V-tech Accessory Handset for use with the CS6319 CS6329 or... Manuale utente

User’s manual

Accessory handset for

use with VTech models

CS6328-2/CS6328-3/

CS6328-4/CS6328-5/

CS6319/CS6319-2/

CS6319-3/CS6319-4/

CS6329/CS6329-2/

CS6329-3/CS6329-4/

CS6329-5

Model: CS6309

Congratulations

on purchasing your new VTech product. Before using this

telephone, please read the Important safety instructions on

page 9 of this manual.

This manual has all the feature operations and troubleshooting

necessary to install and operate your new VTech telephone.

Please review this manual thoroughly to ensure proper

installation and operation of this innovative and feature rich

VTech product. For support, shopping, and everything new at

VTech, visit our website at www.vtechphones.com.

In Canada,

please visit www.vtechcanada.com.

The ENERGY STAR®program (www.energystar.

gov) recognizes and encourages the use of

products that save energy and help protect our

environment. We are proud to mark this product

with the ENERGY STAR®label indicating it meets

the latest energy efciency guidelines.

Compatible with

Hearing Aid T-Coil

TIA-1083

Telephones identied with this logo have reduced

noise and interference when used with most T-coil

equipped hearing aids and cochlear implants. The

TIA-1083 Compliant Logo is a trademark of the

Telecommunications Industry Association. Used

under license.

Table of contents

Getting started .............................. 1

Parts checklist................................. 1

Battery installation .......................... 2

Battery charging.............................. 3

Add and register a handset............. 4

Replace a handset .......................... 5

Handset layout ................................ 6

Appendix........................................ 8

Battery............................................. 8

Important safety instructions........... 9

Precautions for users of

implanted cardiac pacemakers.. 10

Operating range ............................ 10

Maintenance.................................. 11

About cordless telephones............ 12

The RBRC®seal............................ 13

Warranty........................................ 14

FCC, ACTA and IC regulations ..... 16

Technical specications ................ 18

Parts checklist

Your telephone contains the following items. Save your sales

receipt and original packaging in the event warranty service

is necessary.

User’s manual

Handset

Charger and power adapter

Battery Battery

compartment cover

Getting started

To purchase replacement batteries or power adapters,

visit our website at www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to www.vtechcanada.com

or dial 1 (800) 267-7377.

CHARGE

light

Battery installation

Install the battery as shown below.

If the battery compartment cover is on the handset,

press on the indentation and slide the cover to remove.

Plug the battery connector securely into the socket

inside the handset battery compartment, matching the

color-coded label.

Place the battery with the label THIS SIDE UP facing up

and the wires inside the battery compartment.

Align the cover at against the battery compartment,

then slide it towards the center of the handset until it clicks

into place.

Charge the handset by placing it in the telephone base or

charger. The CHARGE light is on when the handset charges.

If the handset will not be used for a long time, disconnect

and remove the battery to prevent possible leakage.

To purchase replacement batteries, visit our website at

www.vtechphones.com or call 1 (800) 595-9511. In

Canada, go to www.vtechcanada.com or dial

1 (800) 267-7377.

•

Getting started

Battery charging

Once you have installed the battery, the screen indicates the

battery status (see the table below). If necessary, place the

handset in the telephone base or charger to charge the

battery. For best performance, keep the handset in the

telephone base or charger when not in use. The battery is fully

charged after 16 hours of continuous charging. See the table

on page 8 for battery operating times.

If the screen is blank, you need to charge the handset without

interruption for at least 10 minutes to give the handset enough

charge to use the telephone for a short time. When the battery

is low, the handset beeps four times every minute, shows

LOW BATTERY and a ashing icon. If you are on a call

in low battery mode, the handset has four short beeps to

alert you.

The following table summarizes the battery charge indicators

and actions to take.

Battery indicators Battery status Action

The screen is blank. Battery has no

charge and the

handset cannot be

used.

Charge without

interruption (at least

10 minutes).

The screen shows

PLACE IN CHARGER

and ashes.

Battery has very

little charge and

the handset cannot

be used.

Charge without

interruption (at least

four minutes).

The screen shows

LOW BATTERY and

ashes. The handset

beeps four times every

minute.

Battery has enough

charge to be used

for a short time.

Charge

without

interruption

until

the screen shows

HANDSET X (about

30 minutes).

The screen shows

HANDSET X.

Battery is charged. To keep the battery

charged, place it in

the telephone base

or charger when not

in use.

If you do not plug in the battery into the handset and place it in the

telephone base or charger, the screen displays NO BATTERY.

Getting started

Add and register a handset

Each newly purchased handset (CS6309) must be registered

to the telephone base before use. When rst purchased,

each handset shows 1.PRESS FIND HS ON BASE 4 SEC

and 2.THEN PRESS # ON HANDSET alternately. You

may need to charge the handset before registering to the

telephone base. For more details on battery charging, see

page 3.

To make registration easier, read all the instructions on this

page before you begin.

To register a handset:

Place the unregistered handset in the

telephone base. If 1.

PRESS FIND HS

ON BASE 4 SEC and 2.THEN PRESS #

ON HANDSET

do not appear alternately

on the handset screen after a few

seconds, remove the handset and place it

in the telephone base or charger again.

On the telephone base, press and hold

/FIND HANDSET for about four seconds

(until the red IN USE light on the

telephone base turns on) and then

release the button.

Remove the handset from the telephone

base or charger. Press # and the handset

displays REGISTERING...PLEASE WAIT. It takes about

10 seconds to complete the registration. The handset

shows HANDSET REGISTERED and you hear a beep

when the registration completes.

When the registration is complete, the newly registered

handset is assigned the next available handset registration

number. For instance, if you already have HANDSET 1, the

next registered handset will be HANDSET 2.

If the registration fails, the handset shows 1.PRESS FIND

HS ON BASE 4 SEC and 2.THEN PRESS # ON HANDSET

alternately. To reset the handset, remove the handset from

the telephone base and place it back in. Try the registration

process again.

You cannot register a handset if any other system handset

is in use.

Only one handset set can be registered at a time.

•

Getting started

Replace a handset

If you want to replace a handset or re-assign the designated

handset number of a registered handset, you must deregister

all the handsets and then individually register each handset.

To make deregistration easier, read all of the instructions on

this page before you begin.

To deregister all handsets:

Press and hold /FIND HANDSET on the telephone

base for about 10 seconds (until the IN USE light on the

telephone base turns on and starts to ash), then release

/FIND HANDSET.

Press and release /FIND HANDSET again. You must

press /FIND HANDSET while the IN USE light is still

ashing. The IN USE light ashes for approximately

seven seconds.

The deregistration process takes about 10 seconds to

complete. All handsets show 1.PRESS FIND HS ON BASE

4 SEC and 2.THEN PRESS # ON HANDSET

alternately

when the deregistration completes.

If deregistration fails, you may need to reset the telephone and

try again.

To reset:

Pick up the registered handset and then press /FLASH.

Press OFF/CLEAR and place the handset back in the

telephone base.

-OR-

Unplug the power from the telephone base, then plug it

back in.

You cannot deregister a handset if any system handset is

in use.

Getting started

Handset layout

CHARGE light

On when the handset is charging in

the telephone base or charger.

While reviewing a call log entry, press

repeatedly to add or remove 1in

front of the telephone number before

dialing or saving it in the directory.

/FLASH

Press to make or answer a call.

During a call, press to answer an

incoming call when you receive a call

waiting alert.

REDIAL/PAUSE

Press to review the redial list.

While dialing or entering numbers

into the directory, press and hold to

insert a dialing pause.

(speakerphone)

Press to make or answer a call.

During a call, press to switch

between speakerphone and handset.

TONE

While you have set the dial mode

to pulse and on a call, press to

temporarily change to tone dial mode.

VOL/CID (volume/caller ID)

Press to review the call log when the

telephone is not in use.

While in a menu, press to scroll down.

During a call, press to decrease the

listening volume.

Getting started

Handset layout

VOL/ (volume/directory)

Press to enter the directory when the

telephone is not in use.

While in a menu, press to scroll up.

During a call, press to increase the

listening volume.

MENU/SELECT

Press to show the menu.

While in a menu, press to select an

item, or save an entry or setting.

OFF/CLEAR

During a call, press to hang up.

While the handset is ringing, press to

silence the ringer temporarily.

While the telephone is not in use,

press and hold to erase the missed

calls indicator.

During programming, press to exit

without making changes.

Press repeatedly to show other

dialing options when reviewing a call

log entry.

MUTE/REMOVE

While on a call, press to mute the

microphone.

While reviewing the call log, directory

or redial list, press to delete an

individual entry.

Press to delete digits when predialing.

INT (intercom)

Press to start an intercom

conversation or transfer a call.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali V-tech Cornetta

V-tech

V-tech CareLine SN1157 Manuale utente

V-tech

V-tech IS7101 Manuale utente

V-tech

V-tech DS6751 Manuale utente

V-tech

V-tech 17450 Manuale utente

V-tech

V-tech LS6002 Manuale utente

V-tech

V-tech LS6204 - Cordless Extension Handset Manuale utente

V-tech

V-tech VSP600A Manuale utente

V-tech

V-tech CTM-A2116 Manuale utente

V-tech

V-tech DS6600 Manuale utente

V-tech

V-tech i 5807 Manuale utente

V-tech

V-tech IP 811 Manuale utente

V-tech

V-tech VSP601 Manuale utente

V-tech

V-tech CS6219 Manuale utente

V-tech

V-tech QW2603 Guida utente

V-tech

V-tech Analog Contemporary Series Manuale utente

V-tech

V-tech vt5820 Manuale utente

V-tech

V-tech USB7050 Manuale utente

V-tech

V-tech USB 711 Manuale utente

V-tech

V-tech VC7100A Manuale utente

V-tech

V-tech CS6409 Manuale utente

V-tech

V-tech DS6071 Manuale utente

V-tech

V-tech ErisTerminal VDP801 Manuale utente

V-tech

V-tech i5803 - Cordless Extension Handset Manuale utente

V-tech

V-tech CS6199-4 Manuale utente

Manuali Cornetta popolari di altre marche

Swissvoice

Swissvoice ePure HD Manuale utente

Philips

Philips TD6736/BH051P Manuale utente

ASCOM

ASCOM I62 - Manuale utente

LG-Ericsson

LG-Ericsson LIP-9010 Manuale utente

GE 1583 Manuale utente

iiNet

iiNet Handset Manuale utente

ASCOM

ASCOM 9p23 Manuale utente

AT&T

AT&T DLP70110 Manuale utente

AirCell

AirCell ST 3100 Manuale utente

Eaton

Eaton HHIR-LCD-PROG Istruzioni per il montaggio

Mitel

Mitel 112 Manuale utente

SBC

SBC SBC-381H Manuale utente

Mitel

Mitel 5602 Manuale utente

ASCOM

ASCOM d81 Messenger Istruzioni per l'installazione

SpectraLink

SpectraLink 7522 Manuale utente

Avaya

Avaya L100 Series Come usare

ooma

ooma HD2 Handset Manuale utente

Yealink

Yealink IPW56 Manuale utente