U.S. Products COBRA-H Manuale utente

COBRA®-H

EXTRACTOR

120V

INFORMATION

OPERATING

INSTRUCTIONS

02/10revised10/10FORMNO.56041894

CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ

ALL SECTIONS OF THIS INSTRUCTION MANUAL

IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY

1. Always use a defoamer when foaming occurs to prevent vacuum motor damage.

2. Keep machine from rain and snow, extremes in temperatures, and store in a heated

location. Use the machine indoors. Do not use outdoors.

3. Never allow the spray to remain fixed in one spot.

4. Use approved chemicals only. NO SOLVENTS.

5. Wear gloves or use rags when removing quick disconnects to prevent burns.

6. Never use water above 130º F/54º C in the solution tank.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

2 - FORM NO. 56041894

IMPORTANT SAFETY INSTRUCTIONS

This machine is only suitable for commercial use, for example in hotels, schools, hospitals, factories, shops

and offices other than normal residential housekeeping purposes.

When using any electrical appliance, basic precautions should always be followed, including the following:

NOTE: Read all instructions before using this machine.

WARNING!

To reduce the risk of fire, electric shock, or injury:

•Do not leave the machine unattended when it is plugged in. Unplug the unit from the outlet when not

in use and before servicing.

•To avoid electric shock, do not expose to rain or snow. Store, and use, indoors.

•Do not allow to be used as a toy. Close attention is necessary when used near children.

•Use only as described in this manual. Use only the manufacturer’s recommended attachments.

•Never add water over 130º F/54º C to the solution tank.

•Do not use with damaged cord or plug. If the machine is not working as it should, has been dropped,

damaged, left outdoors or dropped into water, return it to a service center.

•Do not pull by the cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp

edges or corners. Do not run the machine over the cord. Keep the cord away from heated surfaces. To

unplug, grasp the plug, not the cord.

•Do not handle the plug, the cord, or the machine with wet hands.

•Extension cords must be 12/3 and no longer than 50 feet. Replace the cord or plug immediately if the

ground prong becomes damaged.

•Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair,

and anything that may reduce air flow.

•Keep loose clothing, hair, fingers, and all parts of body away from openings and moving parts.

•Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes, or any

health endangering dusts. Do not use to pick up flammable or combustible liquids such as gasoline or

use in areas where they may be present.

•Turn off all controls before unplugging.

•Use extra care when cleaning on stairs.

•Connect to a properly grounded outlet only.

•Liquid ejected at the spray nozzle could be dangerous as a result of its temperature, pressure, or

chemical content.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

FORM NO. 56041894 - 3

Serial Number: __________________ Model: COBRA-H

Purchase Date:_________________

Write the name and phone number of your distributor:

_____________________________________

RECORDAND KEEP THE FOLLOWING INFORMATION

And don’t forget to register your puchase to activate your warranty

INSPECTION:

Carefully unpack and inspect your COBRA-H for shipping damage. Each machine is tested and inspected

before shipping. Any shipping damage incurred is the responsibility of the carrier. You should notify the

carrier immediately if you notice damage to the box or to the machine or parts.

CLEANING SOLUTIONS:

We recommend liquid cleaning chemicals. Powder chemicals may be used, but unless mixed very

thoroughly they could cause a build-up in the pump, lines, and/or quick disconnects. Any problem

caused by a chemical build-up is not covered by warranty. Use a neutral cleaner with a pH between 5

and 10 to avoid premature wear of the pump, seals, and/or other components. Damage caused by the

use of strong chemicals is not covered by the warranty.

MAINTENANCE:

For optimum performance flush the machine with clear water at the end of each working day. Once a

month, minimum, run a flushing compound through the machine to break up any mineral or chemical

build-up that may have formed. Lubricate the wheels, castors, and quick disconnects with an all

purpose silicone spray. The vacuum and the pump do not require any maintenance; however the

vacuum motors may require new brushes after 1000 - 1500 hours. Clean the body with an all purpose

detergent, and protect it with a common auto interior protectant.

PARTS AND SERVICE:

Repairs, when required, should be performed by your authorized distributor who maintains an inventory

of original replacement parts and accessories. Call the distributor from whom you purchased this

machine if you need parts or service. Be sure to specify the machine model. Have your serial number

handy.

DANGER: DO NOT USE SOLVENTS OR ANY CHEMICALS THAT

MAY BE FLAMMABLE, EXPLOSIVE, OR COMBUSTIBLE

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

4 - FORM NO. 56041894

SOLUTION HOSE

CONNECTION

VACUUM (1), VACUUM (2), AND PUMP (3) SWITCHES:

These switches are all powered by cord #1. Switches are on when illuminated.

BYPASS SWITCH (4):

Turning on this switch (switch illuminates when on) bypasses the circuit locator system. See the next

page for explanation of the bypass system.

GREEN INDICATOR LIGHT (5):

When this light is illuminated, it confirms that the machine is on two separate circuits.

1234

VAC 1 VAC 2 PUMP BYPASS

CIRCUIT

LOCATOR 5

SWITCH PLATE:

YOUR MACHINE:

LID, HOLDING TANK SWITCH PLATE

LID, RECOVERY TANK

VAC INTAKE

LATCH (2)

DRAIN VALVE

CASTOR

VENT

WHEEL

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

FORM NO. 56041894 - 5

SET-UP:

Filltheholdingtankwithclearwaterandthedetergentofyourchoice. Mixwell. Althoughthismachineisdesignedtosupplyinstanthotwater,

theadditionofwarmorhotwatertotheholdingtankwouldbeaplusfactor.

1. Plugincord#1. Thiscordrunsthepumpandvacuums.

2. Turnonthepumpandspraythroughthecleaningtoolforafewsecondstofillthelineswithsolution.

3. Plugin cord#2 (identifiedby ared “H”). IFTHEGREENLIGHTILLUMINATES,THE HEATEXCHANGER WILLTURNON

AUTOMATICALLY(SEENOTEBELOW). Wait2minutesfortheheatexchangertoreachoperatingtemperature. Youmaynowbegin

cleaning. Itwilltakeabout10secondsfortheinitialheattoreachthewand.

NOTE: Ifthegreencircuitindicatorlightdoesnotilluminatewhencord#2ispluggedin,thenbothcoresareonthesamecircuit. Tryother

outletsuntilthelightcomeson. Seebypassswitchsection(below)ifyouareunabletogetagreenlight.

ELECTRIC CIRCUIT LOCATOR:

Thisunique,patented“smartsystem”,operatedbyasolidstatecircuit,willinformtheoperatorwhenthetwocordsarepluggedintoseparate

linesbyilluminatingthegreenindicatorlight. Thishelpspreventtrippingcircuitbreakers.

BYPASS SWITCH:

Thebypassswitchcompletelybypassesthecircuitlocator. Usethisfeaturewhenyoucannotgetthegreenlighttocomeonandyoubelievethat

thetwocordsareonseparatecircuits.

CAUTION: Ifthebypassswitchisonandthetwocordsarepluggedintothesamecircuit,thebreakermayblow.

BALLFLOATVACSHUTOFF:

Whentherecoverytankisfull,thefloatsystemwillshutofftheincomingairflowandpreventwaterfromenteringthevacuummotors. Thefloat

maynotworkproperlyifthefloatfilteriscloggedorifthereisfoaminthetank.

CAUTION: Toavoidvacmotordamage,alwaysmakesurethefloatfilteriscleanandtheballtravelsfreelybeforeturningonthe

machine,anduseadefoamerwheneverfoamispresent.

TROUBLE SHOOTING:

IF THIS OCCURS CHECK THIS

NOSPRAY

PUMPWON’TRUN

Solutiontankisempty.

Cloggedspraytip.

Pumpnotrunning.

Valveonwandnotoperating

Nopowertopump. Testtheswitch. Testthepumpmotor.Replaceifnecessary.

Debrispluggingcleaningtoolorvacuumhose.

Draingateisnotcompletelyclosed,orsealsaredamaged. Vacuumlidisnotclosedorgasketisdamaged.

Nopowertomotor. Testtheswitch. Testthevacuummotor.

Sprayingtoolong. Trysprayingfor12-15secondspercycle.

Heatexchangerneedstobeflushed.

Wrongtoolbeingused.

Toomuchwaterpassingthrough,longerhoseorlargerdiameterhose,thanstandard

Heatisnotturnedon. Eitherthegreenlightmustbeonorthebypassswitchmustbeturnedon.

Nopowerinthewalloutlet-checktoseeifthebreakerhastripped.

Nopowertothebypassswitch-checkwiringfor‘opens’.

Nopoweroutofbypassswitch,followtroubleshootingstepstoisolatetheproblemorcallyourdistributorfor

additionalhelp

LOW SUCTION

NO SUCTION

LOW HEAT

NO HEAT

SPECIFICATIONS:

RotomoldedBody:

Vacuum:

VACShutoff:

Pump:

Waterlift:

Heat:

Heater:

Weight:

Dimensions:

LifetimeWarranty

Two,2-stage5.7”

Ballfloat

Demandpump,100psi

150”

212º F

2000Watts

75lbs.

25.5Hx18Wx 28.75L(inches)

revised10/10

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

6 - FORM NO. 56041894

14 15

16 17

15A

27A

39 40

16A

59A

34 35

10 11

10A

40A

40 40B

07/22/2005

COBRA-H

RTXE ACTOR

32A

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

FORM NO. 56041894 - 7

1 FP231A DrainGateAssembly

2 21C Screw, 8-32 X 5/8”, S/S

3 908 Latch

4 187 O-Ring,small

4A 187B Washer, rubber

4B 185 Nut 1-1/2”

5 FP208 Vacuum Tank, complete

6 907 Hose Barb, 1-1/2”

7 922 Elbow, PVC, 1-1/2”

8 1074 Gasket (machinesmadeafter2-15-05)*

9 2086 Lid&Ring(machinesmadeafter2-15-05)*

9A FP436 ChainandHardware

10 FP193 Ball Float Assembly, complete

11 185 Nut, 1-1/2”

12 187B Washer, rubber

13 922 PVC, elbow, 1-1/2”

14 156 Hose Clamp (size 28)

15 FP171 Hose, vacuum, rubber 2” X 20”

15A FP171C Hose, vacuum, rubber 2” X 16”

16 FP207 Heat Exchanger, complete

16A 208 Hose Barb

17 198 HoseClamp

18 455 Mount, heat exchanger

19 2012 Hose 1/4” X 26”, Outlet

20 91 Elbow, brass, 90 degree

22 FP439 Gasket, CobraBase

23 FP233 Chain, 13”

24 194 RingClip

25 14 Washer, 1/4”

26 8 Lock Nut, 1/4-20

27 FP324 Vacuum Motor w/Gasket

27A 2013 Gasket,vacuum motor

28 136 Nut, 1/4-20

29 137 Washer, lock, 1/4”

30 135 Bolt, 1/4-20 x 3-1/2”

31 MA-6 Manifold, vacuum

32 FP220 Flange, exhaust, w/Hose

32A 430 Hose, 2” x 3”

33 4 Bolt, 1/4 X 1”

34 8 Lock Nut ,1/4-20

35 see Misc Heat repair kit**

36 918 Heat Sink Plate

39 45 Quick Disconnect, male, 1/4 p.t.

40 115 Washer,Fiber

40A 116A Bushing,Fiber

40B 31 Washer, Brass

41 928 Louver, 3” (includes screws)

42 909A Latch Strike, for Latch, S/S

43 2001A Label, Cobra-H

44 937 Reducer, PVC

45 184 Cord Retainer

46 923B PCB, dual cord sensor***

47 FP336 Mounting Track, PCB

48 910-16.93 Axle, 18-13/16”

49 2003 Wheel, 8”

50 27A Axle Cap

51 495A Power Cord, 25’, yellow

53 5 Bolt, 1/4” X 3/4”

54 FP452 Base, Cobra, black

55 2002 Caster, swivel, #3”

56 HT-2 HoldingTank Cobra

57 207A Filter, pump inlet, 40 mesh

58 FP221 Lid, holding tank

59 2005 Switch Plate

59A 28 Screw, #4 X 3/8”

60 FP578 Switch, Rocker (all)

64 78 Light, green

65 2007 Pump, 100 PSI

66 166 HoseClamp

67 108A HoseBarb/Elbow

68 FP165C Hose, rubber, 3/8” X 13”

69 FP166 Hose, rubber, 3/8”X 48”

70 16 Lock Nut, 6/32

71 2014 Fan, cooling

72 2015 Guard,fan

73 2B1 Screw, 6/32 X 2-1/4”

74 CWBLK CordWrap(Black)

75 203 Washer,plastic

76 260 Nut, acorn, 3/16”

COBRA-H 120V

PARTS LIST

ITEMNo PARTNo DESCRIPTION ITEMNo PARTNo DESCRIPTION

MISCELLANEOUS ASSEMBLIES/PARTS

*FP2008 Dome & Gasket Complete (for

machines made before 2-15-05)

**FP194A Thermistor Control Kit with

Potentiometer, Probe & PCB (for

machines built after 7-2005

**FP194C Thermistor Control Kit, with

Potentiometer, Probe, Cutout & PCB

(for machines built after 7-2005)

***923 PCB for machines built before (2-05)

(NOTE: Items in kits not sold separately)

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

425-322-0133 / 800-257-7982 / FAX: 425-322-0136

11015 - 47th Ave. W. / Mukilteo, WA 98275

VISIT US AT: http://www.usproducts.com

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Indice

Altri manuali U.S. Products Macchina per pavimenti

U.S. Products

U.S. Products PB111-120 Manuale utente

U.S. Products

U.S. Products PEX 500 Istruzioni operative

U.S. Products

U.S. Products COBRA-300H Istruzioni operative

U.S. Products

U.S. Products KING COBRA 1200 PRO Manuale utente

U.S. Products

U.S. Products KING COBRA 1200 PRO Istruzioni operative

U.S. Products

U.S. Products KING COBRA 310 Istruzioni operative

U.S. Products

U.S. Products KING COBRA 150 Istruzioni operative

U.S. Products

U.S. Products Kraken Neptune 500 Istruzioni operative

U.S. Products

U.S. Products ADVANTAGE-400H Series Istruzioni operative

U.S. Products

U.S. Products KING COBRA 300 Istruzioni operative

U.S. Products

U.S. Products 100-041-016 Manuale utente

U.S. Products

U.S. Products Agitator 20 Istruzioni operative

U.S. Products

U.S. Products HYDRAPORT 100SC Istruzioni operative

U.S. Products

U.S. Products KING COBRA 310-CSA Manuale utente

U.S. Products

U.S. Products King Cobra KC-500 Istruzioni operative

U.S. Products

U.S. Products AGITATOR 16 Manuale utente

U.S. Products

U.S. Products COBRA-300H Manuale utente

U.S. Products

U.S. Products SPOTTER Manuale utente

U.S. Products

U.S. Products ADVANTAGE-400H Series Istruzioni operative

U.S. Products

U.S. Products HYDRAPORT 1200 Manuale utente

Manuali Macchina per pavimenti popolari di altre marche

Nilfisk-Advance

Nilfisk-Advance Advance SC370 17B Manuale utente

Numatic

Numatic ET 4045 Manuale utente

HAWK ENTERPRISES

HAWK ENTERPRISES HP1513-180BRUTE Manuale utente

Mytee

Mytee 8070 Mytee-Lite Manuale utente

Kärcher

Kärcher B 140 R Manuale utente

Triple S

Triple S Ace 26T1 Manuale utente

Nilfisk-Advance

Nilfisk-Advance SW 750 Manuale utente

Tornado

Tornado Marathon 2000 98190 Manuale

Windsor

Windsor ADMIRAL Admiral 8 Manuale utente

Numatic

Numatic TTB 1117/100 Manuale utente

Tennant

Tennant 8210D Manuale utente

Nobles

Nobles Frontier Manuale del prodotto

lavina

lavina 21-X Manuale utente

KENT

KENT Edge 28B Manuale utente

Tennant

Tennant 215 Manuale del prodotto

Windsor

Windsor BDP 51/2000C Manuale utente

CleanFreak

CleanFreak DURA-18HD Manuale utente

Nilfisk-Advance

Nilfisk-Advance Warrior 34RST Guida per l'amministratore