Velleman CCTVPROM16 Manuale utente

CCTVPROM16

CCTV PACK – H.264 FULL FRAME DVR - 4 IR CAMERAS – 500 GB HARD DISK

CCTV-PACK – H.264 FULL FRAME DVR - 4 IR-CAMERA'S - HARDE SCHIJF 500GB

PACK VIDEOSURVEILLANCE – DVR H.264 PLEIN ÉCRAN - 4 CAMÉRAS IR - DISQUE

DUR 500GO

JUEGO DE VIGILANCIA - H.264 VIDEOGRABADORA FULL FRAME - 4 CÁMARAS IR -

DISCO DURO 500GB

CCTV-PACK - H.264 FULL FRAME VIDEORECORDER - 4 IR-KAMERAS - FESTPLATTE

500GB

CONJUNTO CCTV - H.264 FULL FRAME DVR - 4 CÂMARAS IR – DISCO RIGIDO

500GB

ZESTAW MONITORINGOWY- H.264 FULL FRAME DVR - 4 KAMERY IR - HD 500GB

QUICK INSTALLATION GUIDE 3

BEKNOPTE INSTALLATIEHANDLEIDING 11

GUIDE D'INSTALLATION RAPIDE 19

GUÍA RÁPIDA 27

SCHNELLEINSTIEG 35

GUIA RÁPIDO PARA INSTALAÇÃO 43

SKRÓCONA INSTRUKCJA INSTALACJI 51

CCTVPROM16

V. 02 – 21/08/2013 2 ©Velleman nv

DC 12V input terminal

Video output connector

DC 12V ingangsaansluiting

Video-uitgangsaansluiting

Connexion d’entrée CC 12V

Connexion de sortie vidéo

DC 12V-Eingangsanschluss

Video-Ausgangsanschluss

ES 1 Conexión de entrada CC 12V PT 1 Terminal de entrada DC 12V

1 Wejście zasilania DC 12 V

2 Conexión de salida de vídeo

2 Conector de saída de vídeo

2 Złącze wyjściowe wideo

CCTVPROM16

V. 02 – 21/08/2013 3 ©Velleman nv

QUICK INSTALLATION GUIDE

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could

harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should

be taken to a specialized company for recycling. This device should be returned to your distributor or to

a local recycling service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If

the device was damaged in transit, don't install or use it and contact your dealer.

Notes

•This document is a quick installation guide. For more detailed information, refer to the full user manual on

the included CD-ROM.

•Product images are for illustrative purposes only. Due to constant product improvements, the actual

product may differ from the images.

Package content:

•1 x DVR with built-in SATA connection: DVR4H3

•4 x IR colour cameras: CAMCOLBUL29

•4 x 20 m camera cables

•1 x 19 V power supply

•1 x high-efficiency DC-DC converter for DVR and cameras

•hard disk (built in): HD500GB/S

•remote control: DVRRC4

2. Safety Instructions

Keep the device away from children and unauthorised users.

Risk of electroshock when opening the cover. Touching live wires can cause life-threatening

electroshocks.

Always disconnect mains power when the device is not in use or when servicing or maintenance

activities are performed. Handle the power cord by the plug only.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

Indoor use only

Keep this device away form rain, moisture, splashing and dripping liquids. Never put object

filled with liquid on top.

Keep this device away from dust.

Keep this device away from extreme heat. Make sure the ventilation openings are clear at

all times. For sufficient air circulation, leave at least 1” (±2.5 cm) in front of the openings.

Protect this device from shocks and abuse. Avoid brute force when operating the device.

•Familiarise yourself with the functions of the device before actually using it.

•All modifications of the device are forbidden for safety reasons.

•Only use the device for its intended purpose. Using the device in an unauthorised way will void the

warranty.

CCTVPROM16

V. 02 – 21/08/2013 4 ©Velleman nv

•Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the

dealer will not accept responsibility for any ensuing defects or problems.

•Do not use this product to violate privacy laws or perform other illegal activities.

4. Overview

Refer to the illustrations on page 2of this manual.

Front panel

LED indications

HDD reading or recording activities on the hard disk

ALARM

an alarm was triggered

TIMER timed recording is enabled

PLAY

the DVR is in playing mode

POWER DVR power is on

NAVIGATE

Press one of the four positions on the navigate button to move the cursor up

(), down ( ), left ( ) or right ( ).

In play-back mode, press the buttons to play/pause ( ), stop ( ), fast

rewind ( ) or fast forward ( ) the play-back file.

In setting mode, press the up ( ) or down ( ) button to change the

setting in the menu.

Press to enter the main menu.

ENTER Press to confirm settings

LIST

List the information of the recorded files.

QUICK SEARCH / RECORD / MOTION / ALARM / TIMER / FULL LIST

PLAY

Press to play the recorded video.

SLOW

In playback mode, press to play the recorded file slowly.

ZOOM

In live or playback mode, press to enlarge the image of the selected channel.

SEQ Press to show all screens sequentially in full screen mode. Press again to quit.

4CH: Press to show the 4 channel display mode.

1 ~ 4

Press a button to select the corresponding channel.

Enter time search mode. Set time range and press START to see all recordings within the time

range.

AUDIO

= SLOW + ZOOM

Press SLOW and ZOOM simultaneous to select live or play-back sounds.

PTZ

(pan tilt zoom) = SLOW +

Press SLOW and simultaneous to enter or exit PTZ control mode.

USB port

(2x)

Connect a USB flash drive for video backup to one USB port; connect a USB mouse to the

other.

Note: do not connect two USB flash drives or USB mice at the same time.

Rear panel

LAN port Connect the DVR to a local network by plugging a network cable into this port.

VGA

connector for video monitor (monitor not included)

AUDIO IN

4 audio input channels to connect four external audio sources e.g. from cameras with audio.

AUDIO OUT

1 audio output to connect to an audio device, e.g. a speaker (mono).

VIDEO IN

4 video input channels to connect 4 external video sources e.g. cameras.

VIDEO OUT 1 video output channel to connect the DVR to the main monitor.

EXTERNAL I/O

use a 9 pin DSUB connector to connect external signals, for example alarm, PTZ…

CCTVPROM16

V. 02 – 21/08/2013 5 ©Velleman nv

power switch

19V DC

power supply input

5. Hardware setup

Installing the hard disk drive (HDD)

The DVR has a built-in hard disk. To install another hard disk, proceed as follows:

1. Obtain a suitable HDD (see Technical Specifications below), type SATA. The HDD must be formatted.

2. Unplug the device from the mains before servicing and do not touch any electronic circuitry to avoid

electrostatic discharge.

3. Unscrew the 6 screws (1 on either side and 4 on the back) that hold the cover in place.

4. Lift the cover (back first).

5. Remove the hard disk.

6. Screw the mounting brackets on the new hard disk (screws included).

The PCB must be facing upwards when mounting the HDD into the DVR.

7. Connect the SATA data cable and power supply to the HDD.

8. Screw the HDD on the bottom of the DVR housing PCB facing upwards using the included screws.

9. Close the cover (front first) and secure it with the 6 screws.

Connecting a video monitor

•Obtain a suitable monitor (not included) and connect it to the BNC or VGA video output port on the back of

the DVR.

Connecting the power supply

1. Plug the DC output connector of the included power adaptor into the 19VDC power input at the back of

the DVR.

WARNING: only use the included adaptor.

2. Plug the included power cable into the adaptor input connector and plug the other end into the mains.

Do not switch the DVR on yet.

Connecting a camera

1. The CCVT pack comes with 4 cameras. Each camera needs its own power supply.

2. Connect the video output of the camera to either video input at the back of the DVR. The number next to

the input connectors represents the channel number. Connector type is BNC.

Connecting audio

1. The DVR supports four audio inputs. Connect the audio output of an audio source to an audio input of the

DVR. Make sure to connect the audio channel to the corresponding video channel. Connector type is BNC.

2. There is also an audio output connector. Connect an audio device e.g. a speaker to this connector when

desired. Connector type is BNC.

Connecting Local Area Network (LAN)

•Connect the DVR to a local network by plugging a network cable into the LAN port at the back of the DVR.

Connector type is 8P8C (RJ45). Setup is done through the OSD.

6. Preliminary settings

Make sure the connected cameras are on and set the power switch at the rear of the device to the ON position.

It takes about 15 to 30 seconds to start up.

Menu overview

Press the MENU button and enter the password to go into the menu list.

Note: default admin password is “0000” (4 times zero).

CCTVPROM16

V. 02 – 21/08/2013 6 ©Velleman nv

QUICK START

GENERAL - TIME SETUP

DATE SETUP

DATE INFO - DAYLIGHT

SYSTEM

TOOLS - SYSTEM INFO – BACKUP DATA – BACKUP LOG

EVENT

INFORMATION

QUICK SEARCH - EVENT SEARCH - HDD INFO - EVENT LOG

ADVANCED

CONFIG

CAMERA – DETECTION – ALERT – NETWORK – DISPLAY – RECORD - REMOTE

SCHEDULE

SETTING RECORD – DETECTION – ALARM

For more detailed information, refer to the full user manual on the included CD-ROM.

Setting date and time

Before using the DVR the time and date should be set to get a valid time stamp.

1. Press the MENU button and enter the admin password to go into the menu list.

2. Select the QUICK START menu item.

3. Use the NAVIGATION button to move to the TIME SETUP menu item. Select it to set date and time.

Note: once recording started, do not change date or time as this will make it very difficult to find back the

recorded files.

Note: when using the DVR for the first time and the correct time is set, leave it on for at least 48 hours.

Password setting

1. Press the MENU button and enter the password to go into the menu list.

2. Select the SYSTEM menu item.

3. Go to TOOLS. Select ADMIN PASSWORD (or OPERATOR PASSWORD) and press the ENTER button to set the

password.

Note: an operator can not access the main menu, only the quick menu bar (see below).

4. Press the cursor up ( ) or down ( ) button to select the value of the first number and press enter to

save and go to the next character, or use the mouse to select the desired value. Repeat this for all four

password numbers.

Note: default admin password is “0000” (4 times zero).

Record settings

1. Press the MENU button and enter the password to go into the menu list.

2. Select the QUICK START menu item.

3. Select the GENERAL menu item using the NAVIGATION button.

4. Set the image size, image quality and images per second for recording.

5. Refer to the full user manual on the included CD-ROM for more details.

CCTVPROM16

V. 02 – 21/08/2013 7 ©Velleman nv

Audio playback

Press the SLOW and ZOOM button simultaneously to select the desired audio channel or use the quick menu

bar (see below). The current audio channel is indicated in the status bar.

Switch users

1. The DVR can be accessed as administrator ( ) or operator ( ), icons are indicated in the status bar.

2. To switch between users, click on the user icon ( or ) to lock the current session ( ).

3. Press on the key lock icon ( ) than enter the password of the desired profile.

7. Operation

7.1 Display

The following image shows the screen layout.

A system date and time

general system status

C available HDD capacity

channel status

live audio channel 1 .. 4 enabled playback audio channel 1 .. 4 enabled (yellow)

audio channel disabled timer recording

digital zoom on (yellow) / off USB mouse connected

LAN connected / Internet connected / no network connection

USB flash drive connected Hard disk overwrite (default)

key lock on PTZ mode

sequence mode motion mode

recording mode

alarm mode

administrator logged on operator logged on

Note that actual screen icons might differ slightly from the ones shown above.

7.2 Quick menu bar

Note: only available when USB mouse is connected.

Move the pointer towards the left of the monitor to open the quick menu bar:

CCTVPROM16

V. 02 – 21/08/2013 8 ©Velleman nv

Open channel switch panel.

Show playback control panel.

Zoom-in mode (select desired channel first before entering zoom-mode).

Select audio channel (live mode only live channels can be selected).

Enter PTZ mode and show PTZ control panel

Click to show the power off panel to either halt or reboot the system.

7.3 Recording

•Check whether the camera(s) is (are) properly connected and a HDD is present inside the device.

•When the auto-recording and pre-alarm functions are enabled, the device will start recording images.

•Default the recording icon ( ) is shown.

•In case the motion or alarm detection is activated and a motion or alarm is detected, the motion ( ) resp.

alarm ( ) icon is shown.

•When timed recording is enabled, the timed recording icon ( ) is shown and the timed recording LED

is on.

•Default, the device is in HDD overwrite mode and the icon ( ) is shown.

7.4 Play-back

Make sure the control panel is not locked and press the PLAY button on the control panel or use the quick menu

bar to open the playback control panel:

progress bar

information

playback control

event search

set repeat function A→B / open backup menu

Note: play-back needs at least 8192 recorded images to work properly (e.g. with IPS=30, the recording must

be at least 273 seconds long).

•The fast forward ( ) and fast rewind ( ) buttons will increase resp. decrease the play-back speed.

Repeatedly pressing the button will increase/decrease speed to 4x, 8x 16x or 32x (max.).

•Press the pause button () to temporary suspend video play-back.

•Press the stop button () to return to live monitoring.

•Press the SLOW button once to set play-back speed to 1/4th and twice for 1/8th.

7.5 Search

•There are four ways to search recorded files: by record list, motion list, alarm list or by timer list.

•To search an event, press the LIST button on the front panel (make sure the control panel is not locked).

An overview of the recorded file types (ALARM, MANUAL, MOTION, SYSTEM and FULL LIST) is shown.

•Select the desired list and recording from the list.

CCTVPROM16

V. 02 – 21/08/2013 9 ©Velleman nv

•Press ENTER to start play-back.

8. Technical Specifications

video format PAL

video compression

H.264

video input

4 channels, composite video signal 1 Vpp / 75 ohm BNC

video output composite video signal 1 Vpp / 75 ohm BNC + VGA

maximum recording rate (PAL)

- frame: 704 x 576 pixels with 100 IPS (PAL)

- CIF: -

image quality setting super best - best - high - normal

hard disk storage

built-in SATA type, support 1 x HDD, support HDD capacity over 2 TB (500 GB

hard disk included)

recording mode

manual / timer / motion / network / alarm controlled

refresh rate

100 IPS for PAL

multiplex operation

live display, record, playback, backup and network

audio I/O 4x audio in, 1x audio out (mono)

motion detection area

16 x 12 grids per channel

motion detection sensitivity high - normal - low

pre-alarm recording

8 MB

backup device USB 2.0 flash drive (for backup and firmware updates)

Central Management System

remote surveillance to monitor up to 10 different IP addresses (Windows &

Mac OS)

web transmitting / compression

format

H.264

Ethernet 10/100BASE-T, supports remote control and LiveView via Ethernet

mobile surveillance

Smartphones:

EagleEyes software: remote login via all smartphone platforms

(Apple, Android, BlackBerry, Nokia Symbian and Windows Mobile)

computer:

- video viewer software on Windows and Mac

web browser: Internet Explorer, Firefox, Google Chrome and Safari via Java,

Quicktime or VLC plug-in

network connection supports TCP/IP, PPPoE, DHCP and DDNS function

IR remote control

remote control DVR and PTZ (DVRRC4)

PTZ control

yes (via RS-485)

alarm I/O

4 in / 1 out

digital zoom

2x (live & playback)

key lock

yes

video loss detection

yes

camera title up to 6 characters

video adjustments

hue / colour / contrast / brightness

date display format

YY/MM/DD, DD/MM/YY, MM/DD/YY, and off

power source

19 VDC

power consumption < 42 W

daylight saving

yes

operating temperature

10-40 °C (50-104 °F)

system recovery system auto recovery after power reconnected

dimensions

343 x 59 x 223 mm

IR camera

pick-up element

1/3" colour CCD image sensor

number of pixels 712 (H) x 582 (V) - PAL -

resolution

420 TV lines

CCTVPROM16

min. illumination

0.05 lux (F2.0); 0 lux (IR on)

IR LEDs

range (IR light)

15 m

S/N ratio

> 48 dB (AGC off)

water resistance IP67

electronic shutter

1/50 to 1/100 000 s

lens angle

92.6°

white balance

automatic

AGC yes

standard board lens

f3.6mm / F2.0

video output

1.0 Vpp composite, 75 ohm

power supply DC 12 V ± 10 %

current consumption

70 mA (IR off), 200 mA (IR on)

dimensions Ø 60 x 91 mm

weight

250 g (including bracket)

Use this device with original accessories only. Velleman nv cannot be held responsible in the event

of damage or injury resulting from (incorrect) use of this device.

For more info concerning this product and the latest version of this manual, please visit our website

www.velleman.eu.

The information in this manual is subject to change without prior notice.

The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this

manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the

prior written consent of the copyright holder.

Indice

Lingue:

Altri manuali Velleman Sistema di sicurezza

Velleman

Velleman CAMSET2 Manuale utente

Velleman

Velleman HAA80 Manuale utente

Velleman

Velleman DWH Series Manuale di servizio

Velleman

Velleman ISPROM1 Manuale utente

Velleman

Velleman HAM10N Manuale utente

Velleman

Velleman CAMSET31 Manuale utente

Velleman

Velleman CCTVPROM7 Manuale utente

Velleman

Velleman HAM202 Manuale utente

Velleman

Velleman MA620B Manuale utente

Velleman

Velleman PEM7D Manuale utente

Velleman

Velleman SP50 SIMPLE CYCLE GUARD Manuale utente

Velleman

Velleman CCTVPROM6 Manuale utente

Velleman

Velleman HAM211 Manuale utente

Velleman

Velleman CAMZWEXT3N Manuale utente

Velleman

Velleman CAMSET13 Manuale utente

Velleman

Velleman K8093 Manuale utente

Velleman

Velleman CAMSET10 Manuale utente

Velleman

Velleman Camcolbul12 Manuale utente

Velleman

Velleman Velleman Manuale utente

Velleman

Velleman HAMPAG Manuale utente

Velleman

Velleman HAM202 Manuale utente

Velleman

Velleman CCTVPROM8 Manuale utente

Velleman

Velleman HAM263D Manuale utente

Velleman

Velleman CAMSETW2 Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente