VEGA POWER POWER CELL Manuale utente
PRODUCT BY
INDICATORS
COMPONENTS
POWER CELL
DEVICE (FRONT)
DEVICE SETTINGS
SETTING UP DEVICE
07
08
09
10
DEVICE (RIGHT) 11
DEVICE (LEFT) 12
13
15
14
For safety reasons, installers are responsible for familiarizing themselves with
the contents of this manual and all warnings before performing installation.
Observe the following precautions:
– Do not subject the battery pack to strong impacts.
– Do not crush or puncture the battery pack.
– Do not dispose of the battery pack in a fire.
– Do not expose the battery pack to temperatures in excess of 60°C.
– Do not place the battery pack near a heat source, such as a fireplace.
– Do not expose the battery pack to direct sunlight.
– Do not allow the battery connectors to touch conductive objects such as
wires.
Safety instructions
General safety precautions
Risks of explosion
Risks of fire
Failure to observe the precautions described in this section can cause serious
injury to persons or damage to property
POWER CELL
– Do not disassemble the battery pack.
– Do not touch the battery pack with wet hands.
– Do not expose the battery pack to moisture or liquids.
– Keep the battery pack away from children and animals.
Risks of electric shock
– Do not allow the battery pack to come in contact with liquids.
– Do not subject the battery pack to high pressures.
– Do not place any objects on top of the battery pack .
• Use the battery pack only as directed.
• Do not use the battery pack if it is defective, appears cracked, broken or
otherwise damaged, or fails to operate.
• Do not attempt to open, disassemble, repair, tamper with, or modify the
battery pack. The battery pack is not user serviceable.
• To protect the battery pack and its components from damage when transporting,
handle with care.
• Do not impact, pull, drag or step on the battery pack. Do not subject it to
any strong force.
• Do not insert foreign objects into any part of the battery pack.
• Do not use cleaning solvents to clean the battery pack.
Risks of damage to the battery pack
Battery handling guide
!
POWER CELL
Response to emergency situations
Leaking batteries
The POWER CELL comprises multiple batteries that are designed to prevent hazards
resulting from failures. However, VEGA POWER cannot guarantee their absolute safety.
If the battery pack leaks electrolyte, avoid contact with the leaking liquid
or gas. Electrolyte is corrosive and contact may cause skin irritation and
chemical burns.
If one is exposed to the leaked substance, do these actions:
Inhalation
Evacuate the contaminated
area, and seek medical
attention immediately.
Ingestion
Induce vomiting, and seek
medical attention immediately
Eye contact
Skincontact
Rinse eyes with flowing
water for 15 minutes, and
seek medical attention
immediately.
Wash the affected area
thoroughly with soap and
water, and seek medical
attention immediately.
POWER CELL
The battery pack may catch fire when heated above 150°C.
If the battery catches fire, it will produce noxious and poisonous gases.
Do not approach.
Fire
In case there is a fire, always have an ABC or carbon dioxide extinguisher
If a fire breaks out where the battery pack is installed, do these actions:
1. Extinguish the fire before the battery pack catches fire.
2. If it is impossible to extinguish the fire but you have time, move the battery pack
to a safe area before it catches fire.
3. If the battery pack has caught fire, do not try to extinguish the fire. Evacuate people
immediately
POWER CELL
Damaged batteries may leak electrolyte or produce flammable gas. If you suspect such
damage, immediately contact VEGA POWER for advice and information.
Wet batteries
Qualified installers
Damaged batteries
If the battery pack is wet or submerged in water, do not try to access it.
Contact VEGA POWER or your distributor for technical assistance.
Damaged batteries are dangerous and must be handled with extreme caution.
They are not fit for use and may pose a danger to people or property.
If the battery pack seems to be damaged, pack it in its original container, and
then return it to VEGA POWER or your distributor.
This manual and the tasks and procedures described herein are intended for
use by skilled workers only. A skilled worker is defined as a trained and qualified electrician
or installer who has all of the following skills and experience:
• Knowledge of the functional principles and operation of on-grid systems.
• Knowledge of the dangers and risks associated with installing and using
electrical devices and acceptable mitigation methods.
• Knowledge of the installation of electrical devices
• Knowledge of and adherence to this manual and all safety precautions and
best practices.
POWER CELL
Nominal voltage
Nominal Capacity (Ah)
Nominal Power (Wh)
Dimension (mm)
Weight (Kg)
Discharge Cut-off Voltage (V)
Charge Voltage (V)
Max. Charge/Discharge Current (A)
Communication Interface
Configuration
Working Temperature
Cell chemistry
Cycle life
IP level
51.2V
100Ah
5KWh
573*392*174mm
55KG
42V
55V
100A
CAN,RS485
16S1P
0〜50℃(Charge)
-20〜50℃(Discharge)
-20〜55℃(Storage)
Lithium iron phosphate (LiFePO4)
≥80% capacity state after 4800cycles at
0.5C, 250C, 100% DOD
IP 54
BASIC PARAMETERS
SPECIFICATIONS
POWER CELL
Status
Capacity
indicator
0-25%
25%-50%
50%-75%
>75%
Operating
indicatort
Discharge Charge
L4 L3 L2 L1
L4 L3 L2 L1
OFF OFF OFF Solid Green
OFF OFF Solid GreenSolid Green
OFF Solid GreenSolid GreenSolid Green
Solid GreenSolid Green
Solid Green Blink
Solid GreenSolid Green
OFF OFF Solid Green
OFF Solid GreenSolid Green
Solid GreenSolid GreenSolid Green
OFF OFF OFF Blink
Blink
Blink
Blink
INDICATORS
POWER CELL
Power Cell Installation manual Power Cell wire
Battery Mount Wall Mount Anchor Bolts
Lugs
POWER CELL
COMPONENTS
Indice
Altri manuali VEGA POWER Pacco batterie
