TSC TTP-346M Manuale utente

TTP-2410M/346M/644M

TTP-246M Plus/344M Plus

SERVICE

MANUAL

THERMAL TRANSFER / DIRECT THERMAL

BAR CODE PRINTER

TTP-2410M/346M/644M

TTP-246M Plus/344M Plus

Bar Code Printe

Service Manual

TABLE OF CONTENT

1. FUNDAMENTAL OF THE SYSTEM ..........................................................................1

1.1. Overview.................................................................................................................1

2. ELECTRONICS..........................................................................................................5

2.1 Summary of Board Connectors.............................................................................5

2.2 Interface Pin Configuration..................................................................................10

3. MECHANISM...........................................................................................................13

3.1 Remove Covers and the Lower Front Panel.......................................................13

3.2 Replacing the LCD Panel Module........................................................................15

3.3 Replacing the Power Supply Unit........................................................................16

3.4 Replacing Multi-interface Board..........................................................................17

3.5 Replacing the Main Board....................................................................................18

3.6 Replacing the Platen Roller Assembly................................................................19

3.7 Replacing the Stepping Motor.............................................................................20

3.8 Replacing the Print head ASS'Y ..........................................................................21

3.9 Replacing the Gap/Black Mark Sensor Module..................................................23

3.10 Replacing the Media Damper.............................................................................24

3.11 Replacing the Ribbon Rewind Spindle..............................................................25

3.12 Cutter Module Installation (Option)...................................................................26

3.13 Peel-off Kit Installation (Option)........................................................................27

3.14 Internal Rewinding Kit Installation (Option) .....................................................31

4. TROUBLESHOOTING.............................................................................................35

4.1 Common Problems...............................................................................................35

4.2 Mechanism Fine Adjustment to Avoid Ribbon Wrinkles...................................40

5. MAINTENANCE.......................................................................................................42

UPDATE HISTORY......................................................................................................44

TTP-2410M/346M/644M

TTP-246M Plus/344M Plus

Bar Code Printe

Service Manual

1. FUNDAMENTAL OF THE SYSTEM

1.1. Overview

Front View

1. LED indicators

2. LCD display

3. Front panel buttons

4. Paper exit chute

5. Lower front cover

6. Printer right side cover

4 6

TTP-2410M/346M/644M

TTP-246M Plus/344M Plus

Bar Code Printe

Service Manual

Interior View

1. Ribbon rewind spindle

2. Ribbon release button

3. Ribbon guide plate

4. Print head

5. Platen roller

6. Print head release lever

7. Media guide bar

8. Label roll guard

9. Label supply spindle

10. Ribbon supply spindle

11. Damper

12. Label guide

13. Z axis mechanism adjustment knob

14. Print head pressure adjustment knob

15. Print head secure screw

16. Ribbon sensor

17. Media sensor

TTP-2410M/346M/644M

TTP-246M Plus/344M Plus

Bar Code Printe

Service Manual

Rear View

1. Fan-fold paper entrance chute

2. Centronics interface

3. USB interface

4. RS-232C interface

5. Power jack socket

6. GPIO interface

7. SD card slot

8. Ethernet interface

9. PS/2 interface

10. Power switch

Note:

1. SD card slot, Ethernet interface and PS/2 interface are standard interfaces for

TTP-2410M/TTP-346M models, but optional for TTP-246M Plus/TTP-344M Plus models.

2. GPIO interface card includes SD card slot, Ethernet and PS/2 interfaces. So GPIO interface is

an factory option for TTP-2410M/TTP-346M, but a dealer option for TTP-246M Plus/TTP-344M

Plus models.

TTP-2410M/346M/644M

TTP-246M Plus/344M Plus

Bar Code Printe

Service Manual

3. Recommended SD card specification.

SD card spec SD card capacity Approved SD card manufacturer

V1.0, V1.1 128 MB SanDisk, Transcend

V1.0, V1.1 256 MB SanDisk, Transcend, Panasonic

V1.0, V1.1 512 MB SanDisk, Transcend, Panasonic

V1.0, V1.1 1 GB SanDisk, Transcend, Panasonic

V2.0 SDHC CLASS 4 4 GB

V2.0 SDHC CLASS 6 4 GB SanDisk, Transcend, Panasonic

V1.0, V1.1 microSD 128 MB Transcend, Panasonic

V1.0, V1.1 microSD 256 MB Transcend, Panasonic

V1.0, V1.1 microSD 512 MB Panasonic

V1.0, V1.1 microSD 1 GB Transcend, Panasonic

V2.0 SDHC CLASS 4 microSD 4 GB Panasonic

V2.0 SDHC CLASS 6 microSD 4 GB Transcend

V1.0, V1.1 miniSD 128 MB Transcend, Panasonic

V1.0, V1.1 miniSD 256 MB Transcend, Panasonic

V1.0, V1.1 miniSD 512 MB Transcend, Panasonic

V1.0, V1.1 miniSD 1 GB Transcend, Panasonic

V2.0 SDHC CLASS 4 miniSD 4 GB Transcend

V2.0 SDHC CLASS 6 miniSD 4 GB

- The DOS FAT file system is supported for the SD card.

