Varian ProStar 400 Nota di rilascio
Varian, Inc.
2700 Mitchell Drive
Walnut Creek, CA 94598-1675/USA
©Varian, Inc. 2002 03-914947-28:Rev.1
ProStar 400 Autosampler
Control
Galaxie Driver Manual
ProStar 400 Autosampler Control Manual -1- 03-914947-28:R1
Table of Contents
Introduction.............................................................................................. 2
General ........................................................................................................................... 2
Installation and Configuration................................................................ 3
Installing the Driver Software.......................................................................................... 3
Configuring the Communication Server.......................................................................... 6
Configuring the driver.................................................................................................... 13
Creating a New System............................................................................................. 13
Configuring the Varian ProStar 400 Autosampler..................................................... 15
Configuring the Synopsis .......................................................................................... 18
Building a Method.................................................................................. 20
Creating a New Method ................................................................................................ 20
Control Method Section for the Varian Prostar 400...................................................... 23
Injection Control......................................................................................................... 24
Starting and Viewing an Acquisition.................................................... 26
Quick Start and Sequence............................................................................................ 26
Quick Start (Single Acquisition)................................................................................. 26
Sequence .................................................................................................................. 28
Running Acquisition Status........................................................................................... 29
Viewing a Running Acquisition.................................................................................. 29
Varian ProStar 400 Autosampler Status ................................................................... 29
ProStar 400 Autosampler Control Manual -2- 03-914947-28:R1
Introduction
General
This document describes the installation and configuration of the
Varian ProStar 400 Autosampler driver. It also explains how to
build a control method for this driver, how to start and view a
running acquisition, and what actions are available during an
analysis.
ProStar 400 Autosampler Control Manual -3- 03-914947-28:R1
Installation and
Configuration
Installing the Driver Software
The Galaxie software must already be installed before installing
the driver software (refer to the Galaxie User’s Guide).
You must have administrator rights to install the driver. The
Varian drivers must be installed only on the server.
1. When you insert the Galaxie CD into your CD drive, the CD
Browser will start automatically. If it does not, you can launch
the Browser by running Install.exe from the root directory of
the CD.
2. From the CD Browser click on the Install button and then
click on the Drivers for Varian LCs or GCs button.
3. Then click on the Drivers for Varian LCs button.
The following screen will appear:
ProStar 400 Autosampler Control Manual -4- 03-914947-28:R1
4. Click on the Next button, read and accept the License
Agreement,and enter your driver Serial Number in the
corresponding field. The serial number is provided on your
driver serial number card and is different from the Galaxie
serial number.
Note that the serial number is case sensitive.
ProStar 400 Autosampler Control Manual -5- 03-914947-28:R1
Then press the Next button and click on Finish at the end of
the installation.
5. If you want to reinstall or upgrade your drivers, you will need
to run the setup (steps 1, 2 and 3) again.
The following screen will appear:
Then press Next. The drivers will be automatically reinstalled
or upgraded. Click on Finish at the end of the installation to
exit the maintenance mode.
6. To see which drivers are installed, select Tools from the
Galaxie Configuration Manager main menu and select Install
Instrument Control Drivers. The following screen containing
the installed devices appears:
ProStar 400 Autosampler Control Manual -6- 03-914947-28:R1
The button can be used for installing beta
or pre-release drivers. Use this button only when directed by a
technical support representative.
Configuring the Communication Server
Depending on the instrument, different hardware resources can
be used by the drivers to communicate with the chromatographic
system. The following section gives details about the
configuration of the resources used by the ProStar 400
Autosampler module.
Start the Communication Server Configuration program from
the START / PROGRAMS / GALAXIE menu.
The following information screen appears:
ProStar 400 Autosampler Control Manual -7- 03-914947-28:R1
Click on the button and a new
screen appears where the type of hardware used by the
instrument for communication can be configured.
In this screen, all the hardware types previously configured are
listed with their name and the name of their software protocol for
communication.
ProStar 400 Autosampler Control Manual -8- 03-914947-28:R1
Click on to create and configure new hardware.
The following screen appears:
In the list select the Hardware type required by the
chromatographic instrument and a new screen appears.
Following are the available choices:
CEC488 (communication by GPIB)
GPIB_INTERFACE (communication by GPIB)
NI488 (communication by GPIB)
RS232_CP3800 (communication by RS232)
RS232_INTERFACE (communication by RS232)
RS232_PC (communication by RS232)
NOTE: The Varian ProStar 400 Autosampler module uses the RS232 communication
protocol. Only this type of hardware will be detailed in this section.
Select RS232_PC or RS232_INTERFACE in the Hardware type
list. The RS232_PC protocol is used when the instrument is
directly connected to the Com port of the computer and
RS232_INTERFACE when the instrument is connected to a Star
800 MIB. One of the following screens appears depending upon
your choice:
ProStar 400 Autosampler Control Manual -9- 03-914947-28:R1
or
Give a logical name to the card in the Configuration Name field.
NOTE: Once the hardware has been configured, it is no longer possible to change the
Configuration Name.
If the RS232_INTERFACE type has been chosen, you must also
select the Star 800 MIB name to which the system will be
Altri manuali per ProStar 400
1
Indice
Altri manuali Varian Attrezzature da laboratorio
Varian
Varian Cary 5000 Manuale utente
Varian
Varian ProStar 400 Manuale utente
Varian
Varian PROSTAR 210 Manuale utente
Varian
Varian Micro-GC 490-GC Manuale utente
Varian
Varian 920-LC Manuale utente
Varian
Varian Saturn 2000 GC/MS Manuale utente
Varian
Varian 1200 LC/MS Manuale utente
Varian
Varian CP-3800 GC Manuale elenco delle parti
Varian
Varian archon Manuale utente
Varian
Varian 4000 GC Manuale utente
Varian
Varian 900-LC Series Manuale per l'uso e la cura
Varian
Varian ProStar Manuale utente
Varian
Varian ProStar 430 Nota di rilascio
Varian
Varian 4000 GCMS Guida di riferimento
Varian
Varian Saturn 2000 GC/MS Manuale utente
Varian
Varian ProStar 701 Nota di rilascio
Varian
Varian 900-LC Series Manuale elenco delle parti
Varian
Varian 210-MS Manuale utente
Varian
Varian 3900GC Manuale
Varian
Varian 450-GC Manuale utente
Manuali Attrezzature da laboratorio popolari di altre marche
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manuale utente
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manuale utente
NI
NI PXI-5422 Manuale
Collomix
Collomix Aqix Manuale utente
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente
Ocean Insight
Ocean Insight FLAME-NIR+ Manuale utente
