Velleman DVM99 Manuale utente

DVM99

3-IN-1 THERMOMETER / IR – THERMISTOR PROBE – CLAMP

3-IN-1 THERMOMETER / IR – THERMISTORSONDE – KLEM

THERMOMÈTRE 3 EN 1 / IR – SONDE À THERMISTANCE – PINCE

TERMÓMETRO 3 EN 1 / IR – SONDA TERMISTOR – PINZA

3-IN-1 THERMOMETER / IR – THERMISTOR – KLEMME

USER MANUAL 3

GEBRUIKERSHANDLEIDING 8

NOTICE D’EMPLOI 13

MANUAL DEL USUARIO 18

BEDIENUNGSANLEITUNG 23

DVM99

V. 03 – 22/08/2013 2 ©Velleman nv

DVM99

V. 03 – 22/08/2013 3 ©Velleman nv

User manual

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of

the device after its lifecycle could harm the environment. Do not

dispose of the unit (or batteries) as unsorted municipal waste; it

should be taken to a specialized company for recycling. This device

should be returned to your distributor or to a local recycling

service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before

bringing this device into service. If the device was damaged in transit, don't

install or use it and contact your dealer.

2. Safety Instructions

Keep this device away from children and unauthorized users.

Keep this device away from rain, moisture, splashing and

dripping liquids.

Do not hold the IR-thermometer too long to objects that

continuously generate high heat (e.g. hot plate) to avoid damage

to the housing.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages

of this manual.

•Protect this device from shocks and abuse. Avoid brute force when

operating the device.

•Protect the device against extreme heat and dust.

•Familiarise yourself with the functions of the device before actually

using it.

•All modifications of the device are forbidden for safety reasons. Damage

caused by user modifications to the device is not covered by the

warranty.

•Only use the device for its intended purpose. Using the device in an

unauthorised way will void the warranty.

DVM99

V. 03 – 22/08/2013 4 ©Velleman nv

•Damage caused by disregard of certain guidelines in this manual is not

covered by the warranty and the dealer will not accept responsibility for

any ensuing defects or problems.

•Keep this manual for future reference.

4. Features

•temperature readout in °C or °F

•data hold

•lock feature for continuous scanning

•over range indication

•automatic power off

•adjustable emissivity

•resolution 0.1°C (0.1°F)

5. Overview

Refer to the illustrations on page 2of this manual.

IR sensor

hold/up button

IR LCD

ON/OFF button

B2 probe/clamp LCD G clamp trigger

mode button

clamp

IRT/down button

probe

6. Operation

•The thermometer can measure temperature in 3 ways, using IR, probe

or clamp. The desired way will determine how to switch on the

thermometer:

oto use the IR sensor [A], press the IRT button [D].

oto use the clamp [H], press the ON/OFF button [F].

oto use the probe [I], first unfold the probe [I], and then press the

ON/OFF button [F].

•In hold mode, the thermometer will automatically switch of after ±15s,

in continuous mode after ±20min.

IR-mode

•All data is shown on the IR LCD [B1].

•Aim the IR sensor [A] towards the target and press and hold the IRT

button [D] to measure the temperature. When releasing the IRT button

[D] the last measured value will remain on the display.

Note: The distance-to-target ratio is 1:1; the thermometer should be

held as close as possible to the target.

DVM99

V. 03 – 22/08/2013 5 ©Velleman nv

•Use the mode button [C] to scroll through the available functions. The

current function is flashing (except ε).

MIN The MIN function is not supported.

MAX The MAX function is not supported.

LOCK Press the IRT button [D] to enable LOCK-mode (continuous

measurement). Press the hold button [E] to exit LOCK-mode.

°C/°F When °C indication is flashing, press the IRT button [D] to switch

to °F mode and vice versa.

εPress the up [E] and down [D] buttons to set the emissivity

(see §7).

•To switch off the thermometer press the ON/OFF button [F] two times.

Clamp mode

•All data is shown on the probe/clamp LCD [B2].