- Folders/files stored in the SD card should be in the 8.3 filename format

- The miniSD/microSD card to SD card slot adapter is required.

TTP-2410M/346M/644M

TTP-246M Plus/344M Plus

Bar Code Printe

Service Manual

2. ELECTRONICS

2.1 Summary of Board Connectors

Main board

Connector Description

1 Centronics port connector

2 USB connector

3 RS-232C connector

4 LCD panel connector

5 Multi-interface board connector/ GPIO interface board

6 Micro processor

5 6

11 12 16

TTP-2410M/346M/644M

TTP-246M Plus/344M Plus

Bar Code Printe

Service Manual

7 RFID module connector

Head open sensor connector

Pin Description Voltage

1 Head open sensor emitter

power pin 1.2~1.4V

2 GND 0V

3 Head open sensor receiver 0V: Head close

3.3V: Head open

4 GND 0V

Gap sensor connector

Pin Description Voltage

1 GND 0V

2 Gap and black mark

sensor receiver A/D: 0~3.3V

3 Black mark sensor emitter 4.0~4.1V: Emitter on

4.3~4.4V: Emitter off

4 Gap sensor emitter 4.0~4.1V: Emitter on

4.3~4.4V: Emitter off

5 Power 5V

Ribbon sensor connector

Pin Description Voltage

1 Ribbon sensor emitter 4.0~4.1V: Emitter on

4.3~4.4V: Emitter off

2 GND 0V

3 Ribbon sensor emitter

power pin 5V

4 Ribbon sensor receiver A/D: 0~3.3V

Ribbon encoder sensor connector

Pin Description Voltage

1 Ribbon encoder sensor

emitter power pin 4.0~4.15V

2 Ribbon encoder sensor

receiver A/D: 0~3.3V

3 GND 0V

TTP-2410M/346M/644M

TTP-246M Plus/344M Plus

Bar Code Printe

Service Manual

Cutter/peel-off sensor connector

Pin Description Voltage

1 Cutter enable 0V: Cutter work

5V: Cutter stop

2 Cutter direction 0V: Cutter positive cut

5V: Cutter negative cut

3 Cutter position sensor

switch 0V: Cutter stop

3.3V: Cutter work

4 Peel sensor receiver A/D: 0~3.3V

5 Peel sensor emitter 4.0~4.1V: Emitter on

4.3~4.4V: Emitter off

6 Logic power 5V

7 GND 0V

8 Cutter power 24V

13 Power supply output (24V DC) connector

14 GPIO interface power (24V DC) connector

15 Print head connector

16 Stepping motor connector

TTP-2410M/346M/644M

TTP-246M Plus/344M Plus

Bar Code Printe

Service Manual

Multi-interface board

Connector Description Remark

1 Main board connector

2 SD card slot

3 Ethernet RJ-45 connector

4 PS/2 connector

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali TSC Lettore di codici a barre

TSC

TSC TTP-342M Plus Manuale utente

TSC

TSC TTP-245C series Manuale utente

TSC

TSC TTP-2610MT Series Manuale utente

TSC

TSC TTP-243 Series Manuale utente

TSC

TSC Alpha-4L Series Manuale utente

TSC

TSC PRINTRONIX TX210 Series Manuale utente

TSC

TSC TTP-244 Pro Series Manuale utente

TSC

TSC PEX-2000 Series Manuale utente

TSC

TSC TDP-225 Manuale utente

TSC

TSC TTP 243 Pro Manuale utente

TSC

TSC ME240 series Manuale utente

TSC

TSC TTP-268M Manuale utente

TSC

TSC TTP-2410MU Series Manuale utente

TSC

TSC TTP-2410M Manuale utente

TSC

TSC TTP-286MT Series Manuale utente

TSC

TSC TTP-245HR Manuale utente

TSC

TSC DA200 Series Manuale utente

TSC

TSC TTP-243 Pro Series Manuale utente

TSC

TSC XP-DT425B Series Manuale utente

TSC

TSC TA200 Series Manuale utente

TSC

TSC TDM-20 Manuale utente

TSC

TSC TTP-243 Pro Series Manuale utente

TSC

TSC TDP-247 Manuale utente

TSC

TSC MH240 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente