VECTORMAX A12E Manuale utente
Operating Manual
A12E
4K IPTV Set Top Box
Table of Contents
Quick Setup Guide…………………………….. Page 1
Specifications…………………………………...Page 2
Safety Information……………………………...Page 3
General Information……………………………Page 5
Packing Details………………………………… Page 6
Rear Panel………………………………………. Page 6
Connection Overview………………………….Page 7
Remote Control………………………………… Page 8
Connect to TV with AV Cable………………...Page 9
Connect to TV with HDMI Cable…………….. Page 10
Warranty………………………………………….Page 11
Noxious Substance…………………………….Page 18
Quick Setup Guide
1
1. Connect A12E to TV
Use the included AV or HDMI cable.
2. Connect A12E to Power
Plug included power adapter into A12E and wall AC electric receptacle.
3. Connect A12E to Network
Use an Ethernet cable or configure Wi-Fi (See step 4).
4. For Wi-Fi Only
Select Wi-Fi settings.
Select preferred Wi-Fi network.
Provide password (if required) for the selected Wi-Fi network.
(Some Wi-Fi networks may require a user name & password).
5. Watch TV on the A12E
From “Home” screen, select shortcut for IPTV player application.
A12E will start on the last channel watched.
Specifications
2
Safety Information (1)
3
Do not place A12E, remote
controller or batteries in direct
sunlight, near exposed flame, or
other heat source.
The A12E should not be placed
near liquid or objects filled with
liquid.
To prevent electric shock, do not
open the A12E enclosure. Refer
servicing to qualified personnel.
Do not block ventilation holes of
the A12E, to permit proper air
circulation.
Safety Information (2)
4
Do not touch the A12E during a
lightning storm, which may
create electric-shock hazards.
Unplug A12E power immediately
if any unexpected behavior.
(smoking, sound, smell, etc.).
FCC STATEMENT
1.This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation.
General Information
5
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. In order to avoid the possibility of exceeding
the FCC radio frequency exposure limits, human proximity to the antenna
shall not be less than 20cm(8 inches) during normal operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Packing Details
Rear Panel
6
Connection Overview
7
Remote Control
8
Indice
Altri manuali VECTORMAX Decoder
