Ubiquiti UVC-G3-PRO Manuale utente
Shielded Category 5 (or above) cabling with drain wire should be used for all outdoor
wired Ethernet connections and should be grounded through the AC ground of the
PoE.
We recommend that you protect your networks from harmful outdoor environments
and destructive ESD events with industrial-grade, shielded Ethernet cable from
Ubiquiti. For more details, visit ui.com/toughcable
Surge protection should be used for all outdoor installations. We recommend that
you use two Ethernet Surge Protectors, model ETH-SP, one near the camera and
the other at the entry point to the building. The ETH-SP will absorb power surges and
safely discharge them into the ground.
Hardware Overview
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD
Ethernet Port
Reset Button
10/100 RJ45 port connects to an 802.3af/802.3at or 24V Passive PoE switch for PoE
power and data.
To reset to factory defaults, press and hold the Reset button for more than 10
seconds while the camera is powered on.
Hardware Installation
Wall/Ceiling Mount
1.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD
Altri manuali per UVC-G3-PRO
2
Indice
Altri manuali Ubiquiti Telecamera IP
Ubiquiti
Ubiquiti UVC-G3-BULLET Manuale utente
Ubiquiti
Ubiquiti UniFi Manuale utente
Ubiquiti
Ubiquiti UniFi G3 Flex Manuale utente
Ubiquiti
Ubiquiti UniFi UVC-G4-PRO Manuale utente
Ubiquiti
Ubiquiti UVC-G3 Manuale utente
Ubiquiti
Ubiquiti UniFi UVC-G3-Flex Manuale utente
Ubiquiti
Ubiquiti UVC-G3-DOME Manuale utente
Ubiquiti
Ubiquiti UniFi UVC-Pro Manuale utente
