Velleman CCTVPROM17 Manuale utente

CCTVPROM17

CCTV PACK –DVR –4 IR CAMERAS –500 GB HARD DISK

CCTV-PACK –DVR –4 IR-CAMERA'S –HARDE SCHIJF 500 GB

PACK VIDEOSURVEILLANCE –DVR –4 CAMÉRAS IR –DISQUE DUR 500 GO

JUEGO DE VIGILANCIA –DVR –4 CÁMARAS IR –DISCO DURO 500 GB

CCTV-PACK –VIDEORECORDER –4 IR-KAMERAS –FESTPLATTE 500 GB

CONJUNTO CCTV DVR –4 CÂMARAS IR –DISCO RIGIDO 500 GB

ZESTAW MONITORINGOWY DVR –4 KAMERY IR –HD 500 GB

QUICK INSTALLATION GUIDE 3

KORTE HANDLEIDING 11

GUIDE D'INSTALLATION RAPIDE 19

GUÍA RÁPIDA 28

SCHNELLEINSTIEG 36

GUIA RÁPIDO PARA INSTALAÇÃO 45

SKRÓCONA INSTRUKCJA INSTALACJI 54

CCTVPROM17

V. 03 –05/05/2014 2 ©Velleman nv

12 VDC input terminal

Video output connector

12VDC-ingangsaansluiting

Video-uitgangsaansluiting

Connexion d’entrée 12 VCC

Connexion de sortie vidéo

12VDC-Eingangsanschluss

Video-Ausgangsanschluss

Conexión de entrada 12 VCC

Terminal de entrada 12 VDC

Wejście zasilania 12 VDC

Conexión de salida de vídeo

Conector de saída de vídeo

Złącze wyjściowe wideo

CCTVPROM17

V. 03 –05/05/2014 3 ©Velleman nv

QUICK INSTALLATION GUIDE

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the

environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized

company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the

local environmental rules. If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the device

was damaged in transit, don't install or use it and contact your dealer.

Notes

This document is a Quick installation guide. For more detailed information, refer to the full user manual on the included

CD-ROM.

Product images are for illustrative purposes only. Due to constant product improvements the actual product may differ

from the images.

Package content

1 x DVR with built-in SATA connection: DVR8H2

4 x varifocal IR colour cameras: CAMCOLBUL30

4 x 20 m camera cables

1 x 19 V power supply

1 x high-efficiency DC-DC converter for DVR and cameras

hard disk (built in): HD500GB/S

remote control: DVRRC4.

2. Safety Instructions

Keep the device away from children and unauthorised users.

Risk of electroshock when opening the cover. Touching live wires can cause life-threatening electroshocks. Have

the device repaired by qualified personnel.

Always disconnect mains power when device not in use or when servicing or maintenance activities are performed.

Handle the power cord by the plug only.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

Indoor use only. Keep this device away from rain, moisture, splashing and dripping liquids. Never put objects

filled with liquids on top of or close to the device.

Keep this device away from dust and extreme temperatures. Make sure the ventilation openings are clear at all

times. For sufficient air circulation, leave at least 1" (± 2.5 cm) in front of the openings.

Protect this device from shocks and abuse. Avoid brute force when operating the device.

Familiarise yourself with the functions of the device before actually using it.

All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not

covered by the warranty.

Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.

Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not

accept responsibility for any ensuing defects or problems.

Keep this manual for future reference.

DO NOT use this product to violate privacy laws or perform other illegal activities.

4. Overview

Refer to the illustrations on page 2 of this manual.

Front panel

LED

indicators

HDD is reading or recording.

DVR is powered on.

NAVIGATE

Press one of the four positions on the navigate button to move the cursor up ( ), down

( ), left ( ) or right ( ).

In playback mode, press the buttons to play/pause ( ), stop ( ), fast rewind ( ) or

fast forward ( ).

In setting mode, press the up ( ) or down ( ) button to change the setting in the menu.

Press MENU to enter the main menu.

ENTER

Press ENTER to confirm the setting.

