Uninet IColor 800W Manuale utente

IColor 800W Digital Color + White

Transfer Media Printer

User Manual

Table of Contents

IColor 800W Model Summary Page 3

Unpacking and Installing Consumables Page 3 - 6

Loading Media Page 7

Loading Banner Media (Optional Feature) Page 8 – 9

Removing Jammed Media Page 10

IColor ProRIP Software Introduction Page 11 – 12

IColor ProRIP Software Installation Page 13 - 16

IColor ProRIP Software First Time Setup Page 16 - 21

Using the IColor ProRIP Software Page 22 – 26

Achieving the darkest black color Page 27

IColor SmartCUT Information Page 28

UniNet IColor Consumable Replacement Page 29

Cleaning the Dustproof Glass Page 30 – 31

Color Registration Procedure Page 31

IColor 800W Printing Tips Page 32

Available Media Options Page 33

Transfer Paper Comparison Charts Page 33

IColor 800W System Specifications Page 34

Important note about USB Drives shipped with your system: Do not lose your RIP dongle! This is your

license key and if lost, a cost for replacement will be incurred. Associated USB dongles for software

such as drivers, RIP programs, SmartCUT and more have a 3 month warranty on the physical drive.

UNINET suggests that you limit the physical handling of RIP dongles and use external USB hubs (as an

example). If damaged (past the 3 month warranty period), a cost for replacement will be incurred.

April 2021 Edition – A newer version of this manual may be available at www.icolorprint.com/support

IColor 800W Model Summary

The IColor 800W printer has been developed to produce high-quality, conventional color prints with the out-of-the-

box functionality of printing in white. Now you can print on media up to 12.6” x 49.6” with IColor Technology.

Please follow the enclosed quick setup guide, as well as this manual, to get started. The IColor 800W comes

complete with 4 toner cartridges for full color + white printing (CMYW), including our exclusive fluorescent white

cartridge. Print a white overprint (in one pass) in concert with the IColor ProRIP software. Black is produced using

composite black (made from CMY), and features the blackest composite black in the industry.

Please note that vector and line art images, including text, are likely to produce the best results. For exciting design

ideas and suggestions for using the IColor 800W for maximum effect, please visit our website at

www.icolorprint.com.

IColor Standard 550/800 2 Step media has been optimized to provide quality results when used with the printer,

enabling the user to produce eye-catching designs which may be applied to a variety of textiles and surfaces.

Unpacking and installing consumables

•Optimal Humidity Level:

45% - 65%

•Optimal Temperature Range:

50°F / 10°C - 75°F / 24°C

Operation outside of these

recommend parameters may lead

to poor results.

The use of a dedicated circuit of at least 15 amps is required to avoid

potential fusing issues.

Lift locks up from the bottom of the box, unwrap the printer and team lift to remove from the packaging.

Remove orange tape and packing material as indicated.

Close paper tray and open the main toner compartment.

Remove the rest of the orange tape, set the lock and unpack the toner cartridges.

Gently shake each toner cartridge back and forth 7 or 8 times to loosen the toner that may be settled in the

cartridge due to shipping. Unscrew the toner lock and insert each cartridge into the corresponding section with the

arrow on top.

Close the main toner compartment. Connect either the network or USB cable depending on how you wish to operate

the printer.

Never insert both at the same time, use either network or USB only.

Plug in the power cord and power on the printer.

Loading Media

•If using tray 1, open the paper tray and load media with the print side face up

•Ensure the media locks in underneath the guides before closing the cassette.

•Ensure the paper stack does not exceed the upper limit mark inside the paper tray.

Excess stacking can cause paper jams.

•Be sure to load more than a few sheets in this tray, or multiple sheet feeding may occur.

•Straighten curled or warped media before loading.

•Various sizes of media can be loaded – simply adjust the positions of the side fences and end fence to

match. Once loaded, carefully push the paper tray fully in.

•If using the bypass tray (suggested for transfer media), load the media face down until you hear a beep and

align the media guides to match the media size.

Loading Banner Media (optional feature)

It is possible to feed banner media manually. However, it is recommend to purchase the optional banner

media tray for higher volume printing.

•To open the banner media tray, turn the lock knob clockwise until its triangle mark stops at the unlock mark.

Be careful that your hand does not hit the banner paper guide tray when turning the knob.

•If you cannot turn the knob, turn it while pushing the banner paper guide tray toward the machine.

•Hold the handle in one hand while supporting the back of the bypass tray with the other hand, and then

open the bypass tray slowly.

•Open the bypass tray until it is parallel to the floor. Raise the banner paper guide tray, and then insert it into

the bypass tray until it becomes stable.

•Load the paper face down until you hear the beep.

•Align the paper guides to the paper size. If the guides are not flush against the paper, images might be

skewed or paper misfeeds might occur.

•Open the subtray, and then raise the minor banner paper guide tray. Set the leading edge of the paper

according to the paper size.

•When using paper that has a horizontal width of 1,200 mm (47.3 inches), curl the paper so that its leading

edge touches the minor banner paper guide tray.

•When using paper that has a horizontal width of 900 mm (35.5 inches), curl the paper so

that its leading edge touches the side of the machine.

•When using paper that has a horizontal width of 457.2 – 900 mm (18.00 – 35.5 inches), set the paper so that

its leading edge protrudes from the banner paper guide tray.

•When using paper that has a horizontal width of 148 – 457.2 mm (5.83 – 18.00 inches), set the paper as

loading paper into the bypass tray.

•You can load up to 10 sheets of paper that has a horizontal width of 457.2 – 1,260 mm (18.00 – 49.60 inches)

into the banner paper guide tray.

•When loading multiple sheets of paper into the banner paper guide tray, be sure to load them as individual

sheets and not in a stack.

Closing the Banner Media Tray

•Remove any paper that is loaded.

•Fold the subtray up.

•Slide the paper guides outward to the maximum width.

•Fold up the banner paper guide tray.

•Hold the handle in one hand while supporting the back of the bypass tray with the other hand, and then

close the bypass tray slowly.

•Turn the knob counter-clockwise until its triangle mark stops at the lock mark.

Removing Jammed Media

•To prevent misfeeds, do not leave any torn scraps of paper inside the machine. If the error message remains

displayed even after you remove misfed paper, fully open the front cover, and then close it.

•When removing jammed paper, do not touch the parts with a label indicating ‘hot surface’.

•Do not remove the fusing unit. Doing so will result in loss of print quality.

•To remove paper that has not been fed into the fixing section correctly, remove the jammed paper through

the underside of the fusing unit. If the jammed paper cannot be removed through the underside of the fusing

unit, remove it from the top.

•If you are using the banner paper guide tray attached to the bypass tray, the paper loaded in the bypass tray

may fall out when you remove jammed paper. First remove the paper loaded in the bypass tray, and then

open the right cover.

•If a misfeed occurs, remove the jammed paper by following the procedures indicated in the animation that

appears on the screen and the sticker or sheet inside the front cover.

•The misfeed inside the machine will correspond to the letter in the graphic below, displayed on the control

panel.

Altri manuali per IColor 800W

Indice

Altri manuali Uninet Stampante

Uninet

Uninet iColor 540 Manuale utente

Uninet

Uninet iColor 500 Manuale utente

Uninet

Uninet IColor 800W Manuale utente

Uninet

Uninet OKIDATA C 3400 Manuale utente

Uninet

Uninet icolor 550 Manuale utente

Uninet

Uninet OKIDATA C5500 Istruzioni di installazione e manutenzione

Uninet

Uninet iColor 500 Manuale utente

Uninet

Uninet DTF 100 Manuale utente

Uninet

Uninet OKIDATA C5100 Istruzioni di installazione e manutenzione

Uninet

Uninet iColor 500 Manuale utente

Uninet

Uninet icolor 600 Manuale utente

Uninet

Uninet DTF 1000 Manuale

Uninet

Uninet LEXMARK C522 Istruzioni di installazione e manutenzione

Uninet

Uninet iColor 300 series Manuale utente

Uninet

Uninet IColor 650 Manuale utente

Uninet

Uninet iCOLOR 900 Manuale utente

Uninet

Uninet iColor LF-600 Manuale utente

Uninet

Uninet icolor 550 Manuale utente

Uninet

Uninet IColor 250 Manuale utente

Uninet

Uninet DTF 1000 Manuale utente

Uninet

Uninet IColor 560 Manuale utente

Uninet

Uninet iColor 350 Manuale utente

Uninet

Uninet iColor 500 Manuale utente

Uninet

Uninet icolor 600 Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente