Valor Fires 752 Istruzioni per l’uso

5122667/03

Model 752

INSET LIVE FUEL EFFECT GAS FIRE

Fitted with a

Broadway, Liberty,

Valor Landscape 2 Gas or

Vermont fascia

(GC No. 32-032-74)

We trust that this guide gives

sufficient details to enable this

appliance to be installed, operated

and maintained satisfactorily.

However, if further information is

required, our

Valor Fires Technical Helpline will

be pleased to help.

Telephone 0844 8711 565 (National

call rates apply in the United

Kingdom).

In the Republic of Ireland

Telephone 0044 844 8711 565.

INSTALLER: Please leave this guide with the owner

INSTALLER AND OWNER GUIDE

(including photocopying), stored in any medium by electronic means (including in any

retrieval system or database) or transmitted, in any form or by any means, whether

electronic, mechanical, recording or otherwise, without the prior written permission of

the copyright owner.

Applications for the copyright owner's permission to reproduce any part of this

publication should be made, giving details of the proposed use, to the following

address: The Company Secretary, Baxi Heating UK Limited, The Wyvern Business

Park, Stanier Way, Derby, DE21 6BF.

Warning: Any person who does any unauthorised act in relation to a copyright work

may be liable to criminal prosecution and civil claims for damages.

Valor Fires, Erdington, Birmingham B24 9QP

www.firesandstoves.co.uk

Because our policy is one of constant development and improvement, details may vary slightly from

those given in this publication

THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20).

WHEN CONVERTED USING CONVERSION KIT NO. 0595221 THIS APPLIANCE

IS FOR USE WITH PROPANE GAS (G31).

THIS APPLIANCE IS SUITABLE ONLY FOR INSTALLATION IN THE UNITED

KINGDOM (GB) AND THE REPUBLIC OF IRELAND (IE).

Safety First.

Valor Fires fires are CE Approved and designed to meet the appropriate British

Standards and Safety Marks.

Quality and Excellence.

All Valor Fires fires are manufactured to the highest standards of quality and

excellence and are manufactured under a BS EN ISO 9001 quality system accepted

by the British Standards Institute.

The Highest Standards

Valor Fires is a member of SBGI and HHIC (Heating and Hot water Industry Council)

that work to ensure high standards of safety, quality and performance.

Careful Installation

This gas fires must be installed by a competent GAS SAFE REGISTER engineer

(GAS SAFE REGISTER or CORGI engineer outside of UK) in accordance with our

installer guide and should not be fitted directly on to a carpet or floor of combustible

material.

Page 4

INSTALLER GUIDE

FOR OWNER GUIDE SEE PAGES 35 TO 47

CONTENTS

Section Heading Page

INSTALLER GUIDE 4 - 34

OWNER GUIDE 35 - 47

1. SAFETY AND UNPACKING 7

2. APPLIANCE DATA AND EFFICIENCY 8

2.1 General information. 8

2.2 Efficiency. 8

3. GENERAL INSTALLATION REQUIREMENTS 9

3.1 Regulations, Standards and Law. 9

3.2 Ventilation requirements. 10

3.3 The Atmosphere sensing device (ASD). 10

3.4 Fireguard requirements. 10

3.5 Room considerations. 10

3.6 Chimney preparation. 10

3.7 Fireplace preparation. 11

3.8 The hearth. 11

3.9 Fireplace clearances. 12

3.10 Installation options. 14

3.10.1 Conventional fireplace and hearth. 14

3.10.1.1 ‘Hole-in-the-wall’ Installations. 14

3.10.2 Metal flue box and hearth. 15

3.10.3 Precast concrete or clay flue block system and hearth. 16

3.11 Flues. 17

3.12 Propane gas fires. 17

4. PACK CONTENTS 18

5. FIREPLACE CHECK 20

5.1 Soundness for appliance attachment. 20

5.2 Fireplace flue pull. 20

6. IGNITION CHECK 20

7. GAS SUPPLY CONNECTION 21

8. PREPARING APPLIANCE FOR INSTALLATION 21

8.1 Appliance preparation. 21

8.2 Fitting the foam seal. 22

8.3 The flue restrictor. 22

9. HOTBOX INSTALLATION 23

9.1 Hotbox installation. 23

9.2 Floor sealing (All Installations). 24

Page 5

INSTALLER GUIDE

Continued on next page

CONTENTS (Continued)

Section Heading Page

10. BURNER INSTALLATION 25

10.1 Burner and supply pipe installation. 25

10.2 Fitting the batteries. 25

10.3 Preliminary burner checks. 25

10.4 Lighting the pilot. 25

10.5 Checking the heat settings. 26

10.6 To turn the fire back to pilot setting. 26

10.7 To turn the fire off. 26

10.8 Using the remote control handset. 26

10.9 Inlet pressure check. 27

10.10 Fitting the burner tray trim. 27

11. FITTING THE CERAMIC FUEL EFFECT 27

12. FASCIA INSTALLATION 28

13. FULL OPERATING CHECKS 28

14. SPILLAGE & FLAME SUPERVISION CHECKS 29

14.1 Check for spillage. 29

14.2 Flame supervision and spillage monitoring system. 29

15. FINAL REVIEW 30

16. SERVICING & PARTS REPLACEMENT 31

16.1 Checking the aeration setting of the burner. 32

16.2 To remove the complete burner unit. 32

16.3 To remove the pilot unit. 33

16.4 To remove the gas valve. 33

16.5 To replace the burner. 34

16.6 To remove the main burner injector. 34

16.7 To remove the appliance from the fireplace. 34

INSTALLER GUIDE

1. SAFETY AND UNPACKING

Installer

Before continuing any further with the installation of this appliance please read the

following guide to manual handling

The lifting weight of this appliance is as below (kg):

Model Heat Engine Firefront Combined Weight

Broadway 7.45 6.35 13.8

Valor Landscape 2 Gas 7.45 6.35 13.8

Vermont 7.45 6.26 13.71

Liberty 7.45 6.26 13.71

One person should be sufficient to lift the fire. If for any reason this weight is

considered too heavy then obtain assistance.

When lifting always keep your back straight. Bend your legs and not your back.

Avoid twisting at the waist. It is better to reposition your feet.

Avoid upper body/top heavy bending. Do not lean forward or sideways whilst

handling the fire.

Always grip with the palm of the hand. Do not use the tips of fingers for support.

Always keep the fire as close to the body as possible. This will minimise the

cantilever action.

Use gloves to provide additional grip.

Always use assistance if required.

This product uses fuel effect pieces and burner compartment rear wall containing

Refractory Ceramic Fibres (RCF), which are man-made vitreous silicate fibres.

Excessive exposure to these materials may cause irritation to eyes, skin and

respiratory tract. Consequently, it is important to take care when handling these

articles to ensure that the release of dust is kept to a minimum. To ensure that the

release of fibres from these RCF articles is kept to a minimum, during installation

and servicing we recommend that you use a HEPA filtered vacuum to remove any

dust and soot accumulated in and around the fire before and after working on the

fire. When replacing these articles we recommend that the replaced items are not

broken up, but are sealed within a heavy duty polythene bag, clearly labelled as

RCF waste. RCF waste is classed as a stable, non-reactive hazardous waste and

may be disposed at a landfill licensed to accept such waste. Protective clothing is

not required when handling these articles, but we recommend you follow the

normal hygiene rules of not smoking, eating or drinking in the work area and

always wash your hands before eating or drinking.

This appliance does not contain any component manufactured from asbestos or

asbestos related products.

INSTALLER GUIDE

2. APPLIANCE DATA AND EFFICIENCY

2.1 General information.

* When converted using Kit 0595221

The appliance data label is located on a plate at the base of the fire. This can be

seen by removing the lower trim.

2.2 Efficiency.

The efficiency of this appliance has been measured as specified in BS 7977 - 1 and

the result is as below :

Model Efficiency % (Gross)

752. 51

752 when converted to LPG. 52

The gross calorific value of the fuel has been used for this efficiency calculation. The

test data from which it has been calculated has been certified by Advantica

Certification services (0087). The efficiency value may be used in the UK

Government's Standard Assessment Procedure (SAP) for energy rating of dwellings.

The conversion of net efficiency to gross was achieved by multiplying the net

efficiency by the following conversion factor from Table E3 of SAP 2005, rounding

down to the nearest whole number.

Gas Natural (G20) Propane (G31) *

Inlet Pressure 20mbar 37mbar

Input - Max. (Gross) 6.0kW (20,500Btu/h) 6.1kW (20,800Btu/h)

Input - Min. (Gross) 1.7kW (5,800Btu/h) 3.2kW (10,918Btu/h)

Inlet Test Pressure (Cold) 20.0 ± 1.0mbar

(8.0 ± 0.4in w.g.)

37.0 ± 1.0 mbar

(14.85 ± 0.4in w.g.)

Gas Connection 8mm pipe 8mm pipe

Burner Injector Cat 82 - 069 Size 128

Pilot & Atmosphere Sensing

Device

Copreci Ref. O.D.S

21500/166

Copreci Ref. O.D.S

21500/166 Fitted with RBM

180 - 02 injector

Ignition Piezo Electric. Integral with

Gas Tap

Piezo Electric. Integral with

Gas Tap

Aeration See section 16.1 Non-adjustable

INSTALLER GUIDE

3. GENERAL INSTALLATION REQUIREMENTS

3.1 Regulations, Standards and Law.

The installation must be in accordance with these instructions.

For the user’s protection, in the United Kingdom it is the law that all gas appliances

are installed by competent persons in accordance with the current edition of the Gas

Safety (Installation and Use) Regulations. Failure to install the appliance correctly

could lead to prosecution. GAS SAFE REGISTER and CORGI require their members

to work to recognised standards.

In the United Kingdom the installation must also be in accordance with:

All the relevant parts of local regulations.

All relevant codes of practice.

The relevant parts of the current editions of the following British Standards:-

BS EN 1856 Part 1 - Chimneys - Requirements for metal chimneys.

BS 715 - Specification for metal flue boxes for gas-fired appliances not

exceeding 20kW.

BS EN 1858 - Chimneys - Components - Concrete flue blocks.

BS EN 1806 - Chimneys - Clay / ceramic flue blocks.

BS EN 1856 Part 1 - Chimneys - Requirements for metal chimneys.

BS 5440 Part 1 - Installation of flues.

BS 5440 Part 2 - Installation and maintenance of flues and ventilation for gas

appliances of rated input not exceeding 70 kW net (1st, 2nd

and 3rd family gases).

BS 6461 Part 1 - Masonry chimney & flues - Installation

BS 1251 - Fireplace components

BS 5871 Part 2 - Installation - Inset LFE gas fires

BS 6891 - Gas pipework installation

In England and Wales, the current edition of the Building Regulations issued by the

Department of the Environment and the Welsh Office.

In Scotland, the current edition of the Building Standards (Scotland) Regulations

issued by the Scottish Executive.

In Northern Ireland, the current edition of the Building regulations (Northern

Ireland) issued by the Department of the Environment for Northern Ireland.

In the Republic of Ireland the installation must be carried out by a competent

person and also conform to the relevant parts of:

a) The current edition of IS 813 “Domestic Gas Installations”

b) All relevant national and local rules in force.

Gas Conversion factor from net to gross efficiency

Natural Gas 0.901

LPG 0.921

INSTALLER GUIDE

Where no specific instructions are given, reference should be made to the relevant

British Standard Code of Practice.

3.2 Ventilation requirements.

Normal adventitious ventilation is usually sufficient to satisfy the ventilation

requirements of this appliance. In GB reference should be made to BS 5871 Part 2

and in IE reference should be made to the current edition of IS 813 “Domestic Gas

Installations” which makes clear the conditions that must be met to demonstrate that

sufficient ventilation is available.

3.3 The Atmosphere sensing device (ASD).

The appliance is fitted with an A.S.D (Atmosphere sensing device). If the appliance

closes down after a period of operation for no apparent reason, the consumer should

be informed to stop using the appliance until the installation and appliance have been

thoroughly checked. The A.S.D will shut the appliance down if an unacceptable

amount of harmful products of combustion accumulate. Under no circumstances

should the A.S.D be altered or bypassed in any way. Only a genuine manufacturer’s

replacement part should be fitted. The individual A.S.D components are not

replaceable.

3.4 Fireguard requirements.

A fireguard complying with BS 8423 should be fitted for the protection of young

children, the elderly, the infirm and pet animals.

3.5 Room considerations.

3.5.1 This appliance must not be installed in any room that contains a bath or shower

or where steam is regularly present.

3.5.2 An extractor fan may only be used in the same room as this appliance, or in any

area from which ventilation for the appliance is taken, if it does not affect the safe

performance of the appliance. Note the spillage test requirements detailed further on

in this manual. If the fan is likely to affect the appliance, the appliance must not be

installed unless the fan is permanently disconnected.

3.5.3 Note that soft wall coverings (e.g. embossed vinyl, etc.) are easily affected by

heat. They may scorch or become discoloured when close to a heating appliance.

Please bear this in mind when installing.

3.6 Chimney preparation.

3.6.1 If the appliance is intended to be installed to a chimney that was previously

used for solid fuel, the flue must be swept clean prior to installation. All flues should

be inspected for soundness and freedom from blockages.

INSTALLER GUIDE

Altri manuali per 752

Indice

Altri manuali Valor Fires Camino da interno

Valor Fires

Valor Fires 541 Chic Istruzioni per l’uso

Valor Fires

Valor Fires 348 Brava Manuale di istruzioni

Valor Fires

Valor Fires 347 Brava 4 Oxysafe Manuale di istruzioni

Valor Fires

Valor Fires 954 Istruzioni per l’uso

Valor Fires

Valor Fires Artura 958 Istruzioni per l’uso

Valor Fires

Valor Fires 963 Istruzioni per l’uso

Valor Fires

Valor Fires 953 Istruzioni per l’uso

Valor Fires

Valor Fires 349 Manuale di istruzioni

Valor Fires

Valor Fires 541 Camden Istruzioni per l’uso

Valor Fires

Valor Fires 341 black beauty slimline Manuale di istruzioni

Valor Fires

Valor Fires 752 Istruzioni per l’uso

Valor Fires

Valor Fires 762 Istruzioni per l’uso

Valor Fires

Valor Fires 824 Blenheim Longlite Istruzioni per l’uso

Valor Fires

Valor Fires 756 Istruzioni per l’uso

Valor Fires

Valor Fires 473 Black Beauty Unigas II Manuale di istruzioni

Valor Fires

Valor Fires Artura 958 Istruzioni per l’uso

Valor Fires

Valor Fires 752 Istruzioni per l’uso

Valor Fires

Valor Fires Carlton Manuale utente

Valor Fires

Valor Fires 349 Manuale di istruzioni

Valor Fires

Valor Fires 942 Istruzioni per l’uso

Valor Fires

Valor Fires 961 Homeflame Dream Manuale di istruzioni

Valor Fires

Valor Fires Artura 958 Manuale di istruzioni

Valor Fires

Valor Fires 541 Istruzioni per l’uso

Valor Fires

Valor Fires 844 Istruzioni per l’uso

Manuali Camino da interno popolari di altre marche

Brigantia

Brigantia 35-DVRS31N-2 Manuale del proprietario

Nordpeis

Nordpeis Bergen Manuale utente

Superior

Superior BCT2536TMN Manuale utente

Quadra-Fire

Quadra-Fire 5100I-GD-B Manuale utente

Renaissance

Renaissance RUMFORD 1000 Manuale utente

Lacunza

Lacunza IV-800 Manuale utente

Baxi

Baxi 940 Istruzioni per l’uso

Dru

Dru Maestro 60/2 Tall RCH Manuale utente

Diamond Fireglass

Diamond Fireglass SS-O22 Manuale utente

HearthStone

HearthStone Windsor Bay 8830 Manuale di programmazione

Napoleon

Napoleon ASCENT B42 Manuale utente

Enviro

Enviro E33GI Manuale utente

Smeg

Smeg L30 FABE Istruzioni di montaggio

KEDDY

KEDDY K700 Manuale utente

Godin

Godin 3451 Manuale utente

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Manuale utente

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 Manuale utente

Desa

Desa CCFPDFT Manuale operativo