Unitech PT630 Manuale di istruzioni

PT063D-4 Ethernet Cradle Setup

Software needed:

Network Enabler Administrator v2.6

http://www.ute.com/files/software/38_NetworkEnabler.zip

OnlineCom Manager (or OnlineDll.dll)

http://www.ute.com/files/software/20_OnlineCommManagerSetup.exe

Connecting the Cradle to your Network:

1. Connect the 9V power adaptor to the cradle

2. Connect an Ethernet cable to either the IN or OUT (not both)

3. Run Network Enabler Administrator

Network Enabler Administrator:

a. Press the scan button to scan for the cradle once it is connected to your

network

Press the scan button to scan

for the cradle once it is

connected to

y

our network.

b. The Network Enabler Administrator software should see the cradle and

the IP address assigned to it. Double click this IP address for a new window

with all the setting.

c. Click on the “Network” tab and modify the IP address to match the IP

addresses distributed by your router. In this example, the router distributes

10.0.0.x IP addresses. You can enter the Gateway and a DNS Server 1&2

address.

Click the “Network” tab

d. Now select the “Serial” tab and check the “Modify” box. Now click on

the settings that appear below. A new window will pop up that will allow

user to change baud rate, parity, data bits, stop bits and flow control. The

settings above are good settings to use.

e. Now select the “Operating Mode” tab and check the “Modify” box. Make

a note of the port, usually 4001. In this case it was changed to 3001.

Once all these steps are completed and updated the user can close the

Network Enabler Administrator application.

Check this box and

double click the settings

that come up.

Make a note of

this port

4. Run OnlineCom Manager or equivalent application that uses the

“OnlineDll.dll”

Set the IP address and port to the settings saved by the Network Enabler

Administrator application.

Once connected, the OnlineCom Manager application will display the

contents of the PT630 on the left side of the screen and the contents of the

PC on the right.

Note: If PC contents populate but receive “A:\?” on the left side (portable

side), then press “Refresh” under the left text pane.

Altri manuali per PT630

5

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali Unitech PDA

Unitech

Unitech PA760 Manuale utente

Unitech

Unitech PA962 Manuale di installazione e funzionamento

Unitech

Unitech PA960 Manuale utente

Unitech

Unitech EA320 Manuale utente

Unitech

Unitech PA600 Manuale utente

Unitech

Unitech PA950 Manuale di installazione e funzionamento

Unitech

Unitech MR650 Manuale di installazione e funzionamento

Unitech

Unitech PA970 Manuale utente

Unitech

Unitech EA320 Manuale utente

Unitech

Unitech PA966 Manuale utente

Unitech

Unitech EA502 Manuale utente

Unitech

Unitech PA600 Manuale utente

Unitech

Unitech PA600 II Standard Manuale utente

Unitech

Unitech HT682 Manuale utente

Unitech

Unitech PA600 II Standard Manuale utente

Unitech

Unitech PA600 Manuale utente

Unitech

Unitech PA700 Series Manuale utente

Unitech

Unitech RH767 Manuale utente

Unitech

Unitech PA600 Manuale utente

Unitech

Unitech RH767 Manuale utente

Unitech

Unitech HT580 Guida rapida

Unitech

Unitech PA500 Manuale utente

Unitech

Unitech PA820 Manuale utente

Unitech

Unitech PA520BTNF Manuale utente

Manuali PDA popolari di altre marche

SPOT

SPOT SPOT Manuale utente

Palm

Palm handheld Manuale utente

Winmate

Winmate E500QK Manuale utente

Getac

Getac PS236 Manuale utente

Sharp

Sharp CE-1600P Manuale utente

HTC

HTC PHAR100 Manuale utente

Mindeo

Mindeo M40 Manuale utente

Acer

Acer n30 Manuale utente

ASCOM

ASCOM 9D24 EX Manuale utente

HandHeld

HandHeld Nautiz X3 Manuale utente

Casio

Casio PALM Manuale utente

Sharp

Sharp TM-20 Guida rapida

Atid

Atid AT870 Manuale utente

AML

AML M7225 Manuale utente

Audiovox

Audiovox Maestro Manuale tecnico

Casio

Casio PV-750 Plus Manuale di istruzioni e di sicurezza

PSC

PSC Falcon 4220 Manuale utente

Datalogic

Datalogic ELF Manuale utente