Vello BG-C15 Manuale utente
BG-C15
BAT TERY GRIP
Designed for the Canon T7i and 77D
DSLR Cameras
USER’S MANUAL
Introduction
Thank you for choosing Vello and congratulations on
your new BG-C15 battery grip purchase. Enjoy the many
benefits that a battery grip offers, such as extended
shooting time and more control and comfort when
shooting in a vertical (portrait) orientation. The Vello
BG-C15 is compatible with the Canon T7i and 77D DSLR
cameras. It accepts up to two Canon LP-E17 rechargeable
batteries and offers an alternate shutter-release button.
Please read through this entire manual
before using the BG-C15 battery grip.
2
Precautions
1.
The BG-C15 should be used only with compatible
devices specified in this manual.
2.
Use only with the batteries and battery holders
recommended in this manual.
3.
If you notice smoke, noise, or an unusual smell from
the battery pack, discontinue use immediately. Remove
the batteries, and take the device to a Vello authorized
reseller.
4.
The battery level may not display properly if batteries
are installed before mounting the grip.
5. Remove batteries from the grip when not in use.
6. Do not attempt to disassemble.
7.
Avoid exposing this product to water or extreme
humidity, and keep it in a dry, cool place.
8. Keep out of reach of children.
9. All images are for illustrative purposes only.
3
OVERVIEW INTRODUCTION
ASSEMBLY
Overview
1
6
2
3
717
5
4
8
11
13
10
9
12
14
16
15
4
1Shutter release button
2Camera battery door holder
3Hand-strap mount
4Tripod socket
5Nonslip grip
6Cable-release socket
7Battery tray compartment
8Thumbwheel lock
9Mounting screw
10 Power contacts
11 Contact cap
12 Battery tray
13 Battery tray lock
14 Battery slots
15 Battery slot contacts
16 Battery slot locking flanges
17 2.5 mm shutter release cable
5
ASSEMBLY OVERVIEW INTRODUCTION
Attaching the Grip
1.
Ensure that the camera
power is turned off.
2.
Turn the camera upside
down, and open its battery
chamber door. Pull gently
at a 45° angle until the
chamber door detaches.
3.
Slide the camera battery
chamber door into the
BG-C15’s chamber door
holder for safekeeping.
6
4.
Insert the BG-C15’s power
contacts into the camera’s
battery chamber as shown.
Make sure to align the
camera’s tripod socket with
the BG-C15’s mounting
screw.
5.
Rotate the locking wheel
counterclockwise until it is
firmly tightened.
6.
Connect the shutter release
cable from the cable release
socket on the battery grip
to the remote release port
on the camera body.
7
OVERVIEW
ASSEMBLY INTRODUCTION
Inserting Batteries
1.
Twist the battery tray’s
lock counterclockwise, and
remove the battery tray
from the grip.
2.
Make sure the contacts for
the batteries match the
battery slot contacts of
either side of the battery
tray.
3.
Insert the battery toward
the contacts, and in
between the locking flanges.
Push down to lock the
battery in place.
8
When removing the grip, turn off
the camera power and remove
the batteries.
4.
Repeat steps 2 and 3 for the
second battery.
5.
Insert and lock the battery
tray inside the battery grip.
9
OVERVIEW
ASSEMBLY INTRODUCTION
Removing the Batteries
1.
Twist the battery tray lock counterclockwise, and
remove the battery tray from the grip.
2.
Remove either battery by pulling up and lifting it
out of the battery tray.
10
Indice
Altri manuali Vello Accessori per fotocamere
Vello
Vello Extenda LW-100 Manuale utente
Vello
Vello LA-C-NAF Manuale utente
Vello
Vello BG-N17 Manuale utente
Vello
Vello Macrofier Manuale utente
Vello
Vello BG-N21 Manuale utente
Vello
Vello BG-C4 Manuale utente
Vello
Vello shutterboss Manuale utente
Vello
Vello BG-C6 Manuale utente
Vello
Vello BG-C15-2 Manuale utente
Vello
Vello Snap-On Manuale utente
Vello
Vello BG-P1 Manuale utente
Vello
Vello EPN - DK19 Manuale utente
Vello
Vello CB-900 Manuale utente
Vello
Vello BG-N1 Manuale utente
Vello
Vello BG-C8 Manuale utente
Vello
Vello BG-N19 Manuale utente
Vello
Vello EXTENDA Manuale utente
Vello
Vello FWIRC-N Manuale utente
Vello
Vello BG-N5 Manuale utente
Vello
Vello FWIRC-C FREEWAVE Manuale utente
