TROMMELBERG TXB30LS Manuale utente
USER MANUAL TXB30LS, V19.01 page | 1
Technical changes, misprints and errors are reserved
USER MANUAL
Mobile Scissor Lift
TXB30LS
USER MANUAL TXB30LS, V19.01 page | 2
Technical changes, misprints and errors are reserved
The manual is an integral part of the lift, which it should always accompany even if the
unit is sold .The manual, must be kept in the vicinity of the lift in an easily accessible
place so that the operator and maintenance staff must be able to locate and consult the
manual quickly at any time.
ATTENTIVE AND REPEATED READING OF SAFETY INSTRUCTION, WHICH
CONTAINS IMPORTANT INFORMATION AND SAFETY WARNINGS, IS
PARTICULARLY RECOMMENDED.
USER MANUAL TXB30LS, V19.01 page | 3
Technical changes, misprints and errors are reserved
Table of contents
Safety page 4-6
Introduction page 4
Symbols page 4
Intended Use page 4
Safety Instructions for Commissioning page 5
Safety Instructions for Operation page 5
Safety Instructions for Maintenance page 6
1. Purpose and characteristics page 7
2. Specifications page 8
Storage page 9
Opening the packaging page 9
Disposal of the packaging page 9
3. Transportation page 9
4. Unpacking page 10
5. Installation and testing page 11
6. Maintenance page 12
6.1. Maintenance schedule page 12
7. Operation page 13-17
7.1. Defects / Maulfunctions page 13
7.2. Controls page 14
7.2.1. Control Unit page 14-15
7.3. Operation page 16-17
7.3.1. Preparations page 16
7.3.2. Raising page 16
7.3.3. Vehicle in Raise Position page 16
7.3.4. Lowering page 17
7.4. Protection against Unauthorized Usage page 17
8. Troubleshooting page 18
9. Electrical Systems page 19
10.Hydraulic Systems page 20
USER MANUAL TXB30LS, V19.01 page | 4
Technical changes, misprints and errors are reserved
SAFETY
Introduction
Thoroughly read this manual before operating the lift and comply with the instructions.
Always display the manual in a conspicuous location.
Personal injury and property damage incurred due to non-compliance with these safety
instructions are not covered by the product liability regulations.
Symbols
Failure to comply with instructions could result in personal injury.
Failure to comply with instructions could result in property damage.
Important information
Intended Use
The lift is designed for the safe lifting of automotive vehicles. Observe the rated load
capacity and load distribution of the lift.
Load Capacity
Load Distribution Front : Rear
Minimum
Maximum
TXB30LS
3000Kg
3 :2
2 : 3
The lift should always been driven from the predetermined direction.
USER MANUAL TXB30LS, V19.01 page | 5
Technical changes, misprints and errors are reserved
Safety Instructions for commissioning
•The lift may be installed and commissioned by authorized service personnel only.
•The standard lift version may not be installed and commissioned in the vicinity of
explosives or flammable liquids.
•The standard lift version may not be installed and commissioned outdoors or in
moist rooms (e.g. car wash).
Safety Instructions for Operation
•Carefully read the User Manual.
•Lift operation by authorized personnel over 18 years only.
•Always keep the lift and lift area clean and free of tools, parts, debris etc.
•Once the pads contact the lifting points of the vehicle, check if the pads are in the
correct position.
•After raising the vehicle briefly, stop and check the pads for secure contact.
•Always lift the vehicle using all four pads!
•Make sure the vehicle doors are closed during raising and lowering cycles.
•Closely watch the vehicle and the lift during raising and lowering cycles.
•Do not allow anyone to stay in the lift area during raising and lowering cycles.
•Climbing up the raised lift or vehicle is prohibited.
•Only use the lift for its intended purpose.
•Comply with the applicable accident prevention regulations.
•Do not overload the lift. The rated load capacity is indicated on the lift nameplate.
