TUTK CLJ 100L Manuale utente
1
2
Index
1. Read Before Use. ................................................................................................... 3
2. Quick Installation Guide ..................................................................................... 5
3. Set up the Camera ................................................................................................ 6
4. Connect to the network ...................................................................................... 7
5. Software ................................................................................................................... 9
5.1 IPCAM system ........................................................................................... 9
5.1.1 How to install ................................................................................ 9
5.1.2 How to use IPCAM SYSTEM .................................................... 11
5.1.3 Take Picture .................................................................................. 13
5.1.4 Detect ............................................................................................ 13
5.1.5 Playback ........................................................................................ 14
5.1.6 System setting ............................................................................ 17
5.2 Search Tool V3 ......................................................................................... 25
5.2.1 How to use Search Tool V3 ..................................................... 25
5.2.2 Connect the Cam and computer........................................... 28
5.3 3G Mobile Viewer ................................................................................... 30
6. Specification ......................................................................................................... 33
7. Introduce the PLC and P2P .............................................................................. 34
8. Trouble shooting ................................................................................................. 35
3
(
G
)
Software CD…………
.
………
.
……
..
……x
1
(
A
)
CLJ
100
L Lamp Type IP Cam………x
1
(B)Base……………………………….……………x
1
(
C
)
Cable Line…… …………
.
……
..
…………x
1
(
D
)
PLC
200
Adaptor
.
………………
...
……
..
x
1
(
E
)
Power cord……
..
………
..
…………
..
……x
1
(
F
)
User
'
s Manual
..
…………
.
…………
..
……x
1
Package
Content
1. Read Before Use.
Thank you
Thank you for purchasing this product. We strongly suggest you read this
manual carefully before you set up the product. Some software image
may be different from your real setting process, please follow the software
instruction which show on your pc device. If you need further product
information, you can get on our official website or contact our service
people by e-mail.
Confirm
Please make sure that there are 7 items in your box.
4
Attention
Surge Protection Device Issue
We suggest that connect the PLC adaptor and IP Cam into home
power outlet directly. If you need to use the extension cord please
avoid using the cord with surge protection device (SPD). Some SPD
may cause the disconnection of signal.
Three-phase power system
Generally speaking, the three-phase power system is used by the
industry environment. It is rare for home use. But if you are using the
product at the three-phase power system environment. Please make
sure that the PLC adaptor and the IP Cam must be connected at the
same power phase, otherwise it may cause the disconnection of
signal.
Voltage Issue
our products support AC 100V~240V. But all devices must be
connected at the same voltage environment; otherwise it may cause
the disconnection of signal. For example: if PLC plug into the outlet of
110V but the IP cam plug into the outlet of 220V, then there will be
no signal connection due to the different voltage.
Quantity Issue
One PLC adaptor does not support more than 16 IP cameras. It does
not allow setting up two PLC adaptors in one network in case the
mistake of network connection.
Distance/Power meter/Power-off Protection
All devices must be under the same power meter, or it may cause the
disconnection of signal. The entire device has the connection
distance limited of 300M. However, the Power-off Protection does
not affect any signal communication as result there is no worry issue
of Power-off Protection.
Liability
Every care has been taken in the preparation of this manual. Please inform
your local TUTK office of any inaccuracies or omissions. Throughtek (TUTK)
cannot be held responsible for any technical or typographical errors and
reserves the right to make changes to the product and manuals without
prior notice. Throughtek (TUTK) makes no warranty of any kind with
regard to the material contained within this document, including, but not
limited to, the implied warranties of merchantability and fitness for a
particular purpose. Throughtek (TUTK) shall not be liable nor responsible
for incidental or consequential damages in connection with the furnishing,
performance or use of this material.
5
2. Quick Installation Guide
Step 1: Screw the product into the lamp socket or
the attached base.
Step 2 : Plug in the power source.(AC 100V~240V)
Step 3 : PLC plug in the power source, connect PLC
to your broadband router via cable line
Step 4: Install the software.(Refer ch.5)
Step 5: Wait for the auto search and get video
image from your IP camera.
6
3. Set up the Camera
1To plug the camera into E27socket. The lens angle can be adjusted.
2Also you can use the base to connect the camera.
3The base can be opened from the side hole and fixed on the roof.
4 Plug in the PLC to power socket. Make a connection to broadband
router with RJ45 cable line.
7
4. Connect to the network
We need broadband router or wireless AP with DHCP
function to connect the network.
There are 3 connection modes to set up the network.
1 You want to get the video from the remote side via internet, please
connect your PLC to the broadband router or wireless AP and get on
internet with ADSL modern.
2 You want to have the video under the LAN, just connect the PLC to the
broadband router /wireless AP without link to the internet.
There is no more setting require after you finish the
connection of 1 or 2. Then please install the software
IP CAM SYSTEM, it will scan and get the camera
image to your receiver device (PC/NB) automatically.
8
3 Simply make the connection between the Camera and computer.
We suggest you skip this part if you do not adapt this way.
If you need to set up your network by this mode, please refer Ch.5.2.2.
4 This connection mode is unworkable. (There is no broadband
router/wireless AP under the network)
9
5. Software
5.1 IPCAM system
5.1.1 How to install
Insert the software CD to your CD-R device and double click the IPCAM
system.exe to start the install.
1 You will have the below page: please click “Next”.
Selected “English”
2 Change the destination location, please clicks”Next “if you do not
want to change..
10
3 Click “Install”
4 Please wait for the installation process.
5 Install completed, please click” Finish “to start the software.
Indice
