Velleman CCTVPROM18 Manuale utente

CCTVPROM18

CCTV PACK EAGLE EYES: H.264 FULL FRAME DVR + 2 IR BULLET

CAMERAS

CCTV-PACK EAGLE EYES: H.264 FULL FRAME-VIDEORECORDER +

2 CILINDRISCHE IR-CAMERA'S

ENSEMBLE DE VIDÉOSURVEILLANCE EAGLE EYES: ENREGISTREUR

H.264 PLEIN ÉCRAN + 2 CAMÉRAS IR CYLINDRIQUES

JUEGO DE VIGILANCIA EAGLE EYES: VIDEOGRABADORA H.264

PANTALLA COMPLETA + 2 CÁMARAS CILÍNCRICAS CON LEDS IR

CCTV-PROMOPACK EAGLE EYES: H.264 VOLLBILD-VIDEORECORDER

+ 2 ZYLINDRISCHE KAMERAS MIT IR-LEDS

CONJUNTO CCTV EAGLE EYES: VIDEOGRAVADOR H.264 +

2 CÂMARAS CILÍNDRICAS IR

ZESTAW TELEWIZYJNY EAGLE EYES: REJESTRATOR DVR H.264

PELNORAMKOWY + 2 KAMERY TUBOWE NA PODCZERWIEN

QUICK INSTALLATION GUIDE 3

BEKNOPTE HANDLEIDING 11

GUIDE D'INSTALLATION RAPIDE 19

GUÍA RÁPIDA 27

SCHNELLEINSTIEG 35

GUIA RÁPIDO PARA INSTALAÇÃO 43

SKRÓCONA INSTRUKCJA INSTALACJI 51

CCTVPROM18

V. 02.1 –30/01/2014 2 ©Velleman nv

2 x

12 VDC input terminal

Video output connector

12VDC-ingangsaansluiting

Video-uitgangsaansluiting

Connexion d’entrée 12 VCC

Connexion de sortie vidéo

Conexión de entrada 12 VCC

Conexión de salida de vídeo

12VDC-Eingangsanschluss

Video-Ausgangsanschluss

Terminal de entrada 12 VDC

Conector de saída de vídeo

Wejście zasilania 12 VDC

Złącze wyjściowe wideo

Actual product may differ from the shown images due to product enhancement.

Door productverbetering kan het product afwijken van de getoonde afbeeldingen.

Les images peuvent différer du produit réel en raison des améliorations constantes effectuées sur le produit.

Debido a algunas mejoras, el producto actual puede diferir de las imágenes visualizadas.

Durch einige Verbesserungen kann das aktuelle Produkt von dem angezeigten Bild abweichen.

O produto atual pode ser diferente das imagens apresentadas devido ao aperfeiçoamento do mesmo.

Rzeczywisty produkt może różnić się od przedstawionych rysunków ze względu na wprowadzane ulepszenia.

CCTVPROM18

V. 02.1 –30/01/2014 3 ©Velleman nv

QUICK INSTALLATION GUIDE

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the

environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a

specialized company for recycling. This device should be returned to your distributor or to a local recycling service.

Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the device

was damaged in transit, don't install or use it and contact your dealer.

NOTE: This document is a Quick installation guide. For more details, refer to the full user manual which can be found on the

included CD-ROM.

Package content:

1 x full frame DVR with push status function

2 x IR colour cameras

2 x 20 m camera cables (DVR4/CAB)

1 x 19 V power supply

1 x high-efficiency DC-DC converter for DVR and cameras

remote control (DVRRC5).

2. Safety Instructions

Keep the device away from children and unauthorised users.

Risk of electroshock when opening the cover. Touching live wires can cause life-threatening electroshocks.

Always disconnect mains power when the device is not in use or when servicing or maintenance activities are

performed. Handle the power cord by the plug only.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

Indoor use only

Keep this device away from rain, moisture, splashing and dripping liquids. Never put objects filled with liquid

on top.

Keep this device away from dust.

Keep this device away from extreme heat. Make sure the ventilation openings are clear at all times. For

sufficient air circulation, leave at least 1" (± 2.5 cm) in front of the openings.

Protect this device from shocks and abuse. Avoid brute force when operating the device.

Familiarise yourself with the functions of the device before actually using it.

All modifications of the device are forbidden for safety reasons.

Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.

Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not

accept responsibility for any ensuing defects or problems.

Do not use this product to violate privacy laws or perform other illegal activities.

4. Features

compression format: H.264 real-time

high resolution recording:

ofull frame: 704 x 576 pixels

o960H: 960 x 576 pixels with 700 TVL cameras: CAMCOLBUL28, CAMCOLD23, CAMCOLD24

mobile surveillance via free EagleEyes software:

oiPhone, iPad, Android: push status notification: system events (video loss, clear HDD, key unlock, HDD full, net login)

oother smart phones (BlackBerry, Windows Mobile, Symbian): remote surveillance

mobile phone connection via GPRS, 3G data or Wi-Fi

GUI (Graphical User Interface) display and USB mouse control

automatic integrated Dynamic Domain Name Service (DDNS): free service.

CCTVPROM18

V. 02.1 –30/01/2014 4 ©Velleman nv

Not included:

hard disk: HD500GB/S, HD1TB/S & HD2TB/S

VGA & DVI monitor: MONSCA4N1

computer mouse.

5. Overview

Refer to the illustrations on page 2 of this manual.

Front panel

LED indications

HDD

Reading or recording activities on the hard disk.

ALARM

An alarm was triggered.

TIMER

Timed recording is enabled.

PLAY

The DVR is in playing mode.

POWER

DVR power is on.

Navigation

button

In settings mode:

Press ▲/ ▼/ ◄/ ►to move the cursor accordingly.

When changing a setting, press + or –to increase or decrease the setting.

In playback mode:

Press to pause playback.

Press to stop playback.

Press to fast forward.

Press to fast rewind.

Press to enter the main menu.

ENTER

Press to confirm settings.

LIST

List the information of the recorded files.

QUICK SEARCH / RECORD / MOTION / ALARM / TIMER / FULL LIST

PLAY

Press to play the recorded video.

SLOW

In playback mode, press to play the recorded file slowly.

ZOOM

In live or playback mode, press to enlarge the image of the selected channel.

SEQ

Press to show all screens sequentially in full screen mode. Press again to quit.

4CH: Press to show the 4 channel display mode.

1–4

Press a button to select the corresponding channel.

AUDIO

= SLOW + ZOOM

Press SLOW and ZOOM simultaneously to select live or play-back sounds.

P.T.Z.

= SEQ +

Press SLOW and simultaneously to enter or exit PTZ control mode.

Opens the QUICK SEARCH function.

USB port (2 x)

Connect a USB flash drive for video backup to one USB port; connect a USB mouse to the other.

Note: do not connect two USB flash drives or USB mice at the same time.

Rear panel

LAN port

Connect the DVR to a local network by plugging a network cable into this port.

VGA

Connector for video monitor (not included).

AUDIO IN

4 audio input channels to connect four external audio sources, e.g. from cameras with audio.

AUDIO OUT

1 audio output to connect to an audio device, e.g. a speaker (mono).

VIDEO IN

4 video input channels to connect 4 external video sources, e.g. cameras.

HDMI

1 video output channel to connect the DVR to the main monitor.

EXTERNAL I/O

Use a 9-pin DSUB connector to connect external signals, e.g. alarm, PTZ…

19V DC

Power supply input

CCTVPROM18

V. 02.1 –30/01/2014 5 ©Velleman nv

6. Hardware Setup

Refer to the illustrations on page 2 of this manual.

Connecting a Video Monitor

Obtain a suitable monitor (not included) and connect it to the HDMI or VGA video output port on the back of the DVR.

Connecting the Power Supply

1. Plug the DC output connector of the included power adaptor into the 19 VDC power input at the back of the DVR.

WARNING: only use the included adaptor.

2. Plug the included power cable into the adaptor input connector and plug the other end into the mains. Do not switch the

DVR on yet.

Connecting a Camera

1. You can connect up to four suitable cameras (2 cameras included). Each camera needs its own power supply.

2. Connect the video output of the camera to either video input at the back of the DVR. The number next to the input

connectors represents the channel number. Connector type is BNC (cables included).

Connecting Audio

1. The DVR supports four audio inputs. Connect the audio output of an audio source to an audio input of the DVR. Make

sure to connect the audio channel to the corresponding video channel. Connector type is BNC.

2. There is also an audio output connector. Connect an audio device, e.g. a speaker to this connector when desired.

Connector type is BNC.

Connecting Local Area Network (LAN)

Connect the DVR to a local network by plugging a network cable into the LAN port at the back of the DVR. Connector type is

8P8C (RJ45). To setup the network connection, press the Menu button and select . Refer to the full manual on the included

CD-ROM for details.

7. Getting Started

1. Make sure the connected cameras are powered on.

2. Set the power switch of the DVR at the back of the device to ON.

It takes about 15 to 30 seconds to start up.

Menu Overview

Move your mouse to enter the DVR password with the password keypad.

The default user name and password are both “admin”.

The status will change from (key lock) to (unlock).

Right-click anywhere on the screen to show the main menu, and right-click again to exit.

QUICK START

Click to set the status display, image settings, and date & time.

SYSTEM

Click to set the system configurations.

EVENT INFORMATION

Click to enter the event search menu.

CCTVPROM18

V. 02.1 –30/01/2014 6 ©Velleman nv

ADVANCED CONFIG

Click to set CAMERA, DETECTION, ALERT, NETWORK, DISPLAY, RECORD, DEVICES,

DCCS, IVS & NOTIFY.

SCHEDULE SETTINGS

Click to set record timer, detection timer & alarm timer.

Refer to the full user manual on the included CD-ROM for more details.

Setting Date and Time

Before using the DVR, the time and date shall be set to get a valid time stamp.

1. Right-click the screen and enter the admin password.

2. Click the QUICK START icon.

3. Select TIME SETUP to set date and time.

Note: once recording started, do not change date or time as this will make it very difficult to find back the recorded files.

Note: when using the DVR for the first time and the correct time is set, leave it on for at least 48 hours.

Password Setting

1. Right-click the screen and enter the admin password.

2. Click the SYSTEM icon.

3. Go to ACCOUNT. Select the password you want to set and click EDIT.

Note: an operator cannot access the main menu, only the quick menu bar (see below).

4. Press the cursor up ( ) or down ( ) button to select the value of the first number and press enter to save and go to

the next character, or use the mouse to select the desired value. Repeat this for all four password numbers.

Note: the default admin password is admin.

Record Settings

1. Right-click the screen and enter the admin password.

2. Use the arrow button to select ADVANCED CONFIG.

3. Use the arrow button to select RECORD.

4. Select the record type you want to set (manual, event or timer).

5. In "CHANNEL", select "ALL" to apply the changes to all channels.

6. Or, select "BY CHANNEL" to set the image size, image per second & image quality individually for each channel.

7. Use the arrow button to select GENERAL.

8. Set the image size, images per second (I.P.S.) and image quality.

9. Select APPLY.

Refer to the full user manual on the included CD-ROM for more details.

Audio Playback

Press the SLOW and ZOOM button simultaneously to select the desired audio channel or use the quick menu bar (see below).

The current audio channel is indicated in the status bar.

Switch Users

1. The DVR can be accessed as administrator ( ) or operator ( ), icons are indicated in the status bar.

2. To switch between users, click on the user icon ( or ) to lock the current session ( ).

3. Click the key lock icon ( ) and enter the password of the desired profile.

8. Push Status Configuration

If you have an iPhone, iPad, or Android mobile device, you can use the DVR's push status function: the DVR will send a

notification to your device when an alarm event occurs.

The alarm events are:

ALL

VIDEO LOSS

HDD FULL

POWER ON

HDD (CLEAR / NO HDD / OVER TEMPERATURE)

NET LOGIN

KEY UNLOCK

NETWORK

UPS

SYSTEM ABNORMAL.

To do so, you need to install the EagleEyes app on your mobile device (see Installing the EagleEyes App below).

CCTVPROM18

V. 02.1 –30/01/2014 7 ©Velleman nv

On the DVR:

1. Set "ACTION" to ON.

2. Select the system event or events you want to get notified about on your mobile device.

You will receive a text message whenever an event occurs.

8.2 Installing the EagleEyes App

Prerequisites

Before installing EagleEyes to your mobile phone for remote surveillance, make sure you have checked the following:

You have subscribed to and you can access mobile internet services for your mobile phone.

Note: You may be charged for internet access via wireless or 3G networks. For the internet access rate details, please

check with your local network operator or service provider.

You have noted down the IP address, port number, user name and password used to access your network camera from

the internet.

Where to Download

1. Connect to www.eagleeyescctv.com from your mobile device, and sign in.

Please do not try to download EagleEyes from your computer.

oFor Android, select the download link from the website to start downloading.

oFor iPhone and iPad, two versions of EagleEyes are available: EagleEyesHD Plus (at a fee), and EagleEyesHD Lite

(free).

2. Select the version you want, and you will be directed to the App Store to download the application.

3. When the download is completed, EagleEyes will install automatically to the default location or any location you choose.

Note: For more details about configuring and operating EagleEyes, visit the website www.avtech.com.tw.

8.3 Configuration

Before configuring push status, make sure that:

The DVR system is set up as described in point 3. Connection and Setup in the full manual on the included CD-ROM.

The DVR is connected to the internet.

The EagleEyes app is installed on your mobile device (see Installing the EagleEyes App above).

Steps

1. Open EagleEyes, and add this DVR to the EagleEyes address book.

For more details about EagleEyes operation, visit www.eagleeyescctv.com.

2. In the EagleEyes app, enable push status as described below.

3. Try triggering an alarm event to see if you get a push status message.

9. Operation

Display

The following image shows the screen layout.

system date and time

general system status

available HDD capacity

channel status

live audio channel 1–4 enabled

playback audio channel 1–4 enabled (yellow)

audio channel disabled

timer recording

digital zoom on (yellow) / off

USB mouse connected

LAN connected

internet connected

no network connection

hard disk overwrite (default)

USB flash drive connected

PTZ mode

CCTVPROM18

V. 02.1 –30/01/2014 8 ©Velleman nv

key lock on

motion mode

sequence mode

alarm

recording mode

alarm mode

administrator logged on

operator logged on

Note that actual screen icons might differ slightly from the ones shown above.

Quick Menu Bar

Note: the quick menu bar is only available when a USB mouse is connected.

Move the cursor to the arrow mark to open the quick menu bar. It contains the following icons:

Click to show the channel switch panel and select the channel you want.

Click to display the playback control panel.

Click to play the latest recorded video clip, or click to enter the search list.

Switch to the channel you want first, and click to enter the zoom-in mode.

In this mode, click and drag the red frame on the bottom left of the screen to move to the place you want to see.

To exit this mode, click .

Click to show the power-off panel to either stop or reboot the system.

Refer to the full user manual on the included CD-ROM for more details.

Recording

Check whether the camera or cameras are properly connected.

When the auto-recording and pre-alarm functions are enabled, the device will start recording images.

Default the recording icon ( ) is shown.

In case the motion or alarm detection is activated and a motion or alarm is detected, the motion ( ) resp. alarm ( )

icon is shown.

When timed recording is enabled, the timed recording icon ( ) is shown and the timed recording LED is on.

Default, the device is in HDD overwrite mode and the icon ( ) is shown.

Play-back

Make sure the control panel is not locked and press the PLAY button on the control panel or use the quick menu bar to open

the playback control panel:

progress bar

information

playback control

event search

set repeat function AB / open backup menu

Note: play-back needs at least 8192 recorded images to work properly (e.g. with images per second set to 30, the recording

must be at least 273 seconds long).

The fast forward ( ) and fast rewind ( ) buttons will increase resp. decrease the play-back speed. Repeatedly pressing

the button will increase/decrease speed to 4x, 8x, 16x, or 32x (max.).

Press the pause button ( ) to temporary suspend video play-back.

CCTVPROM18

V. 02.1 –30/01/2014 9 ©Velleman nv

Press the stop button ( ) to return to live monitoring.

Press the SLOW button once to set play-back speed to 1/4th and twice for 1/8th.

1. To search an event, press the LIST button on the front panel.

The system displays an overview of recorded file types.

2. You can search the recordings by file type. Available types are ALARM, MANUAL, MOTION, SYSTEM, and FULL LIST.

3. Select a list and recording from this list.

4. Press ENTER to start play-back.

Note: the recorded files can also be searched via the included Video Viewer software.

10. Technical specifications

DVR

video format

PAL

video compression

H.264

video input

4 channels, composite video signal 1 Vpp / 75 ohm BNC

video output

HDMI (1080p) & VGA (max. 1920 x 1080 pixels)

video loopout

–

maximum recording rate

(PAL)

960H: 960 x 576 pixels with 100 IPS (PAL)

frame/D1: 704 x 576 pixels with 100 IPS (PAL)

image quality setting

super best –best –high –normal

hard disk storage

built-in SATA type, supports 1 x HDD, supported HDD capacity over 3 TB (HDD not incl.)

HDD quick cleaning

quick cleanup the "index system" of the recorded files. 1 TB in under 2 seconds

recording mode

manual / timer / motion / network / alarm controlled

multiplex operation

live display, record, playback, backup and network

audio I/O

4 x audio in, 1 x audio out (mono)

motion detection area

16 x 12 grids per channel

motion detection sensitivity

high –normal –low

pre-alarm recording

yes

backup device

USB 2.0 flash drive (for backup and firmware updates)

Ethernet

10/100BASE-T, supports remote control and LiveView via Ethernet

network connection

supports TCP/IP, PPPoE, DHCP and DDNS function

mobile surveillance

smart

phones

EagleEyes software

push status: on iPad, iPod Touch, iPhone, and Android phone

remote login via all smart phone platforms (Apple, Android, BlackBerry, Nokia

Symbian and Windows Mobile)

computer

video viewer software on Windows and Mac

web browser: Internet Explorer, Firefox, Google Chrome and Safari via Java,

QuickTime or VLC plug-in

IR remote control

remote control DVR and PTZ (DVRRC5 incl.)

PTZ control

yes (via RS-485)

alarm I/O

4 in / 1 out

digital zoom

2 x (live & playback)

key lock

yes

video loss detection

yes

camera title

up to 6 characters

video adjustments

hue / colour / contrast / brightness

date display format

YY/MM/DD, DD/MM/YY, MM/DD/YY, and off

power source

19 Vdc

power consumption

< 40 W

daylight saving

yes

operating temperature

10–40 °C (50–104 °F)

system recovery

system auto recovery after power reconnected

dimensions

375 x 281 x 61 mm

Cameras

water resistance

IP67

pick-up element

1/3" HR colour CCD image sensor

number of pixels

753 (H) x 582 (V) –PAL

resolution

520 TV lines

CCTVPROM18

min. illumination

0.1 lux

IR LEDs

max. IR projection distance

15 m

S/N ratio

> 48 dB (AGC off)

electronic shutter

1/50 to 1/100 000 s

lens

f 3.6 mm / F 2.0

lens angle

92.6°

colour rolling suppress

yes

AGC

yes

white balance

automatic

video output

1.0 Vpp composite, 75 ohm

audio

power supply

12 Vdc

current consumption

70 mA (IR off), 270 mA (IR on)

operating temperature

0–45 °C

dimensions

140 x 56 x 80 mm

weight

285 g

Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or

injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version

of this manual, please visit our website www.velleman.eu. The information in this manual is subject to change

without prior notice.

No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the

prior written consent of the copyright holder.

Indice

Lingue:

Altri manuali Velleman Sistema di sicurezza

Velleman

Velleman High-Q Velleman-kit K3505 Manuale utente

Velleman

Velleman CAMSET2 Manuale utente

Velleman

Velleman CAMSET2C Manuale utente

Velleman

Velleman MA620B Manuale utente

Velleman

Velleman CCTVPROM15 Manuale utente

Velleman

Velleman HAM2828 Manuale utente

Velleman

Velleman HAM220 Manuale utente

Velleman

Velleman CTC1000SI Manuale utente

Velleman

Velleman HAM221 Manuale utente

Velleman

Velleman camset 29 Manuale utente

Velleman

Velleman HAM06WS Manuale utente

Velleman

Velleman CCTVPROM16 Manuale utente

Velleman

Velleman CCTVPROM17 Manuale utente

Velleman

Velleman Camcolbul12 Manuale utente

Velleman

Velleman HAM201 Manuale utente

Velleman

Velleman Velleman Manuale utente

Velleman

Velleman HAMPAG Manuale utente

Velleman

Velleman CAMSETW2 Manuale utente

Velleman

Velleman DWH Series Manuale di servizio

Velleman

Velleman CCTVPROM5 Manuale utente

Velleman

Velleman CCTVPROM6 Manuale utente

Velleman

Velleman PEM7D Manuale utente

Velleman

Velleman SP50 SIMPLE CYCLE GUARD Manuale utente

Velleman

Velleman HAM263D Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente