Vertex Wireless VW450 Manuale utente
1 | page
V.1.4E
2 | page
3 | page
1. INSTALLATION GUIDE
1.1. FRONT, SIDE AND REAR VIEW OF VW450 07
1.2. CHECKINGTHECOMPONENTS 08
1.3. SIMCARDINSTALLATION 09
1.4. BATTERYINSTALLATION 10
1.5. INSTALLATION OF THEANTENNAAND LOCATION OF THE EQUIPMENT FOR VOICE SERVICE 11
1.6. DESKTOPINSTALLATION 13
1.7. WALLMOUNTING 14
2. GETTING TO KNOW VW450
2.1. LEDSTATUSINDICATOR 15
3. BASIC OPERATIONS
3.1. MAKINGCALLS 17
3.2. RECEIVINGCALLS 17
4. BASIC SETTINGS
4.1. RECEIVERVOLUME 18
4.2. DIALDELAYTIME 18
4.3. SPEEDDIALENTRY 18
4.4. TIMEANDDATE 18
4.5. CIDFORMAT 19
4.6. BANDSELECTION 19
4.7. EQUIPMENTLOCK 19
4.8. PINLOCK 20
4.9. POLARITYREVERSE 20
4.10. LOOPCURRENTDISCONNECT 21
4.11. DTMFTONEGENERATION 21
4 | page
4.12. AUTOMATICPINENTERING 21
4.13. FACTORYRESET 21
4.14. VOICEMAILINDICATION 21
5. SUPPLEMENTARY SERVICE FEATURES
5.1. CALLFORWARDING 22
5.2. CALLBARRING 23
5.3. CALLWAITING 25
5.4. SIMSECURITYCODES 26
5.5. CALLERID 26
6. DATA SERVICE FEATURES 27
7. FAX SERVICE FEATURE
7.1. ANALOGFAX 27
7.2. DIGITALFAX 28
8. GENERAL INFORMATION
8.1. SPECIFICATIONS 29
8.2. ADDITIONALSAFETYINFORMATION 30
8.3. GUARANTEE 32
8.4. TROUBLESHOOTING 33
9. CONFORMANCE STATEMENTS
APPENDIXA 33
5 | page
Welcome to your VW450
VW450 is a Fixed Wireless Terminal designed to provide better wireless connectivity between wire telephone and GSM
850/900/1800/1900 band network with high sensitivity to receive signal and large transmitting power to expand
extensively the effective coverage of GSM service.
Main function & features
- SIMPLE TO INSTALL AND EASY TO MAINTAIN
- COMPATIBLE TO MOST TELEPHONES, PBX
- BATTERY BACK UP DURING AC POWER OUTAGES
- PROVIDE REVERSAL POLARITY SIGNAL FOR METERING
- ADJUSTABLE RECEIVER VOLUME
- 3 LED DISPLAY (SIGNAL/MODE/POWER)
- 10 SPEED DIALS
- CALLER ID DISPLAY
- NETWORK BAND SELECTION
- CALL WAITING/FORWARDING/BARRING
- CONFERENCE CALL
- DATA COMMUNICATION (INTERNET OVER CSD/GPRS, DIGITAL FAX)
- ANALOG FAX (VW450)
6 | page
For your safety
Here is important information for safe and efficient operation.
Please read this information before using your VW450.
For optimal performance, install this indoors. When specially used in an outdoor area, it may not work in below 0℃or over
50℃.
Install VW450 on hard, flat surface for proper ventilation.
Avoid using VW450 in high temperature or near a source of fire or gas.
Avoid storing VW450 in cold areas.
Do not expose VW450 to moisture or dust.
Do not use VW450 in the hospital. It will interfere with medical electronic equipments such as a peace maker.
Do not use harsh chemicals, cleaning solvents to clean VW450. And wipe with a soft, clean, dry cloth to clean it.
Do not knock, drop, and shake VW450 to avoid breaking the case.
Use only the supplied or approved replacements
Do not use VW450 with a car battery.
Do not touch the antenna when VW450 is being used.
Do not use VW450 with a damaged antenna. Have your antenna replaced by a qualified technician immediately.
Use only the provided antenna. Do not use the provided antenna for any other purpose.
Use only the provided adapter. Do not use the provided adapter for any other purpose
If VW450 fails to work for any reason, do not attempt to disassemble.
7 | page
1. Installation guide
1.1. Front, Side and Rear View of VW450
8 | page
1.2. Checking the components
Check to make sure that you have all the parts shown below after opening the package. If any piece is missing or
broken, please call your agent or customer service.
1. MAIN UNIT
2. USER MANUAL
3. LI-ION BACKUP BATTERY
4. DC POWER ADAPTER
5. CABLE FOR GPRS CONNECTION (VW450): OPTIONALACCESSORY
6. ANTENNAAND THE CABLE WITH THEIR SUPPORT (YOU SHOULD COUPLE THE ANTENNA IN THEIR SUPPORT)
9 | page
1.3. SIM card installation
1. Disconnect the power supply.
2. Open battery cover on the bottom side of the VW450.
3. Disconnect the DC power cable to VW450
4. Take out the battery pack in the right position between the hold bars
5. Insert the SIM card into the socket as shown in the picture.
* Note: Make sure the SIM card is aligned properly with the directional arrow on the holder.
6. Connect the DC power cable to VW450.
7. Insert the battery pack in the right position between the hold bars.
8. Close the battery cover.
9. Connect the power supply to VW450.
10 | page
1.4. Battery installation
1. Disconnect the power supply.
2. Open battery cover on the bottom side of VW450.
3. Connect the DC power cable to VW450.
4. Close the battery cover.
5. Connect the power supply to VW450.
Indice
Altri manuali Vertex Wireless Terminale touch
