U-Line H-670 Manuale utente

PAGE 1 OF 4 0114 IH-670

INDUSTRIAL PLATFORM

SCALE

1-800-295-5510

uline.com

πH-670, H-747

H-794, H-4593

1. Remove scale parts from packaging.

2. Lift the Scale Pan off the Platform Base.

3. Remove the four styrofoam blocks from the Platform

Base. (See Figure 1)

4. Replace the Scale Pan.

Figure 1

Allen Wrench Power Cord Support Bracket Tower Platform Base Display Indicator

PARTS

ASSEMBLY INSTRUCTIONS

PAGE 2 OF 4 0114 IH-670

ASSEMBLY INSTRUCTIONS CONTINUED

5. Place the Scale on the stable, level surface on which

it is intended to be used.

6. Using the bubble level on the Base Bracket as a

guide, adjust the four leveling feet until scale is level.

(See Figure 2)

7. Feed the data cable from the Base Bracket through

the Tower. (See Figure 3)

8. Tighten the Base Bracket using the included Allen

Wrench. (See Figure 4)

9. Feed the data cable through the Support Bracket by

unscrewing the knob and pulling the Support Bracket

pieces apart. (See Figure 5)

10. Once data cable is threaded through Support

Bracket as shown, tighten the knob and place the

Support Bracket on the Tower. (See Figure 5)

11. Tighten the bolt at the base of the Support Bracket.

(See Figure 5)

12. Slide the Display Indicator onto the Support Bracket.

Adjust the angle of the display by loosening the

knob on the Support Bracket. Tighten the knob when

finished adjusting the angle. (See Figure 6)

13. Plug the data cable and the Power Cord into the

Display Indicator. (See Figure 7)

Figure 2

Figure 4

Figure 5

Figure 3

Figure 6

Figure 7

PAGE 3 OF 4 0114 IH-670

STABLE M+ Pcs

Pcs Kg

0CE

STABLE PT M+

M+

Pcs

UNITS

Pcs

charging

H-670

H-747 & H-7914

QUICK USER’S GUIDE

COUNTING FUNCTION

•Prior to use, connect the AC

adapter and monitor cable.

•This scale has fixed samples

of 10, 20, 50, and 100 pieces.

•The larger sample sizes will

provide you with a more

accurate unit weight.

1. Prior to placing any object

onto the scale, press the CE

key (1). (See Figure 8)

2. Select the fixed sample key of

10, 20, 50, 100 pieces (2).

(See Figure 8)

3. Place the requested number

of samples onto the scale.

4. Press the count key (4).

(See Figure 8)

5. Remove all parts from the

scale.

6. Place the desired number of

pieces onto the scale. This will

provide an accurate count

reading.

7. Remove all parts from the

scale.

8. For the H-670 and H-4593:

Press the UNITS key (8) to

return to the weight display

screen. (See Figure 8)

9. For the H-747 and H-794:

Press the KG key (8) to return

to the weight display screen.

(See Figure 8)

Figure 8

H-670 & H-4593

H-747 & H-794

PAGE 4 OF 4 0114 IH-670

CALIBRATION INSTRUCTIONS

NOTE: Scale can only be accurately calibrated using standard calibrated scale weights. Using

non-calibrated weights may result in inaccurate scale calibration. Nothing should be on the scale and

scale should be level.

ACTIVATE WEIGHT CALIBRATION MODE

•Turn on the scale. As scale counts down to zero, press and hold the Zero key until 02001 appears in the

display.

•Release Zero key. F0 appears in display.

•Switch the mini jumper SWA1 to “ADJ” position. Adjust is down; Lock is up. The switch is located under a

panel on the right side of the keypad housing.

•Press Enter key. Display shows ZEro.

•Press Enter key. Display shows 0---,-Ckg.

•Press UNITS or Kg key to set scale to lb or kg as needed.

•Use the Up and Enter keys to preset the weight being used to calibrate the scale. The Up key sets the

number and the Enter key moves right one digit. Example: to set a weight of 3.0 kg you would press the

Enter key three times to move right three spaces and the Up key three times to enter the number 3.

•Place your calibrated weight on the scale. Display shows WAIt.

•Scale displays weight and beeps.

•Scale is calibrated, it will now return to weighing mode automatically.

•Switch the mini jumper SWA1 back to “LOCK.”

UNITS

πCHICAGO•ATLANTA•DALLAS•LOSANGELES•MINNEAPOLIS•NYC/PHILA•SEATTLE•MEXICO•CANADA

1-800-295-5510

uline.com

Altri manuali per H-670

Questo manuale è adatto per i seguenti modelli

Altri manuali U-Line Scala

U-Line

U-Line OHAUS DEFENDER 5000 Manuale utente

U-Line

U-Line H-4602 Manuale utente

U-Line

U-Line H-3478 Manuale utente

U-Line

U-Line H-5836 Manuale utente

U-Line

U-Line H-2382 Manuale utente

U-Line

U-Line H-2714 Manuale utente

U-Line

U-Line H-1121 Manuale utente

U-Line

U-Line OHAUS CS H-2715 Manuale utente

U-Line

U-Line H-103 Manuale utente

U-Line

U-Line OHAUS DEFENDER 3000 Manuale utente

U-Line

U-Line H-9884 Manuale utente

U-Line

U-Line H-1096 Manuale utente

U-Line

U-Line H-1114 Manuale utente

U-Line

U-Line H-479 Manuale utente

U-Line

U-Line H-5819 Manuale utente

U-Line

U-Line H-1679-MNBRD Manuale utente

U-Line

U-Line SCOUT PRO H-2709 Manuale utente

U-Line

U-Line ADVENTURER PRO Series Manuale utente

U-Line

U-Line OHAUS ADVENTURER H-5276 Manuale utente

U-Line

U-Line CS Series Manuale utente

U-Line

U-Line H-1671 Manuale utente

U-Line

U-Line OHAUS VALOR 3000 Manuale utente

U-Line

U-Line H-5819 Manuale utente

U-Line

U-Line H-1121 Manuale utente

Manuali Scala popolari di altre marche

AWS

AWS ZEO-50 Manuale utente

Gima

Gima Glass Body Fat Analyzer Manuale elenco delle parti

Seca

Seca 374 Manuale utente

TEC

TEC TEC SL59 SERIES Manuale utente

Axis

Axis B/E Series Manuale utente

Alecto

Alecto ACW-40 Manuale utente

Rice Lake

Rice Lake MSI-4260 IS Manuale utente

IKA

IKA RCT basic safety control Manuale utente

ADE

ADE M20011 Manuale utente

Duronic

Duronic KS3000 Manuale utente

Digi

Digi SM-720 Manuale utente

Cardinal

Cardinal CS Series Manuale utente

Korona

Korona Kastella Manuale utente

A&D

A&D FC-50Ki Manuale utente

BDA

BDA CAMARGUE Manuale utente

Tanita

Tanita HD-357 Manuale utente

Leifheit

Leifheit 03173 Manuale utente

Lumme

Lumme LU-1340 Manuale utente