Universal Remote Control MASTERCONTROL RF20 Manuale utente

simply MORE powerful

RF20

™

CONTNETS

The RF20 Remote

WELCOME

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: (914) 835-4484 Fax: (914) 835-4532

MASTERCONTROL™ RF20 Owner’s Manual

The information in this manual is copyright protected. No part of this manual may be copied or

reproduced in any form without prior written consent from Universal Remote Control, Inc.

UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR

EDITORIAL ERRORS / OMISSIONS MADE IN THIS MANUAL. The information in this manual may be

subject to change without prior notice. MASTERCONTROL, PowerBlaster, MacroPower, and

SimpleSound are trademarks of Universal Remote Control, Inc. All other brand or product names

are trademarks or registered trademarks of their respective companies or organizations.

LOCATION OF

CONTROLS

Keypad Layout 3

GETTING STARTED Overview 4

Battery Installation 4

Activating Component Commands 5

Light Button 6

BASIC SETUP Overview 7

Pre-Programmed Code Method 7

Learning Method 15

Transmitting (Busy Signal) Icon. 19

Child Lock Feature 19

CUSTOMIZING YOUR RF20

WITH SPECIAL ADVANCED

FEATURES

Customizing the LCD Screen 20

Favorite Channel Setup 23

MacroPower™ Setup 26

SimpleSound™ Setup &

Other 'Punch Throughs' 30

Setting Backlight Options 32

Hiding & Adding Pages 33

Recalling Pre-programmed

Setup Code Numbers 35

Cloning other RF20s 36

ERASING

COMMANDS

Overview 37

Erasing Learned Button,Macro or Favorite

Channel Commands 37

Re-setting RF20 to Original

Factory Default Settings 39

THE OPTIONAL

POWERBLASTERTM PowerBlasterTM 41

PRE-PROGRAMMED

CODE TABLES TV 45

CABLE 48

DVD 50

VCR 53

AUDIO 56

SAT 59

CD 60

DVR 62

AUX 63

Pre-Programmed Code Tables 44

OTHER INFO FAQ 65

Warranty 66

Specifications 66

Information To The User 67

Warning 67

NOTE 68

PREPROGRAMMED

CODE NOTES Pre Programmed Code Notes 43

Congratulations on purchasing Universal

Remote Control’s MASTERCONTROL™

RF20 Pre-programmed and Learning

Remote Control!

You now have the power to control your

entire home entertainment system with

one easy-to-use remote.

The RF20 can be used with thousands of

audio/video Components because of the

extensive code library pre-programmed

into the remote. And, the RF20’s

impressive lineup of special advanced

features can automate and customize the

operation of your system in many ways.

So... get ready to sit back, relax and

simplify your home entertainment

experience.

The Quick Setup DVD Program Guide

supplied with the RF20 will assist you in

programming your remote by guiding you

through an easy step-by-step process.

This Owner’s Manual is designed as a

companion reference source to the DVD

Guide, should you need to refer back to a

particular section, or review certain

instruction detail not covered in the DVD.

However, if you are unable to watch the

DVD Guide for some reason, everything

you need to know about programming the

RF20 is contained in this Manual.

Congratulations!

The RF20 Remote

3 4

CONTROL LOCATIONS

Keypad Layout

GETTING STARTED

Getting Started-Overview

This is what MASTERCONTROL™ RF20 is all about!

The RF20 is designed to operate up to 10 different Audio/Video Components

and is pre-programmed to operate virtually all brands of TV, VCR, DVD and CD

Players, Cable Set Top Boxes, Satellite Receivers, TiVo and other DVRs, Audio

Components, Tape Decks, Multimedia PCs, XM Radio, Ipod, X-Box, Lighting

Controls and other custom installation products. It also offers an impressive

lineup of special features designed to provide you with many time-saving con-

veniences and enhance your overall entertainment experience. However, we

strongly recommend that you fully complete all of the Basic Setup steps before

proceeding to customize your RF20 with any of the special advanced features.

Battery Installation

The very first step is to insert the four

AAA batteries that are included in the

package into the battery compart-

ment located in the back of the

remote. Just press the tab and lift off

the cover.

Please be sure to insert the batteries

correctly as you see in the diagram.

Remember, there is a positive and

negative end to each battery and you

can tell by the + (positive) and

- (negative) symbols. Once the

batteries are correctly installed,

replace the cover.

Now you’re ready to start!

Overview & Battery Installation

TITLE

FAVORITE

CHANNEL

PAGE

BUTTONS

changes the page of

buttons displayed

PAGE

NUMBERS

MAIN

BUTTON

takes you to the main menu

FUNCTION

BUTTONS

LIGHT

BUTTON

SCREEN-LABELED

DISPLAY BUTTONS

5 6

GETTING STARTED

Activating Component Commands

LIGHT BUTTON

Activating Component Commands –

Simple, Easy, Intuitive

Once you’ve programmed RF20 for your

Components, all you have to do to operate

a specific Component is first, press the

MAIN button. This will display Page 1 of

the MAIN menu on the LCD screen. Page

1 of the MAIN menu displays five

Components. Then, simply select the

Component you want to operate by

pressing the corresponding Screen-

Labeled Component Display Button on the

right side of the LCD Screen. As an

example, if you press the TV Display

Button, the display label at the top of the

screen will change from MAIN to TV, and

all the but- tons on RF20 will work your TV.

To operate another Component, simply

press the MAIN button again to return to

Page 1 of the MAIN menu and select the

next Component you want to operate.

If you don’t see the Component you want

to control on Page 1 of the MAIN menu,

just use the PAGE ( ) ( ) buttons on the

left side of the screen to bring up Page 2

of the MAIN menu which displays an

additional five Components.

Each Component is provided with five

pages of pre-labeled command display

buttons (or space for additional command

display buttons). Once again, simply use

the PAGE ( ) ( ) buttons to take you to

the next command page, or return you to

the previous command page.

Light Button

The fully backlit keypad makes the RF20 easy to use in the dark or dim lighting

conditions. Simply press the LIGHT button to backlight all the keypad buttons and

LCD screen.

To turn off the backlight, press the LIGHT button again, or just wait ten seconds (the

backlight automatically shuts itself off). Lights out!

Try it out!

TV DEVICE

BUTTON

MAIN

BUTTON

LIGHT

BUTTON

7 8

Overview &

Pre-Programmed Code Method

BASIC SETUP

Basic Setup - Overview

There are two ways to program the RF20:

• The Pre-Programmed Code Method

• The Learning Method

The Pre-Programmed Code Method allows you to set up all the buttons at once, so

it’s the fastest and easiest of the two methods. The Learning Method allows you to

transfer functions from other remotes (old or new), one button at a time.

Pre-Programmed Code Method

STEP 1:

The pre-programmed 3-digit codes are

found in the back of this Manual on page

45. The codes are listed by Component

category (i.e., TV, VCR, DVD, etc.), then by

brand name. For instance, if you want to

locate a code for a Sony TV, first locate

the TV category, and then look for the

Sony brand.

Once you have located the 3-digit code (or

in some cases, several code numbers) for

the Component that you want to operate

with your RF20, write them ALL down on a

piece of note paper. It’s important that you

write down all the codes because

only one code is going to work for you.

STEP 2:

Now, turn on the Component you want to

program... let’s say your TV to start. Look

up your TV’s manufacturer setup code

from your reference list.

STEP 3:

Press and hold the MAIN and ENT (Enter) but-

tons at the same time for approximately 3 sec-

onds, until the word “SETUP” is displayed at the

top of the LCD screen. This signals that you are

now in setup mode.

IMPORTANT:

You now have 30 seconds to perform the next step

while you are in SETUP mode. If you don’t press a

button within 30 seconds, SETUP will disappear

from the screen, signaling that you have exited

setup mode and you will need to start over.

MAIN

BUTTON

ENTER

BUTTON

910

BASIC SETUP

Pre-Programmed Code Method

STEP 4:

Press the P-PRO display button

to select the Pre-Programmed

Method.

The screen will then display the five

Components from Page 1 of the MAIN

menu.

To display Page 2 of the MAIN menu

that lists an additional five Components,

simply press the PAGE ( ) ( ) buttons.

STEP 5:

Press the Component display button you

want to program.

For example: If you want to setup the TV

Component button, press the TV

Component display button. The display at

the bottom of the LCD screen will flash

“FROM - TABLE”.

STEP 6:

In this step you verify the type of compo-

nent you plan to operate with this compo-

nent button. For example: If you plan

to operate the TV component with the TV

button, simply press the TV display button

once again. However, if for example you

are setting up AUX to operate a second

DVD Player, you would first need to press

AUX in Step 5, and then DVD in Step 6.

FIRST FIVE

DEVICE NAMES

PAGE

BUTTONS

P-PRO

BUTTON

11 12

BASIC SETUP

Pre-Programmed Code Method

Pre-Programmed Code Methoda

NOTE:

If the Component fails to turn off after you have entered all

the code numbers listed for your brand, you can scan through

all the other code numbers that are pre-loaded into the RF20

for that Component (in this case TV) by using the UP or

DOWN display buttons on the screen. (There is a chance that

your Component was actually manufactured by another

brand.) However, most of the code tables are so large that it

is usually faster to use the Learning Method on Page 15.

STEP 7:

Point the RF20 toward the Component you

want to program, (in this example, TV), and

punch in the 3-digit code that you wrote

down for that specific Component. Use the

Number buttons 0-9 on the remote to

punch in the code. If the 3-digit code

number that you just punched in is

correct, the Component will turn off. If the

Component does not turn off, continue

entering code numbers from your list until

the Component turns off. Somebrands

have several possible code numbers.

STEP 8:

When the Component turns off, press the

ON button to turn the Component back on.

Now you can test the Volume and Channel

buttons (for TV), or PLAY and STOP (for

VCR and DVD) to make sure they all work.

If any of the buttons do not work properly,

you need to find a new correct code. For

example, maybe your Sony TV turned off

with code number 147, but the volume

controls did not work properly. If this is

the case, try the next code number listed

for that Component until you find a perfect

match.

BUTTON

VOLUME

BUTTONS

CHANNEL

BUTTONS

PLAY

BUTTON

STOP

BUTTON

UP & DOWN

BUTTONS

NUMBER

BUTTONS

13 14

BASIC SETUP

Pre-Programmed Code Method

Pre-Programmed Code Methoda

STEP 9:

Once you have found the right code, save

the code number by pressing the SAVE

display button that appears on the LCD

screen. The LCD screen will blink

“SAVED” two times, signaling that the

code number has been successfully

saved.

STEP 10 :

Exit SETUP mode by pressing the MAIN

button two times.

When the LCD screen displays MAIN, you

are back in normal operating mode.

NOW, PROGRAM THE REST OF YOUR

COMPONENTS BY REPEATING STEPS 1

THROUGH 9. IN MOST SYSTEMS,YOU

CAN FINISH BASIC SETUP IN JUST A

FEW MINUTES AND PUT ALL YOUR OLD

REMOTES AWAY.

IF YOU ARE STILL MISSING COMMANDS

TO CONTROL ANY OF YOUR COMPO-

NENTS, USE THE LEARNING METHOD

ON PAGE 15.

SAVE

BUTTON

MAIN

BUTTON

15 16

BASIC SETUP

Learning Method

The RF20 can actually ‘learn’ commands from other remote controls (old or new),

one-button-at-a-time, so it will never become obsolete. RF20 is the last remote

you’ll ever need!

Just follow these simple steps:

STEP 1:

Line-up the RF20 with the other remote control, head-

to-head, one or two inches apart.

STEP 2:

On the RF20, press and hold the MAIN and ENT (Enter)

buttons at the same time for approximately three sec-

onds, until the word “SETUP” is displayed at the top of

the LCD screen. This signals you are now in SETUP

mode.

IMPORTANT

You now have 30 seconds to perform the

next step while you are in SETUP mode. If

you don’t press a button within 30 seconds,

SETUP will disappear from the screen, sig-

naling that you have exited setup mode and

you will need to start over.

STEP 3:

Press the LEARN display button on the LCD

screen. The top of the screen will change to

“LEARN” and display the five Components

from Page 1 of the MAIN menu.

STEP 4:

Select the Component you want to teach

commands to by pressing that Component

display button on the LCD screen (in this

example, TV). The top of the TV screen will

change to “TV”.

To display Page 2 of the MAIN menu that

lists an additional five Components,

simply press the PAGE ( ) ( ) buttons.

NOTE: If you want to teach any command to a

Component button, press the desired Component

display button once the top of the screen dis-

plays “MAIN”, by pressing the PAGE button. The

top of the screen wil change to “READY”. Then

go to STEP 6.

MAIN

BUTTON

ENTER

BUTTON

LEARN

BUTTON

17 18

BASIC SETUP

Learning Method

STEP 5:

Press any button on the RF20 that you

want to teach a command to. The top of

the screen will change to “READY” and

the bottom of the screen will display the

button name you pressed.

STEP 6:

Press and hold the button on the other

remote control that you want to ‘teach’ to

the RF20 until the LCD display on the RF20

changes to either “GOOD” or “FAILD”. If

the “GOOD” label appears on top of the

display, you were successful. If the

“FAILD” label appears on top of the display,

try ‘teaching’ thesame button to the RF20

once again by repeating STEPS 5 and 6.

STEP 7:

Now, continue to teach the RF20 any other

commands from your other remotes by

repeating STEPS 4 through 6 (to go back

to STEP 4, simply press MAIN once).

STEP 8:

Once you have completed teaching all the

button commands to the RF20, return to

normal operation by pressing the MAIN

button twice.

• Move to another room. Plasma TVs, sun-

light, halogen or quartz lighting can inter-

fere with the learning process.

• Even though the old remote seems to be

working fine, put in fresh alkaline

batteries.

• Gradually vary the distance between the

remote controls.

Try 1”, 2” and so on, up to 4 feet.

• Try tapping the button on your old remote

instead of pressing and holding it during

the learning process.

Some additional Information regarding the

Learning Process:

• Learned functions override any existing

pre-programmed functions on the

remote control.

• All buttons can be learned except for the

PAGE, MAIN and LIGHT buttons.

• Learned functions are automatically

erased when a new function is learned

on the same button.

• Learned functions are retained even

after a different Setup Code Number is

programmed into the remote.

• To return to an original pre-programmed

function, a learned function must be

erased.

NOTE: If you don't see the display button you

would like to teach on the LCD screen, use the

PAGE ( ) ( ) buttons. The only buttons you

can't teach are the PAGE and MAIN buttons.

NOTE: Test all your new commands. If any of them

don’t work, try the Learning Method again, follow-

ing these suggestions:

Altri manuali per MASTERCONTROL RF20

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Universal Remote Control Telecomando

Universal Remote Control

Universal Remote Control OCE-0040A Manuale utente

Universal Remote Control

Universal Remote Control Complete Control MX-880 Manuale utente

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8500 Manuale utente

Universal Remote Control

Universal Remote Control BENDER Manuale utente

Universal Remote Control

Universal Remote Control UR4U-MDVR2 Manuale utente

Universal Remote Control

Universal Remote Control MX-980 Manuale utente

Universal Remote Control

Universal Remote Control CLIKR-5 UR5L-8520L Manuale utente

Universal Remote Control

Universal Remote Control UR4-DCT Manuale utente

Universal Remote Control

Universal Remote Control LIGHTING Manuale utente

Universal Remote Control

Universal Remote Control Easy Clicker UR2-211 Manuale utente

Universal Remote Control

Universal Remote Control UR4-DCT Manuale utente

Universal Remote Control

Universal Remote Control Complete Control MRF-260 Manuale utente

Universal Remote Control

Universal Remote Control R7 - SPECS SHEET Manuale utente

Universal Remote Control

Universal Remote Control UR5-MDVR Manuale utente

Universal Remote Control

Universal Remote Control UR3-SR3-DTA Manuale utente

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8780L Manuale utente

Universal Remote Control

Universal Remote Control osiris Manuale utente

Universal Remote Control

Universal Remote Control Complete Control KP-900 Manuale utente

Universal Remote Control

Universal Remote Control Aeros MX-850 Manuale utente

Universal Remote Control

Universal Remote Control UR4U-MDVR2 Manuale utente

Universal Remote Control

Universal Remote Control UR4U-MDVR-CHD2 - SPECS SHEET Manuale utente

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8780L Manuale utente

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8780L Manuale utente

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8500 Manuale utente

Manuali Telecomando popolari di altre marche

Panasonic

Panasonic EUR7622KB0 Manuale utente

Bang & Olufsen

Bang & Olufsen Beo4 Manuale utente

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuale utente

Multiplex

Multiplex PROFI TX 9 Manuale utente

One Remote

One Remote RMB4 Manuale utente

FUTABA

FUTABA 9ZAP - PART2 Manuale utente

HR Matic

HR Matic HR MULTI 3 Manuale utente

Yamaha

Yamaha ACC-GNRST-30-20 Manuale utente

EisSound

EisSound KBSOUND Manuale utente

Marantz

Marantz RC101 Manuale utente

Conrad

Conrad FS20 TC6 Manuale utente

Anritsu

Anritsu MP1777A Manuale utente

Niles

Niles WVC100 Guida alla risoluzione dei problemi

RCA

RCA RCU1300 Manuale utente

Bang & Olufsen

Bang & Olufsen BEO6 Manuale utente

GE 94901 Manuale utente

Onbon

Onbon YQ1-75 Manuale utente

FUTABA

FUTABA R7108SB Istruzioni per l'installazione