LIST

Press to quickly search the recorded files by event lists: RECORD / MOTION / ALARM / TIME, or select FULL to

show all the event logs.

To quickly search the time you want, select QUICK SEARCH. For more details, refer to the full user manual.

PLAY

Press to play the recorded video.

CCTVPROM17

V. 03 –05/05/2014 4 ©Velleman nv

Front panel

SLOW

In playback mode, press to play the recorded file slowly.

ZOOM

In live or playback mode, press to enlarge the image of the selected channel.

SEQ

Press to show all screens sequentially in full screen mode. Press again to quit.

Press to show the multiple channel display mode.

1–8

Press a button to select the corresponding channel.

AUDIO

= SLOW + ZOOM

Press SLOW and ZOOM simultaneously to select live or playback audio.

P.T.Z.

= SEQ. +

Press SEQ. and simultaneously to enter or exit PTZ control mode.

USB port

(2x)

Connect a USB flash drive for video backup to the left USB port ( ); connect a USB mouse to the right port

().

Note: Do not connect two USB mice or two USB flash drives simultaneously.

Note: For a list of compatible USB flash drives, please refer to the appendices in the full user manual.

Rear panel

VIDEO IN

8 video input channels to connect 8 external video sources e.g. cameras

MONITOR

1 video output channel to connect the DVR to the main monitor (composite)

Note: You can use the MONITOR, HDMI, and VGA output ports simultaneously.

CALL

connector for monitor specific for sequence display

AUDIO IN

4 audio input channels to connect four external audio sources, e.g. from cameras with audio

AUDIO OUT

1 audio output to connect to an audio device, e.g. a speaker (mono)

LAN port

Connect the DVR to a local network by plugging a network cable into this port.

HDMI

Connect to the HDMI port of a monitor that supports HDMI video output.

Note: You can use the MONITOR, HDMI, and VGA output ports simultaneously.

VGA

Connect to the VGA port of a monitor that supports HDMI video output.

Note: You can use the MONITOR, HDMI, and VGA output ports simultaneously.

External I/O

Connect external devices such as a siren, or an alarm sensor for event notifications to your smart phone

(push video). The push video alarm input corresponds with video input 1.

DC 19V

power supply input

power switch

5. Hardware Setup

Connecting a Video Monitor

Obtain a suitable monitor (not included) and connect it to the MONITOR, HDMI, or VGA video output port on the back of the

DVR.

Note: You can use the MONITOR, HDMI, and VGA output ports simultaneously.

Connecting the Power Supply

1. Plug the DC output connector of the included power adaptor into the 19 VDC power input at the back of the DVR.

Caution: Only use the included adaptor.

2. Plug the included power cable into the adaptor input connector and plug the other end into the mains. Do not switch the

DVR on yet.

Connecting a Camera

1. Obtain up to 8 suitable cameras (not included). Each camera needs its own power supply.

2. Connect the video output of the camera to either video input at the back of the DVR. The number next to the input

connectors represents the channel number. Connector type is BNC.

Connecting Audio

1. The DVR supports four audio inputs. Connect the audio output of an audio source to an audio input of the DVR. Make sure

to connect the audio channel to the corresponding video channel. Connector type is BNC.

2. There is also an audio output connector. Connect an audio device, e.g. a speaker, to this connector when desired.

Connector type is BNC.

Connecting Local Area Network (LAN)

Connect the DVR to a local network by plugging a network cable into the LAN port at the back of the DVR. Connector type is

8P8C (RJ45). Setup is done through the OSD.

Connecting a USB Mouse

Connect a USB mouse to the right USB input port ( ) of the front panel.

CCTVPROM17

V. 03 –05/05/2014 5 ©Velleman nv

6. Preliminary Settings

Make sure the connected cameras are on and set the power switch at the rear of the device to the on position. The device

takes about 15 to 30 seconds to start up.

Menu Overview

1. Press the MENU button and enter the password to open the menu.

Note: The default admin password is “0000” (4 times zero).

2. Right-click anywhere on the screen to open the main menu. Right-click again to close.

QUICK START

GENERAL –TIME SETUP

DATE SETUP

DATE INFO –DAYLIGHT

SYSTEM

TOOLS –SYSTEM INFO

EVENT INFORMATION

QUICK SEARCH –EVENT SEARCH –HDD INFO –EVENT LOG

ADVANCED CONFIG

CAMERA –DETECTION –ALERT –NETWORK –SNTP –DISPLAY –RECORD –REMOTE

SCHEDULE SETTING

RECORD –DETECTION

For more information, refer to the full user manual.

Date and Time Setting

Before operating your DVR, please set the date and time on your DVR first.

Note: DO NOT change the date or time of your DVR after the recording function is activated. Otherwise, the recorded data

will be disordered and you will not be able to find the recorded file from backup by time search. If users change the date or

time accidentally when the recording function is activated, it is recommended to clear all HDD data, and start recording again.

Note: When using the DVR for the first time, leave it powered on for at least 48 hours continuously after the date and time is

set correctly. It prevents DVR time from resetting if the DVR power is disconnected. If the DVR time resets after power

disconnection (for example caused by a power outage), the internal battery may run down. In that case, you have to replace

the internal battery. Please refer to the appendices in the full user manual for more information.

1. Press the MENU button and enter the admin password to open the menu.

2. Select the QUICK START menu item.

3. Use the NAVIGATION button to move to the TIME SETUP menu item. Select it to set date and time.

Password Setting

1. Press the MENU button and enter the password to open the menu.

2. Select the SYSTEM menu item.

3. Go to TOOLS. Select ADMIN PASSWORD (or OPERATOR PASSWORD) and press the ENTER button to set the password.

Note: An operator cannot access the main menu, only the quick menu bar (see below).

4. Press the cursor up ( ) or down ( ) button to select the value of the first number and press ENTER to save and go to

the next character, or use the mouse to select the desired value. Repeat this for all four password numbers.

Note: The default admin password is “0000” (4 times zero).

Record Settings

1. Press the MENU button and enter the password to open the menu.

2. Select the QUICK START menu item.

3. Select the GENERAL menu item using the NAVIGATION button.

4. Set the image size, image quality, and images per second for recording.

Refer to the full user manual on the included CD-ROM for more details.

Audio Playback

Press the SLOW and ZOOM button simultaneously to select the desired audio channel or use the quick menu bar (see further

in this manual). The current audio channel is indicated in the status bar.

Switching Users

1. The DVR can be accessed as administrator ( ) or operator ( ), icons are indicated in the status bar.

2. To switch between users, click on the user icon ( or ) to lock the current session ( ).

3. Press on the key lock icon ( ) then enter the password of the desired profile.

CCTVPROM17

V. 03 –05/05/2014 6 ©Velleman nv

7. Operation

Display

The following image shows the screen layout.

system date and time

general system status

available HDD capacity

channel status

live audio from audio channel 1–4 (indicated

in white)

playback audio from audio channel 1–4 (indicated in

yellow)

audio channel unselected

timer recording on

digital zoom on (yellow) / off

USB mouse connected

LAN connected / internet connected / no network connection

USB flash drive connected

overwrite on (default)

key lock on

PTZ mode

sequence mode

motion mode

recording mode

alarm mode

administrator logged on

operator logged on

Note that actual screen icons might differ slightly from the ones shown above.

Quick Menu Bar

Note: Only available when USB mouse is connected.

Move the mouse pointer to the left of the screen to extend the quick menu bar and show the functions:

Open channel switch panel.

Show playback control panel.

Zoom-in mode (select desired channel first before entering zoom mode).

Select audio channel (live mode only live channels can be selected).

Enter PTZ mode and show PTZ control panel.

Recording

1. Check whether the camera(s) is (are) properly connected and a HDD is present inside the device.

2. If the auto-recording and pre-alarm functions are enabled, the device will start recording images.

oBy default, the recording icon ( ) is displayed.

oIf the motion or alarm detection is activated and a motion or alarm is detected, the motion ( ) resp. alarm ( ) icon is

displayed.

oIf timer recording is enabled, the timer recording icon ( ) is displayed.

oBy default, the device is in HDD overwrite mode and the icon ( ) is displayed.

Playback

Make sure the control panel is not locked and press the PLAY button on the control panel or use the quick menu bar to open

the playback control panel:

progress bar

control bar

event search

information bar

Note: There must be at least 8192 images of recorded data for playback to work properly. If not, the device will stop

playback. For example, if the IPS is 30, the recording time should be at least 273 seconds (8192 images / 30 IPS) for the

playback to work properly.

Increase or decrease the playback speed using the fast forward ( ) and fast rewind ( ) buttons. Click once to get 4x

speed forward/backward, click twice to get 8x speed, etc. Maximum speed is 32x.

Press the pause button ( ) to pause playback.

CCTVPROM17

V. 03 –05/05/2014 7 ©Velleman nv

Press the stop button ( ) to return to live monitoring.

Press the SLOW button once to get 1/4x speed playback, and click twice to get 1/8x speed playback.

There are four ways to search recorded files: by record list, motion list, alarm list, or by timer list.

1. To search an event, press the LIST button on the front panel (make sure the control panel is not locked). An overview of

the recorded file types (ALARM, MANUAL, MOTION, SYSTEM, and FULL LIST) is shown.

2. Select the desired list and recording from the list.

3. Press ENTER to start playback.

Note: The recorded files can also be searched via the included Video Viewer software.

8. Push Video Configuration

8.1 Pin Connection

This DVR can send notifications and video to your mobile devices, such as iPhone, iPad, and Android mobile devices, when an

alarm event occurs (push video).

For alarm triggering, you can use the camera on input channel 1 together with an external alarm sensor (such as a magnetic

contact) via the external I/O block on the DVR rear panel.

Refer to the table below for an overview of the pin connections of the external I/O block.

Function

Description

GND

Ground

RS-485-A

For PTZ camera control

RS-485-B

External alarm,

COM

Connect an external device such as a buzzer or siren between the COM and NO

pins. These pins function as a switch (normal open).

In normal operation, there is no connection between COM and NO (switch is open).

When an alarm is triggered, COM connects with NO (switch is closed).

Attention: Max. voltage and current are 24 VDC, 1 A.

External alarm,

Alarm input

Alarm-in for push video. Connect an alarm sensor between pin 1 (GND) and

pin 6. When the sensor triggers an alarm, the DVR starts recording from the

camera connected to channel 1.

8.2 Configuration

Before configuring push video, make sure that:

The DVR system is set up as described in Hardware Setup and Preliminary Settings.

The DVR is connected to internet.

You have installed the EagleEyes app on your iPhone, iPad, or Android mobile devices.

For details, please refer to Mobile Surveillance via EagleEyes.

To configure push video:

1. Right-click to show the main menu and select ADVANCED CONFIG > NOTIFY.

2. Set GUARD to ON.

3. Configure your alarm sensor type (normal open or normal closed).

Careful! You have to select the opposite type for push video to work correctly.

If your alarm sensor is N.C. (normal closed, alarm goes off when the contact opens), then select ALARM N.O.

If your alarm sensor is N.O. (normal open, alarm goes off when the contact closes), then select ALARM N.C.

ADVANCED CONFIG

CAMERA

PUSH VIDEO

PUSH MESSAGE

MESSAGE MAIL

VIDEO MAIL

DETECTION

GUARD

ALERT

CH01

ALARM OFF / INTERNAL ALARM



CH1

NETWORK

DISPLAY

RECORD

DEVICES

DCCS

IVS

NOTIFY

EXIT

4. Open EagleEyes and add this DVR to the EagleEyes address book.

Note: For more information on EagleEyes operation, please visit www.eagleeyescctv.com.

CCTVPROM17

V. 03 –05/05/2014 8 ©Velleman nv

5. Enable push video.

6. Trigger the input alarm.

7. Receive an event notification and see video.

9. Mobile Surveillance via EagleEyes

EagleEyes is a powerful mobile surveillance program developed by AV TECH Corporation.

Note: For more operations details about EagleEyes, visit http://www.eagleeyescctv.com.

For any comment or question about this program, contact Velleman. Visit www.velleman.eu for contact details.

9.1 Prerequisite

Before installing EagleEyes on your mobile phone for remote surveillance, make sure you have checked the following:

Your mobile platform is iPhone, iPad, BlackBerry, or Android.

You have subscribed to mobile internet services on your phone; the service is available for use on your phone.

Note: You may be charged for internet access via wireless or 3G networks. For the internet access rates, contact your

local network operator or service provider.

You have noted down the IP address, port number, user name, and password used to access your network camera via

internet.

9.2 Downloading EagleEyes

1. Connect to www.eagleeyescctv.com from your mobile device.

Note: Do not download EagleEyes from your computer.

2. Select Products > Software > Mobile app to access the EagleEyes introduction page.

3. Select your platform (iOS, BlackBerry, or Android) and download the program you need.

Note: This DVR is compatible only with iPhone, iPad, BlackBerry, and Android mobile devices.

4. Follow the on-screen instructions for downloading.

When the download is completed, EagleEyes is installed automatically on your mobile device.

Note: For more information about the configuration of this program, read the related instructions on the download page.

10. Push Video Configuration on Your Mobile Device

10.1 Prerequisite

Before setting up push video, make sure you have checked the following:

You have an iPhone, iPad, or Android mobile device with EagleEyes installed. For more details, see Mobile Surveillance

via EagleEyes.

An external alarm device is connected to the push video alarm-in on the rear panel. To record alarm occurrences, make

sure you also have a camera connected to CH1. Refer to Push Video Configuration for details on video channels and

alarm pins.

The event record function of your DVR is enabled.

The motion detection function of your DVR is enabled.

Your DVR is connected to internet. For details, refer to http://www.surveillance-download.com/user/CMS.pdf.

CCTVPROM17

V. 03 –05/05/2014 9 ©Velleman nv

10.2 Enabling Push Video

From iPhone or iPad

1. In the iPhone/iPad main menu, select Settings > Notifications.

2. Select EagleEyes and make sure Notification Center is set to ON.

3. Open EagleEyes and switch the Push Video button to ON. You receive a message that push notification (push video) is

enabled.

4. Return to the main menu of your iPhone/iPad.

You receive event notifications when there is an alarm event. Select Launch to play the recorded clip immediately.

From Android Mobile Device

In the address book, switch Guard from OFF to ON.

11. Technical Specifications

video format

PAL

video compression

H.264

video input

8 channels, composite video signal 1 Vpp / 75 ohm BNC

video output

composite video signal

1 Vpp / 75 ohm BNC

VGA

max. 1600 x 1200 pixels

HDMI

max. 1600 x 1200 pixels

video loop out

–

maximum recording rate

(PAL)

frame

704 × 576 pixels @ 100 fps (PAL)

CIF

352 × 288 pixels @ 200 fps (PAL)

adjustable recording speed

–

image quality setting

best –high –normal –basic

hard disk storage

built-in SATA type, supports 1 x HDD, supported HDD capacity 2 TB (HDD not incl.)

recording mode

manual / timer / motion / network / alarm

refresh rate

200 IPS for PAL

multiplex operation

live display, record, playback, backup and network

audio I/O

4 x audio in, 1 x audio out (mono)

motion detection area

16 × 12 grids per channel

motion detection sensitivity

high, normal, low

pre-alarm recording

8 MB

backup device

USB 2.0 flash drive (for backup and firmware updates)

CCTVPROM17

V. 03 –05/05/2014 10 ©Velleman nv

Ethernet

10/100BASE-T, supports remote control and LiveView via Ethernet

network connection

supports TCP/IP, PPPoE, DHCP and DDNS function

mobile surveillance

EagleEyes software

smart

phones

push video

on iPad, iPod touch, iPhone, Android phone & tablet

remote login via all smart phone platforms (Apple, Android, BlackBerry, Nokia

Symbian and Windows Mobile)

computer

CMS (Central

Management System)

remote surveillance to monitor up to 10 different IP

addresses (Windows & Mac OS)

web browser

Internet Explorer, Firefox, Google Chrome and Safari via

Java, QuickTime or VLC plug-in

IR remote control

remote control DVR and PTZ (DVRRC4)

PTZ control

yes (via RS-485)

alarm I/O

1 input (for push video) / 1 output

digital zoom

2 x (live & playback)

key lock

yes

video loss detection

yes

camera title

up to 6 characters

video adjustments

hue / colour / contrast / brightness

date display format

YY/MM/DD, DD/MM/YY, MM/DD/YY, and off

power source

19 VDC

power consumption

< 42 W

daylight saving

yes

operating temperature

10–40 °C (50–104 °F)

system recovery

system auto recovery after power reconnected

dimensions

343 x 59 x 233 mm

IR bullet colour cameras

pick-up element

1/3" HR colour CCD image sensor

number of pixels

728 (H) x 488 (V) –PAL

resolution

540 TV lines

min. illumination

0.1 lux (F2.0); 0 lux (IR on)

IR LEDs

range (IR light)

15 m

S/N ratio

> 48 dB (AGC off)

water resistance

IP66

electronic shutter

1/50 to 1/100 000 s

lens

f3.6mm –f9.5mm

lens angle

86° –36°

white balance

automatic

AGC

yes

video output

1.0 Vpp composite, 75 ohm

power supply

12 VDC ± 10 %

current consumption

65 mA (IR off), 220 mA (IR on)

dimensions

Ø 97 x 60 mm

weight

320 g

Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or

injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version

of this manual, please visit our website www.velleman.eu. The information in this manual is subject to change

without prior notice.

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of

the compatibility of our products with the products of the different manufacturers. Windows, Windows Mobile are registered

trademarks of Microsoft Corporation in the United States and other countries. iPad, iPhone, iOS are trademarks of Apple Inc.,

registered in the U.S. and other countries. Android is a trademark of Google Inc. The Trademark BlackBerry® is owned by

Research In Motion Limited and is registered in the United States and may be pending or registered in other countries.

Velleman NV is not endorsed, sponsored, affiliated with or otherwise authorized by Research In Motion Limited. Symbian is a

registered trademark of Symbian Software Ltd, Symbian Ltd.

No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the

prior written consent of the copyright holder.

Altri manuali per CCTVPROM17

Indice

Lingue:

Altri manuali Velleman Sistema di sicurezza

Velleman

Velleman CCTVPROM15 Manuale utente

Velleman

Velleman HAM06WS Manuale utente

Velleman

Velleman HAM211 Manuale utente

Velleman

Velleman HAM201 Manuale utente

Velleman

Velleman Velleman Manuale utente

Velleman

Velleman CCTVPROM7 Manuale utente

Velleman

Velleman CAMSETW1 Manuale utente

Velleman

Velleman ISPROM1 Manuale utente

Velleman

Velleman HAM06WS Manuale utente

Velleman

Velleman CAMSETW2 Manuale utente

Velleman

Velleman HAM10N Manuale utente

Velleman

Velleman CAMSETW3 Manuale utente

Velleman

Velleman camset 29 Manuale utente

Velleman

Velleman SP50 SIMPLE CYCLE GUARD Manuale utente

Velleman

Velleman CU2101/KIT Manuale dell'operatore

Velleman

Velleman IVSPROM2 Manuale utente

Velleman

Velleman CU2200 Manuale utente

Velleman

Velleman CAMSET10 Manuale utente

Velleman

Velleman CAMSET13 Manuale utente

Velleman

Velleman CCTVPROM5 Manuale utente

Velleman

Velleman CCTVPROM8 Manuale utente

Velleman

Velleman CAMSET31 Manuale utente

Velleman

Velleman HAM220 Manuale utente

Velleman

Velleman CCTVPROM12 Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente