Varytec LED Phantom Manuale utente
User’s manual
LED Phantom
2 / 7
Table of content
1. Safety instructions........................................................................................................................... 3
2. Introduction..................................................................................................................................... 4
3. Product Overview............................................................................................................................ 4
4. Setup............................................................................................................................................... 4
4.1. Fuse Replacement................................................................................................................. 4
4.2. Mounting................................................................................................................................. 5
5. Operating Instructions..................................................................................................................... 5
5.1. Operation modes.................................................................................................................... 5
5.2. Technical data........................................................................................................................ 6
3 / 7
1. Safety instructions
FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and extreme temperatureAvoid exposing it
to direct rays of the sun or near a heating appliance.
Not put it in a temperature bellow 41°F /5°C, or exceeding 95°F /35°C.
Keep away from humidity, water and dust
Do not place the set in a location with high humidity or lots of dust.
Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
To avoid placing on un-stable location
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing,
do not open the cabinet by yourself, it might result a
danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure
to hold the plug. When not using the player for an extended period of time
be sure to disconnect the plug from the receptacle.
4 / 7
2. Introduction
- Simulated rippling water effect
- 4 constantly changing dichroic colors
- Stop effect on a color
- Adjustable ripple speed
- High-power, 22W (1,360mA) LED
- Additional power output: max 100 units @ 240V
3. Product Overview
4. Setup
4.1. Fuse Replacement
Disconnect the power cord before replacing a fuse and always replace with the
same type of fuse.
With a flat head screwdriver, wedge the fuse holder out of its housing. Remove the blown fuse from its
holder and replace with the exact same type of fuse. Insert the fuse holder back in its place and
reconnect power.
5 / 7
4.2. Mounting
This fixture may be mounted in any safe position.
It is important never to obstruct the fan or vents pathway. Mount the fixture using, a suitable “C” or “O”
type clamp. Adjust the angle of the fixture by loosening both knobs and tilting the fixture. After finding
the desired position, retighten both knobs.
- When selecting an installation location, consider ease of access to the unit for operation and
routine maintenance.
- Always use safety cables.
- Never mount the unit in places where it may be exposed to rain, high humidity, extreme
temperature changes or restricted ventilation.
5. Operating Instructions
5.1. Operation modes
The unit operates in standalone mode. There is an on/off switch for the color rotation, as well as a
rotation speed adjustment for the water effect
Note! The on/off switch is only for color rotation. It will not turn the off the fixture.
Note! At higher rotation speeds, the operation noise may increase from the fixture. This is
normal.
6 / 7
5.2. Technical data
7 / 7
Importeur:
B & K Braun GmbH
Industriestraße 1
D-76307 Karlsbad
www.bkbraun.com
Indice
Altri manuali Varytec Attrezzatura per DJ
Varytec
Varytec LED Pad 7 Manuale utente
Varytec
Varytec BAT.BAR 240 RGB Manuale utente
Varytec
Varytec Typhoon True Kid 720Z RGBW IP65 Manuale utente
Varytec
Varytec LED PAR 64 Manuale utente
Varytec
Varytec Gigabar III Manuale utente
Varytec
Varytec LED Derby ST Manuale utente
Varytec
Varytec QUAD VISOR FX Manuale utente
Varytec
Varytec BEAM R5 Manuale utente
Varytec
Varytec MULTIEYES Manuale utente
Varytec
Varytec Typhoon True Kid 720Z RGBW Manuale utente
Varytec
Varytec Hero Spot Wash 80 Manuale utente
Varytec
Varytec Giga Bar HEX 3 Manuale utente
Varytec
Varytec LED Giga Bar 4 MKII Manuale utente
Varytec
Varytec 92043 Manuale utente
Varytec
Varytec LED Accu Pad 7 Manuale utente
Varytec
Varytec LED Pad 7 Manuale utente
Varytec
Varytec ARC One Manuale utente
Varytec
Varytec LED Accu Street Bar Manuale utente
Varytec
Varytec LED AccuWash MKII 12x8W RGBW IP65 Manuale utente
Varytec
Varytec LA VIDA Manuale utente
