TVS LP 46 NEO Manuale utente
Rev : A, Product Description : User Manual LP 46 Neo
U
US
SE
ER
R’
’S
S
M
MA
AN
NU
UA
AL
L
Barcode Printer
LP 46 NEO
LP 46 Neo User’s Manual
Safety Instructions
Before installing and using the printer, please read the following
items carefully.
1．
．．
．Safety warning
The print head is a thermal element and it is at a high
temperature during printing or just after operation, therefore do
not touch it or its peripherals for safety’s sake.
The print head is an ESD-sensitive device. To prevent damage,
do not touch either its printing parts or connecting parts.
2．
．．
．Notices
1) Install the printer on a flat and stable surface;
2) Reserve adequate space around the printer so that convenient
operation and maintenance can be performed;
3) Keep the printer far away from water source, and do not expose
the printer to direct sunlight, strong light and heat;
4) Do not use or store the printer in a place exposed to high
temperature, high humidity or serious pollution;
5) Do not place the printer in a place exposed to vibration or
impact;
6) No condensation is allowed to the printer. In case of such
condensation, do not turn on the power until it has completely
gone away;
7) Connect the printer power to an appropriate grounding outlet.
Avoid sharing one electrical outlet with large power motors or
other devices that may cause the fluctuation of voltage;
LP 46 Neo User’s Manual
8) Disconnect the power when the printer is deemed to idle for a
long time;
9) Don’t spill water or other electric materials into the printer (e.g.
metal). In case this happens, turn off the power immediately;
10) Do not allow the printer to start printing when there is no
recording paper installed; otherwise the print head and platen
roller will be damaged;
11) To ensure quality print and normal lifetime, use recommended
paper or its equivalent;
12) Shut down the printer when connecting or disconnecting
interfaces to avoid damages to control board;
13) Set the print darkness to a lower grade as long as the print
quality is acceptable. This will help to keep the print head
durable;
14) Avoid turning on and off the printer frequently. It is advised to
turn on the printer at least 2 seconds after the printer is turned
off;
15) Do not disassemble the printer without permission of a
technician, even for repairing purpose;
16) Keep this manual safe and at hand for reference purpose.
LP 46 Neo User’s Manual
Contents
1
11
1
PRODUCT DESCRIPTION
PRODUCT DESCRIPTIONPRODUCT DESCRIPTION
PRODUCT DESCRIPTION
................................
................................................................
....................................................
........................................
....................-
--
-
1
1 1
1 -
--
-
1.1 INTRODUCTION ........................................................................ - 1 -
1.2 UNPACKING AND CHECKING ..................................................... - 2 -
1.3 APPEARANCE AND MODULE ..................................................... - 3 -
1.4 INTRODUCTION OF MAIN MODULES ........................................... - 4 -
2 PRINTER INSTALLATI
2 PRINTER INSTALLATI2 PRINTER INSTALLATI
2 PRINTER INSTALLATION
ONON
ON
................................
................................................................
.....................................................
..........................................
.....................-
--
-
5
5 5
5 -
--
-
2.1 INSTALLATION POSITION .......................................................... - 5 -
2.2 PAPER ROLL INSTALLATION ...................................................... - 5 -
2.3 RIBBON INSTALLATION ............................................................. - 7 -
2.4 POWER ADAPTER CONNECTION ............................................. - 10 -
2.5 COMMUNICATION CABLE CONNECTION ................................... - 10 -
2.6 START THE PRINTER .............................................................. - 11 -
2.6.1 Power-on and self-test ................................................ - 11 -
2.6.2 Mark calibration ........................................................... - 11 -
2.6.3 Printing self-test page ................................................. - 12 -
2.7 DRIVER SETUP ...................................................................... - 13 -
3 PRINTER OPERATIONS
3 PRINTER OPERATIONS3 PRINTER OPERATIONS
3 PRINTER OPERATIONS................................
................................................................
.....................................................
..........................................
.....................
-
--
-
16
16 16
16 -
--
-
3.1 LED, BUTTON AND BUZZER EXPLANATION .............................. - 16 -
3.1.1 LED functions .............................................................. - 16 -
3.1.2 Button functions .......................................................... - 16 -
LP 46 Neo User’s Manual
3.1.3 Buzzer functions ......................................................... - 17 -
3.2 PRINTER STATUS AND OPERATION ......................................... - 18 -
3.2.1 Printer status ............................................................... - 18 -
3.2.2 Daily operations .......................................................... - 18 -
3.3 SENSOR POSITION ADJUSTMENT ............................................ - 19 -
3.4 PRINT POSITION ADJUSTMENT ................................................ - 20 -
4 ROUTINE MAINTENANC
4 ROUTINE MAINTENANC4 ROUTINE MAINTENANC
4 ROUTINE MAINTENANCE
EE
E
................................
................................................................
..................................................
....................................
..................
-
--
-
23
23 23
23 -
--
-
4.1 CLEANING PRINT HEAD .......................................................... - 23 -
4.2 CLEANING PLATEN ROLLER .................................................... - 24 -
5 TROUBLESHOOTING
5 TROUBLESHOOTING5 TROUBLESHOOTING
5 TROUBLESHOOTING
................................
................................................................
........................................................
................................................
........................
-
--
-
25
25 25
25 -
--
-
5.1 TROUBLESHOOTING .............................................................. - 25 -
5.2 PRINT QUALITY PROBLEMS..................................................... - 27 -
APPENDIX
APPENDIXAPPENDIX
APPENDIX
................................
................................................................
................................................................
................................................................
............................................
........................
............
-
--
-
28
28 28
28 -
--
-
APPENDIX 1 TECHNICAL SPECIFICATION ....................................... - 28 -
Appendix 1.1 Main technical specifications ......................... - 28 -
Appendix 1.2 Technical specifications of paper .................. - 31 -
APPENDIX 2 SELF-TEST PAGE ...................................................... - 33 -
APPENDIX 3 PRINT AND PAPER OUT POSITION .............................. - 35 -
APPENDIX 4 COMMUNICATION INTERFACE .................................... - 36 -
Appendix 4.1 Serial interface ............................................... - 36 -
Appendix 4.2 USB interface ................................................. - 37 -
LP 46 Neo User’s Manual
- 1 -
1 Product description
1.1 Introduction
BTP-U100t label printer is an ideal label and barcode printing device
for office use, with delicate appearance and excellent performance.
It can apply to many fields, such as medical treatment, retailing,
manufacture, logistics, asset management and so on.
BTP-U100t label printer can be connected to the peripherals via
serial interface or USB interfaces and can provide universal drivers
under the operating systems such as Windows 2000/Windows
XP/Windows server 2003/ Windows Vista/ Windows server 2008/
Windows 7/ Windows 8.
Main features:
Thermal/thermal transfer printing;
Low noise, high speed printing;
Modular and open ribbon module, easy paper loading operation
and maintenance;
With 32 bit high speed microprocessor;
Adopt heat history and auto temperature adaptation control;
Adopt a new type of print head with long lifetime and high
printing quality;
Support continuous paper, label paper, marked paper, etc;
Mobile sensor with reflective and transmission sensor together,
adaptive for several kinds of paper.
LP 46 Neo User’s Manual
- 2 -
1.2 Unpacking and checking
Unpacking the printer carton and refer to the packing list to check
whether the parts are missing or damaged. If there is, please
contact with SNBC or your local distributor (communication cables
are optional depending on the printer interface type).
Figure 1.2.1
LP 46 Neo User’s Manual
- 3 -
1.3 Appearance and module
1—LOGO plate 2—Top cover
3—Front baffle plate 4—Bottom cover
5—LED 6—Button
7—Paper guide plate 8—Paper roll holder
9—Ribbon thumb wheel 10—Ribbon holder
11—Paper cabinet 12—Ribbon end cap
13—Open spanner
14—Print head 15—Paper guide block
16—Sensor holder 17—Platen roller
18—Buffer shaft 19—Serial interface (optional)
20—USB interface 21—Power interface
22—Power switch
LP 46 Neo User’s Manual
- 4 -
1.4 Introduction of main modules
1) Button (6) and LED (5): indicate the printer status and complete
printing function;
2) Paper roll supporting pole (8) and paper guide plate (7): support
the paper roll to avoid left and right shaking of paper roll;
3) Paper guide block (15): avoid left or right shaking of paper in
the paper out path;
4) Power switch (22): press “O” to power off and press “－” to
power on.
5) Sensor is installed inside the sensor holder (16) to realize the
paper calibration, detection and positioning.
LP 46 Neo User’s Manual
- 5 -
2 Printer installation
2.1 Installation position
Flatly place the printer on the operation table, which must be
waterproof, moisture proof and dustproof. The maximal tilted angle
should not exceed ±15°during installation.
2.2 Paper roll installation
1) Hold the cover open lever with both hands to turn the top cover
upwards, and open the top cover of printer (see figure 2.2.1);
(see figure 2.2.1);
Figure 2.2.1 Figure 2.2.2 Figure 2.2.3
2) Press the cover open lever in the direction of arrow (see figure
2.2.2). After the ribbon holder is uplifted, turn it upwards to the
angle as shown in the figure (see figure 2.2.3);
3) Install the paper roll onto the paper roll holder, and add one
paper guide on each side of the paper roll (see figure 2.2.4);
Indice
Manuali Lettore di codici a barre popolari di altre marche
POSMicro
POSMicro Datalogic PowerScan D7100 Manuale utente
Marson
Marson MT780 Guida rapida alla configurazione
NCR
NCR RealPOS Manuale utente
Motorola
Motorola SE3300 Guida rapida alla configurazione
Element
Element P130BT Manuale utente
Motorola
Motorola Symbol LS3008 Manuale di installazione e funzionamento
