TROMMELBERG TXB30Y Manuale utente
USER MANUAL TXB30Y, V16.01 page | 1
Technical changes, misprints and errors are reserved
USER MANUAL
Scissor Lift
TXB30Y
USER MANUAL TXB30Y, V16.01 page | 2
Technical changes, misprints and errors are reserved
The manual is an integral part of the lift, which it should always accompany even if the
unit is sold .The manual, must be kept in the vicinity of the lift in an easily accessible
place so that the operator and maintenance staff must be able to locate and consult the
manual quickly at any time.
ATTENTIVE AND REPEATED READING OF SAFETY INSTRUCTION, WHICH
CONTAINS IMPORTANT INFORMATION AND SAFETY WARNINGS, IS
PARTICULARLY RECOMMENDED.
USER MANUAL TXB30Y, V16.01 page | 3
Technical changes, misprints and errors are reserved
Table of contents
Safety page 4-7
Introduction page 4
Symbols page 4
Intended Use page 4
Correct Use page 4
Safety Instructions for Commissioning page 5
Safety Instructions for Operation page 5
Safety Instructions for Maintenance page 6
1. Specifications page 8
Storage page 9
Opening the packaging page 9
2. Transportation page 9
3. Unpacking page 10
4. Installation site, foundation
and required supply connections page 10-11
5. Installation und testing page 11-15
6. Maintenance page 16
6.1. Maintenance schedule page 16
7. Operation page 17-20
7.1. Defects / Maulfunctions page 17
7.2. Controls page 18
7.3. Operation page 19-20
7.3.1. Preparations page 19
7.3.2. Raising page 19
7.3.3. Vehicle in Raised Position page 19
7.3.4. Lowering page 20
7.4. Protection against Unauthorized Usage page 20
8. Troubleshooting pege 21
9. Hydraulic Systems page 22
10.Pneumatic Systems Page 23
11.Electrical Systems page 24-25
12.Exploded view page 26-32
USER MANUAL TXB30Y, V16.01 page | 4
Technical changes, misprints and errors are reserved
Safety
Introduction
Thoroughly read this manual before operating the lift and comply with the instructions.
Always display the manual in a conspicuous location.
Personal injury and property damage incurred due to non-compliance with these safety
instructions are not covered by the product liability regulations.
Symbols
Failure to comply with instructions could result in personal injury.
Failure to comply with instructions could result in property damage.
Risk of electrical shock
Important information
Intended Use
The scissor lift TXB30Y has a lifting capacity of 3000kg and can lift vehicles, which do
not exceed the lifting capacity. The scissor lift is suitable for maintenance and repair
work on vehicles.
Correct Use
- the scissor lift is designed for secure lifting of motor vehicles
- never exceed the lifting capacity of the scissor lift TXB30Y
- the center-of-gravity of the vehicle has to be placed directly in the middle of
the lift
- always pay attention to an equal weight distribution!
- the vehicle has to be driven as centrally as possible on the lifting platforms
USER MANUAL TXB30Y, V16.01 page | 5
Technical changes, misprints and errors are reserved
Safety Instructions for Commissioning
The lift may be installed and commissioned by authorized service personnel,
only.
The standard lift version may not be installed and commissioned in the vicinity of
explosives or flammable liquids.
The standard lift version may not be installed and commissioned outdoors or in
moist rooms (e.g. car wash).
Safety Instructions for Operation
Carefully read the User Manual.
Lift operation by authorized personnel over 18 years, only.
Always keep the lift and lift area clean and free of tools, parts, debris etc.
Once the pads contact the lifting points of the vehicle, check if the pads are in the
correct position.
After raising the vehicle briefly, stop and check the pads for secure contact.
Always lift the vehicle using all four pads!
Make sure the vehicle doors are closed during raising and lowering cycles.
Closely watch the vehicle and the lift during raising and lowering cycles.
Do not allow anyone to stay in the lift area during raising and lowering cycles.
Climbing up the raised lift or vehicle is prohibited.
Only use the lift for its intended purpose.
Comply with the applicable accident prevention regulations.
Do not overload the lift. The rated load capacity is indicated on the lifts nameplate.
Only use the vehicle manufacturer´s recommended lifting points!
After positioning the vehicle, apply the parking brake.
Use caution when removing or installing heavy components (center-of-gravity
displacement)!
The main switch also serves as EMERGENCY SWITCH. In case of emergency
turn it to the position “0”.
Protect all parts of the electrical equipment from humidity and moisture.
Protect the lift against unauthorized usage by padlocking the main switch.
USER MANUAL TXB30Y, V16.01 page | 6
Technical changes, misprints and errors are reserved
Safety Instructions for Maintenance
Maintenance or repair work by authorized service personnel, only.
Turn off and padlock the main switch before doing any maintenance, or repair
work.
Work on pulse generators or proximity switches by authorized service personnel,
only.
Work on the electrical equipment by certified electricians, only.
Ensure that ecologically harmful substances are disposed of, only in accordance
with the appropriate regulations.
Do not use high pressure / steam jet cleaners or caustic cleaning agents. Risk of
damage!
Do not replace or override the safety devices.
The MSDS of the hydraulic oil* shall be obtained and kept at the easily
accessible place for reference in the emergency situation.
*Hydraulic oil is not included in the scope of delivery
* we recommend the use of HLP32 or HLP46 hydraulic oil
The safety instructions help you to prevent injuries or damages. For your safety, the
compliance with this safety instructions is absolutely necessary. The relevant national
and international safety standards for occupational health and safety must be observed.
Each operator is responsible for the compliance with the rules applicable to himself and
has to organize the latest version of the regulations independently.
The installation and commissioning may be performed by authorized service personnel,
only. The installation and commissioning is described in this manual.
USER MANUAL TXB30Y, V16.01 page | 7
Technical changes, misprints and errors are reserved
Never use this scissor lift, without observing the safety instructions.
- always pay attention to free lifting paths
- always make sure that there is nobody in or under the vehicle during the
raising or lowering cycles
- always make sure that there are no parts, tools or limbs in the scissor
mechanism
- always make sure that the vehicle is driven in the predetermined direction to
the lift!
- always pay attention on the correct positioning of the vehicle to be lifted!
- always make sure that there are no persons on the lift or in the vehicle during
the raising or lowering cycles!
- to prevent slipping, keep your working area free from dirt, oils or other
lubricants
Drive direction
USER MANUAL TXB30Y, V16.01 page | 8
Technical changes, misprints and errors are reserved
1. Specifications
TXB30Y
Lifting capacity
3000Kg
Lifting height
1850mm
Min. height
105mm
Lifting time
55-60s
Motor power
2.2kW
Power supply
3/N/PE~380V, 50Hz,10A
Net weight
883Kg
Noise level
< 76 dB
USER MANUAL TXB30Y, V16.01 page | 9
Technical changes, misprints and errors are reserved
Storage
Packed machinery must always be kept in a covered, protected place, at a temperature
between -10°C and +40°C and must not be exposed to direct sunlight.
Opening of the packaging
When the lift arrives, check that the machine has not been damaged during transport and
that all parts are present. The packaging must be opened using all possible
precautionary measure to avoid damaging the machine or its parts. Make sure that parts
do not fall out of the packaging during the opening.
2. Transportation
For the easy transport, the PACKAGES are bolted together with a belt. The PACKAGES
must be separated by any suitable means.
Moving and positioning can be very dangerous, if not performed with the
utmost caution. Check the integrity and suitability of the available means.
All packaging, lifting, handling, transport and unpacking operations are to
be performed by authorized personnel with knowledge of the lift and the
contents of this manual.
USER MANUAL TXB30Y, V16.01 page | 10
Technical changes, misprints and errors are reserved
3. Unpacking
Check that the equipment is in perfect condition, making sure that no parts are damaged
or missing. If in doubt, do not use the machine and contact your retailer.
4. Installation site, foundation and required supply connections
Installation site
The scissor lift TXB30Y must not be installed and commissioned in the vicinity of
explosives or flammable liquids and outdoors or in moist rooms (e.g. car wash).
In rooms with low ceilings the installation of height safety shutdown is recommended.
The operator is responsible for the selection of a suitable installation site.
Indice
Altri manuali TROMMELBERG Piattaforma elevatrice a forbice