•Only use the vehicle manufacturer´s recommended lifting points!
•After positioning the vehicle, apply the parking brake.
•Use caution when removing or installing heavy components (center-of-gravity
displacement)!
•The main switch also serves as EMERGENCY SWITCH. In case of emergency
turn it to the position “0”.
•Protect all parts of the electrical equipment from humidity and moisture.
•Protect the lift against unauthorized usage by padlocking the main switch.
USER MANUAL TXB30LS, V19.01 page | 6
Technical changes, misprints and errors are reserved
Safety Instructions for Maintenance
•Maintenance or repair work by authorized service personnel only.
•Turn off and padlock the main switch before doing any maintenance, or repair
work.
•Work on pulse generators or proximity switches by authorized service personnel
only.
•Work on the electrical equipment by certified electricians only.
•Ensure that ecologically harmful substances are disposed of, only in accordance
with the appropriate regulations.
•Do not use high pressure / steam jet cleaners or caustic cleaning agents. Risk of
damage!
•Do not replace or override the safety devices.
•The MSDS of the hydraulic oil* shall be obtained and kept at the easily
accessible place for reference in the emergency situation.
*Hydraulic oil is not included in the scope of delivery
* we recommend the use of HLP32 or HLP46 hydraulic oil
ATTENTION, SAFETY FIRST!
•Please check the lift before every operation and make sure that it must not be
used outside.
•Always raise the lift above the first safe mechanical lock, before you start the
work on the raised vehicle.
•Please check the moving parts regularly and lubricate the axles and rails weekly
with suitable lubricants.
•Always work according to the user manual and the safety instructions.
NOTE: This lift is not allowed to be
used outside!
USER MANUAL TXB30LS, V19.01 page | 7
Technical changes, misprints and errors are reserved
1. Purpose and characteristics
The mobile scissor lift TXB30LS is perfectly suited for
•The inspection and maintenance of the braking system
•Changing wheels
•Repair works on the front and rear
The compact design of the lift is particularly space-saving and easy to move.
The scissor lift has not to be fixed to the ground, just position it on the flat floor and start
to work.
USER MANUAL TXB30LS, V19.01 page | 8
Technical changes, misprints and errors are reserved
2. Specifications
TXB30LS
Lifting capacity
3000Kg
Lifting height
960mm
Min. height
115mm
Lifting time
55-60s
Motor power
2.2kW
Power supply
220V; 50Hz/60Hz
Rated oil pressure
16MPa
Net weight
540Kg
Noise level
Less than 70dB
USER MANUAL TXB30LS, V19.01 page | 9
Technical changes, misprints and errors are reserved
Storage
Packed machinery must always be kept in a covered, protected place, at a temperature
between -10°C and +40°C and must not be exposed to direct sunlight.
Opening of the packaging
When the lift arrives, check that the machine has not been damaged during transport and
that all parts are present. The packaging must be opened using all possible
precautionary measure to avoid damaging the machine or its parts. Make sure that parts
do not fall out of the packaging during the opening.
Disposal of the packaging
The wooden parts of the packaging may be reused or recycled according to the local
regulations.
3. Transportation
For the easy transport, the PACKAGES are bolted together with a BELT, and control unit
is packed into a plywood case. It must be moved by suitable forklift truck at the middle of
package.
Moving and positioning can be very dangerous if not performed with the
utmost caution. Check the integrity and suitability of the available means.
All packaging, lifting, handling, transport and unpacking operations are tob
e performed by authorized personnel with knowledge of the lift and the
contents of this manual.
USER MANUAL TXB30LS, V19.01 page | 10
Technical changes, misprints and errors are reserved
4. Unpacking
Check that the equipment is in perfect condition, making sure that no parts damaged or
missed. Use below figure for reference. If in doubt, do not use the machine and contact
your retailer.
Indice
Altri manuali TROMMELBERG Piattaforma elevatrice a forbice