•Push the clamp trigger [G] to open the clamp [H]. Place the clamp over

the target (e.g. a hot pipe) and read the temperature.

•Press the mode button [C] to switch between °C and °F display.

•Press the hold button [E] to hold the current value on the display. Press

the hold button [E] again to continue measuring.

•To switch off the thermometer press the ON/OFF button [F].

Probe mode

•All data is shown on the probe/clamp LCD [B2].

•Insert the probe [I] into the target and read the temperature.

•Press the mode button [C] to switch between °C and °F display.

•Press the hold button [E] to hold the current value on the display. Press

the hold button [E] again to continue measuring.

•To switch off the thermometer press the ON/OFF button [F].

7. Useful information

Emissivity

Emissivity describes the energy-emitting characteristics of materials. Most

organic or oxidized surfaces have an emissivity of ±0.95 (default setting).

Measuring shiny or polished surfaces will be inaccurate. Use some masking

tape or paint to compensate, allow sufficient time for the tape or paint to

reach the surface temperature.

Refer to the table for an indication of some emissivity values.

DVM99

V. 03 – 22/08/2013 6 ©Velleman nv

Substance

Emissivity

Substance

Emissivity

Asphalt

0.90 to 0.98

Cloth (black)

0.98

Concrete

0.94

Human skin

0.98

Cement

0.96

Leather

0.95 to 1.00

Sand 0.90 Charcoal (powder) 0.96

Earth 0.92 to 0.96 Lacquer 0.80 to 0.95

Water

0.92 to 0.96

Lacquer (matt)

0.97

Ice

0.96 to 0.98

Rubber (black)

0.94

Snow

0.83

Plastic

0.85 to 0.95

Glass 0.90 to 0.95 Timber 0.90

Ceramic

0.90 to 0.94

Paper

0.70 to 0.94

Marble

0.94

Chromium oxides

0.81

Plaster

0.80 to 0.90

Copper oxides

0.78

Mortar

0.89 to 0.91

Iron oxides

0.78 to 0.82

Brick

0.93 to 0.96

Textiles

0.90

8. Maintenance

•The sensor lens is the most delicate part of the thermometer and should

be kept clean at all times.

•To do this, only use a soft cloth or cotton bud with a little water or

medical alcohol.

•Allow the lens to fully dry before using the thermometer.

•Wipe the other parts of the thermometer regularly with a moist, lint-

free cloth. Do not use alcohol or solvents.

•Do not submerge the thermometer in water or any other liquid.

•There are no user-serviceable parts.

•Contact your dealer for spare parts if necessary.

9. Batteries

•Make sure the thermometer is off.

•Open the battery cover at the back of the thermometer. Unscrew the

screw and lift the cover.

•Insert 2 new CR2032 batteries (‘+’ up)

•Place the cover back and tighten the screw.

DVM99

V. 03 – 22/08/2013 7 ©Velleman nv

WARNING: do not puncture or throw batteries in fire. Dispose

of batteries in accordance with local regulations.

Keep batteries away from children.

10.Technical specifications

measurement range

IR -35°C ~ 260°C (-31°F ~ 500°F)

probe -40°C ~ 260°C (-40°F ~ 500°F)

clamp

-40°C ~ 200°C (-40°F ~ 392°F)

IR accuracy

± 2% of reading ± 2°C / ± 4°F

clamp opening

± 1” (25mm)

operating temperature

-40°C ~ 260°C (-40°F ~ 500°F)

storage temperature

-20°C ~ 65°C (-4°F ~ 149°F)

accuracy (Tobj = 15°C ~ 35°C,

amb

= 25°C) ± 1.5°C (2.7°F)

resolution

0.1°C/0.1°F

response time

< 500mS

emissivity range

0.1~1.0 adjustable

wavelength 5µm - 14µm

auto switching-off

± 20 minutes / ± 15 seconds

distance-to-spot ratio

D/S = 1:1

power supply

2 X CR2032 batteries (incl.)

dimensions

183 x 52 x 25mm

weight

103g

Use this device with original accessories only. Velleman nv cannot

be held responsible in the event of damage or injury resulting from

(incorrect) use of this device.

