Vello BG-S1 Manuale utente

BAT TERY GRIP

Designed for the Sony

SLT-A77,A77 II, and A99 II Cameras

USER’S MANUAL

BG-S1

Introduction

Thank you for choosing Vello and congratulations on

your new BG-S1battery grip purchase. Enjoy the many

benefits that a battery grip offers, such as extended

shooting time and more control and comfort when

shooting in a vertical (portrait) orientation.

The Vello BG-S1is compatible with the Sony Alpha

SLT-A77, A77 II, and A99 II DSLR cameras. The BG-S1

accepts two Sony NP-FM500H rechargeable batteries.

The BG-S1is equipped with an alternate shutter-

release button, AF start button, smart teleconverter/

focus magnifier, Fn/image rotation, AEL/slow sync/image

index, AF/MF/enlarge, and exposure compensation

buttons, a Multi selector, and a main dial for shooting in

a vertical position.

Please read through this entire manual before using

the BG-S1 battery grip.

Precautions

1. The BG-S1should only be used with compatible

devices specified in this manual.

2. Only use with batteries and battery holders

recommended in this manual.

3. Cover the power terminals with the contact

cap when the BG-S1is not in use. This prevents

electrical shorts caused by metal objects touching

the power terminals.

4. When the battery holder is removed from the

grip, remove the batteries or place the holder in

a container to prevent electrical shorts caused by

contact with other metal objects.

5. If you notice smoke, an unusual smell or noise from

the battery pack, discontinue use immediately.

Remove the batteries and take the device to a Vello

authorized reseller.

6. Turn the grip power off when not shooting

vertically.

7. The battery level may not display properly if

batteries are inserted before mounting the grip.

8. Remove batteries from the grip when not in use.

9. Do not attempt to disassemble.

10. Avoid water or extreme humidity and keep in a

dry and cool place.

11. Keep out of reach of children.

OVERVIEW INTRODUCTION

ASSEMBLY

Overview

910

16 19

1Electrical Contacts

Communicates with the camera

electronics.

Mounting Screw

Aligns with the camera’s tripod socket.

3Guide Pin

Helps align the camera to the grip.

4Battery Chamber Door Dial

Locks and unlocks the battery

compartment door.

5Battery Tray Compartment

Houses the battery tray.

6Smart Teleconverter / Focus

Magniﬁer Button*

7Fn / Image Rotation Button*

8Multi Selector*

AEL / Slow Sync / Image Index

Button*

Rear Control Dial

11 Exposure Compensation Button*

12 Grip Power ON / OFF

AF / MF / Enlarge Button*

Camera Battery Chamber Cover

Slot

Attachment Wheel

Secures the grip to the camera.

16 Contact Cap

Protects grip contacts. Keep covered

when the grip is not in use.

17 Hand Strap Mount

18 Tripod Socket

19 Main Dial*

20 Shutter-Release Button*

21 Battery Tray Release

22 Battery Tray

Holds up to two Sony NP-FM500H

batteries.

* Performs the same function as on the

camera.

OVERVIEW INTRODUCTION

ASSEMBLY

Attaching The Grip

1. Ensure that the power is

turned off on the camera

and that the power switch

is set to OFF on the battery

grip.

2. Open the camera

battery chamber cover

and remove the camera

battery.

3. Remove the protective cap

from the battery grip.

4. Connect the BG-S1 grip to

the camera, while aligning

the grip’s mounting screw

with the camera’s tripod

socket. Make sure to

leave the camera battery

chamber cover open, so it

will slide into the BG-S1’s

camera battery chamber

cover slot.

5. Rotate the attachment

wheel in the direction

shown by the arrow until it

is firmly tightened.

When removing the grip, turn

the camera power off, remove

batteries, and replace protective

contact cap.

OVERVIEW INTRODUCTION

ASSEMBLY

Inserting Batteries

1. Ensure that the power is

turned off on the camera

and the grip.

2. Rotate the dial on the

battery chamber door to

OPEN position, and the

door will open up.

3. Slide the blue latch in the

direction of the arrow to

release the battery tray.

Remove battery tray from

the battery chamber.

4. Insert up to two Sony

NP-FM500H batteries by

placing them into either

slot in the battery tray,

while ensuring the correct

orientation as shown on

the tray.

5. Slide the battery tray into

the battery chamber until

it locks into place. Close

the battery chamber door

and lock it by rotating the

dial to CLOSE position.

6. Rotate the grip power

to ON and then turn

on the camera’s power.

Check the battery level

in the control panel or

viewﬁnder.

OVERVIEW INTRODUCTION

ASSEMBLY

Specifications

Power Source One or two Sony NP-FM500H rechargeable batteries

Operating Temperature 32 – 104 °F (0 – 40 °C)

Dimensions Approximately 5.6 × 5 × 3.5 (142.2 × 127 × 89)

Weight Approximately 9.4 oz (266 g) (excluding battery tray and batteries)

* Approximate measurements.

Speciﬁcations and design are subject to change without notice.

Indice

Altri manuali Vello Accessori per fotocamere

Manuali Accessori per fotocamere popolari di altre marche

Viltrox

Viltrox EF-NEX Istruzioni per l'installazione

Calumet

Calumet 7100 Series CK7114 Manuale utente

Ropox

Ropox 4Single Series Manuale utente

Cambo

Cambo Wide DS Digital Series Istruzioni operative

Samsung

Samsung SHG-120 Manuale utente

Ryobi

Ryobi BPL-1820 Manuale operativo

Aegis

Aegis ABL-36020P Manuale utente

Pentax

Pentax Data Back Fc Manuale utente

Fantasea

Fantasea EyeGrabber F Series Manuale utente

Honeywell

Honeywell HDZ20HD Manuale utente

EGO

EGO BA1400T Manuale utente

Sima

Sima SRW-62 Manuale utente

Shape

Shape A7SSMKIT Manuale utente

Slide Kamera

Slide Kamera HST-2 Manuale utente

Power works

Power works 2902613 Manuale utente

SES

SES SE-2047-2 Manuale utente

Olympus

Olympus PT-EP05L Manuale utente

Starlite

Starlite OctoDome nxt Manuale utente