one more Water Detector (WD-2)
as shown below.
Water Detectors
Press the Addressing button on the WD-2 unit so that
the Hydro-X Controller will assign an address to the
WD-2 unit accordingly. The LCD screen of the WD-2
Water Detector will show a triangle symbol indicating
that the water
leak detection is the default function.
1
Please press
Addressing
Key
Water detector 1
has been added
Addressing
Screen of WD-2 Addressing Button
Screen of Hydro-X
Screen of WD-2
When the Water Detector (WD-2) is sucessfully
connected to the Hydro-X and the touch spot is
placed into water, the Hydro-X Controller will send
an alarm message to your Smartphone if the water
leak is detected. You can also check the alarm
messages in the Alarm Message page of the Hydro-X.
3.
Designed by TrolMaster in California
Assembled in China
For more information, please visit
www.trolmaster.com
NOTES:
The number inside the triangle symbol refers to the
connection sequence (from 1 to 8) of water detectors.
The first assigned Water Detector (WD-2) will be
marked as number 1, the second one will marked as
number 2, and so on.
It’s suggested to connect one touch spot under one
Water Detector (WD-2).
1.
2.
Altri manuali TrolMaster Sensore di sicurezza