For more info concerning this product and the latest version of this

manual, please visit our website www.velleman.eu.

The information in this manual is subject to change without prior

notice.

DVM99

V. 03 – 22/08/2013 8 ©Velleman nv

The copyright to this manual is owned by Velleman nv. All

worldwide rights reserved.

No part of this manual or may be copied, reproduced, translated or reduced

to any electronic medium or otherwise without the prior written consent of

the copyright holder.

Gebruikershandleiding

1. Inleiding

Aan alle ingezetenen van de Europese Unie

Belangrijke milieu-informatie betreffende dit product

Dit symbool op het toestel of de verpakking geeft aan dat, als het

na zijn levenscyclus wordt weggeworpen, dit toestel schade kan

toebrengen aan het milieu. Gooi dit toestel (en eventuele

batterijen) niet bij het gewone huishoudelijke afval; het moet bij

een gespecialiseerd bedrijf terechtkomen voor recyclage. U moet

dit toestel naar uw verdeler of naar een lokaal recyclagepunt

brengen. Respecteer de plaatselijke milieuwetgeving.

Hebt u vragen, contacteer dan de plaatselijke autoriteiten

betreffend de verwijdering.

Dank u voor uw aankoop! Lees deze handleiding grondig voor u het toestel

in gebruik neemt. Werd het toestel beschadigd tijdens het transport,

installeer het dan niet en raadpleeg uw dealer.

2. Veiligheidsinstructies

Houd buiten het bereik van kinderen en onbevoegden.

Bescherm tegen regen, vochtigheid en opspattende vloeistoffen.

Houd de thermometer nooit te lang en te dicht bij een

warmtebron (bv. kookplaat) om beschadiging te vermijden.

DVM99

V. 03 – 22/08/2013 9 ©Velleman nv

3. Algemene richtlijnen

Raadpleeg de Velleman® service- en kwaliteitsgarantie achteraan deze

handleiding.

•Bescherm de thermometer tegen schokken. Vermijd brute kracht

tijdens de bediening.

•Bescherm tegen extreme temperaturen en stof.

•Leer eerst de functies van het toestel kennen voor u het gaat

gebruiken.

•Om veiligheidsredenen mag u geen wijzigingen aanbrengen. Schade

door wijzigingen die de gebruiker heeft aangebracht valt niet onder de

garantie.

•Gebruik het toestel enkel waarvoor het gemaakt is. Bij onoordeelkundig

gebruik vervalt de garantie.

•De garantie geldt niet voor schade door het negeren van bepaalde

richtlijnen in deze handleiding en uw dealer zal de verantwoordelijkheid

afwijzen voor defecten of problemen die hier rechtstreeks verband mee

houden.

•Bewaar deze handleiding voor verdere raadpleging.

4. Eigenschappen

•temperatuurweergave in °C of °F

•data hold

•vergrendelfunctie voor continue meting

•aanduiding voor meting buiten bereik

•automatische uitschakeling

•instelbare emissiviteit

•resolutie van 0,1°C (0,1°F)

5. Omschrijving

Raadpleeg de figuur op pagina 2van deze handleiding.

IR-sensor

HOLD/

lcd IR

ON/OFF

lcd sonde/klem

trekker

functieknop (MODE)

bek

IRT/

sonde

DVM99

V. 03 – 22/08/2013 10 ©Velleman nv

6. Gebruik

•De thermometer heeft 3 meetfuncties: via IR, de sonde of de bek. De

inschakeling bepaalt de gebruikte meetfunctie:

oDruk op IRT [D] om te meten via de IR-sensor [A].

oDruk op ON/OFF [F] om te meten via de bek [H].

oKlap eerst de sonde [I] open en druk op ON/OFF [F] om te meten

via de sonde.

•In hold-functie zal de thermometer na 15 seconden automatisch

uitschakelen, in continue meetfunctie gebeurt dit na ± 20 minuten.

Meting via de IR-sensor

•Alle data verschijnt op de lcd [B1].

•Richt de sensor [A] naar het meetpunt en houd de IRT-knop [D]

ingedrukt. Bij het loslaten van de IRT-knop [D] verschijnt de laatste

meting op de display.

Opmerking: De verhouding afstand-meetpunt bedraagt 1:1. Houd de

thermometer dus zo dicht mogelijk tegen het meetpunt.

•Scroll door de verschillende functies met de MODE-knop [C]. De

geselecteerde functie knippert (uitgenomen ε).

MIN

De MIN-functie wordt niet ondersteund.

MAX

De MAX-functie wordt niet ondersteund.

LOCK

Druk op de IRT-knop [D] om de thermometer te vergrendelen

(continue meting). Houd de HOLD-knop [E] ingedrukt om de

functie op te heffen.

°C/°F

Druk, indien de °C-aanduiding knippert, op de IRT-knop [D] om

naar de °F-weergave te schakelen en omgekeerd.

Stel de emissiviteit in met [E] en [D] (zie §7).

•Schakel de thermometer uit door tweemaal op ON/OFF [F] te drukken.

Meting via de bek

•Alle data verschijnt op de lcd [B2].

•Druk op de trekker [G] om de bek te openen [H]. Plaats de bek rond

het te meten object (bv. buis) en lees de waarde van de display af.

•Schakel tussen de °C- en °F-weergave met de MODE-knop [C].

•Houd de HOLD-knop [E] ingedrukt om de huidige waarde op de display

vast te houden. Houd de knop opnieuw ingedrukt om verder te gaan.

•Schakel de thermometer uit door de ON/OFF-knop [F] in te drukken.

Altri manuali per DVM99

Indice

Lingue:

Altri manuali Velleman Termometro

Velleman

Velleman DVM105 Manuale utente

Velleman

Velleman DVM8090 Manuale utente

Velleman

Velleman DVM439 Manuale utente

Velleman

Velleman TA25 Manuale utente

Velleman

Velleman DVM8861 Manuale utente

Velleman

Velleman DTP6 Manuale utente

Velleman

Velleman SHE11 Manuale utente

Velleman

Velleman DEM106 Manuale utente

Velleman

Velleman DVM440 Manuale utente

Velleman

Velleman TA2 Manuale utente

Velleman

Velleman WT902 Manuale utente

Velleman

Velleman DEM102 Manuale utente

Velleman

Velleman DEM401 Manuale utente

Velleman

Velleman DEM104 Manuale utente

Velleman

Velleman DVM99 Manuale utente

Velleman

Velleman WSPT1 Manuale utente

Velleman

Velleman DTP6 Manuale utente

Velleman

Velleman IPDD900 Manuale utente

Velleman

Velleman DVM8869 Manuale utente

Velleman

Velleman DTP1N Manuale utente

Velleman

Velleman DVM8838 Manuale utente

Velleman

Velleman ED2A011 Manuale utente

Velleman

Velleman DVM002 Manuale utente

Velleman

Velleman VMA324 Manuale utente

Manuali Termometro popolari di altre marche

Delton

Delton 981A Manuale utente

Baker

Baker MM2P Manuale utente

Tarmo

Tarmo 320281 Manuale utente

Citizen

Citizen CTD 504 Manuale utente

TFA

TFA 14.1500 Manuale utente

Vive

Vive DMD1010 Manuale utente

Gotemp

Gotemp THB4002 Manuale utente

GREISINGER

GREISINGER G 1202 Manuale utente

Amprobe

Amprobe TMD-53W Manuale utente

Trotec

Trotec BP10 Manuale utente

Radiance instruments

Radiance instruments RT616 Series Manuale utente

Eurolec

Eurolec IR151 Manuale utente

Scaneo

Scaneo TS42B Manuale utente

Sper scientific

Sper scientific 800043 Manuale utente

Microlife

Microlife NC 200 Manuale di istruzioni

Motorola

Motorola MBP69SN Guida alla configurazione

The MeatStick

The MeatStick The MeatStick Manuale utente

Hama

Hama TH35-A Manuale utente