Vertiv MPX PRC Manuale utente

SL-20839_REV1

590-1625-501A

MPX™ PRC

Quick Installation Guide

Before assembling and installing a

Liebert® MPX™, read and understand all

warnings and cautions in the Liebert®

MPX™ User Manual - Global Applications

which can be downloaded at www.

VertivCo.com.

Vertiv strongly recommends that the

MPX power entry module (PEM) be

installed by an individual who is properly

trained and qualified to perform electrical

work.

WARNING: The Liebert MPX contains

high voltage that can cause serious

personal injury or death. The unit must be

installed in a restricted-access location.

NOTE: If you need support for your MPX

power rail chassis (PRC), contact a Vertiv

representative. The MPX PRC contains no

user-serviceable parts. Never work alone.

De-energize the input power and discon-

nect power connections to all equipment

in the rack before installing a Liebert MPX

or connecting input power to the unit.

ASSEMBLY

Tools Required

• Phillips® (Tip Size 2) screwdriver

• 5 mm Allen wrench

To assemble and install the MPX

PRC:

1. Attaching an MPX PRC to the

cabinet

For 78.84 in (2000 mm) racks, attach

two mounting brackets to the side

horizontal sections A1 for each MPX

PRC using an Allen wrench. For

86.61 in (2200 mm) racks, attach

two mounting brackets to a vertical

section A2.

NOTE: L-shaped brackets are used

exclusively with Knurr® Miracel™ racks.

L- or Z-shaped brackets can be used

for racks from other manufacturers.

2. Placing the mounting buttons

Insert spring nuts into the rear of

the MPX PRC. Tighten the screws

through the mounting buttons and

into the spring nuts using a Phillips®

(

Tip Size 2

) screwdriver.

Z-shaped bracket L-shaped bracket

MPX PRC Bracket Vertical Install (L-shaped Bracket Shown)

Typical rack upright

VertivCo.com |Vertiv Headquarters, 1050 Dearborn Drive, Columbus, OH, 43085, USA

registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no responsibility, and disclaims all

liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.

MPX™ PRC

Quick Installation Guide

SL-20839_REV1

590-1625-501A

3. Securing the MPX™ PRC

Insert mounting buttons through the

bracket cutout and slide it down into

the slot to secure it.

4. Connecting the grounding

cable (optional)

WARNING: Do not connect input

power to the MPX PEM until the

Liebert MPX is fully assembled and

mounted in place. As soon as input

power is connected to the MPX PEM,

the contacts on the underside are live

with hazardous voltage and the MPX

PRC carries live hazardous voltage.

Insert a spring nut into the rack frame

near the grounding point. Attach a

ground wire to the rack with a screw,

washer and lock washer, securing

the screw to the rack’s frame with

the spring nut. Use a second field-

supplied screw, washer and lock

washer to secure the ground wire to

the MPX PRC at the connection point

marked with an earth-ground symbol.

NOTE: For instructions on how to

install an MPX PEM and an MPX

branch receptacle module (BRM)

onto the MPX PRC, see the MPX™

PEM Quick Installation Guide and

the MPX BRM™ Quick Installation

Guide. For product details, see

the

Liebert® MPX™ User Manual -

Global Applications

which can be

downloaded at www.VertivCo.com.

Typical rack upright

Altri manuali Vertiv Rack e supporto

Vertiv

Vertiv VE Series Manuale utente

Vertiv

Vertiv 24BA1200-23 Manuale utente

Vertiv

Vertiv KMMLED156 Istruzioni di installazione e manutenzione

Vertiv

Vertiv SmartAisle 03.029.214 Series Manuale utente

Vertiv

Vertiv NetSure 48BA1200-23 Manuale utente

Vertiv

Vertiv RMPSU Manuale utente

Vertiv

Vertiv Smaract Manuale utente

Vertiv

Vertiv Knurr Miracel 2 Manuale utente

Vertiv

Vertiv KMMLED156 Manuale utente

Vertiv

Vertiv Avocent Manuale utente

Vertiv

Vertiv Knurr PowerTrans2 Manuale utente

Vertiv

Vertiv SmartAisle-SwitchTube 19 Core 320mm 7-12HE/U Manuale utente

Vertiv

Vertiv Knurr DCM Manuale utente

Vertiv

Vertiv Knurr DCM Heavy Duty Rack Manuale utente

Vertiv

Vertiv MPH2 Manuale utente

Vertiv

Vertiv NetSure 48BA1200-19 Manuale utente

Vertiv

Vertiv eSure 60017372 Manuale utente

Vertiv

Vertiv MPE Manuale utente

Vertiv

Vertiv DCF 48U Istruzioni di installazione e manutenzione

Vertiv

Vertiv DCE E42611 Manuale utente

Vertiv

Vertiv SmartAisle 12-21HE/U Manuale utente

Vertiv

Vertiv Knurr DCM Manuale utente

Vertiv

Vertiv VP8641 Manuale utente

Manuali Rack e supporto popolari di altre marche

Salamander

Salamander Acadia AC/W/L400/WH Manuale utente

Fohhn

Fohhn VAT-09 Guida utente

ricoo

ricoo FS0522 Manuale utente

AMSOIL

AMSOIL BMK-22 Guida rapida

Kargo Master

Kargo Master 48220 Manuale utente

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuale utente

ricoo

ricoo S1222 Manuale utente

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuale utente

VidaBox

VidaBox VB MNT FFS2 Manuale utente

Welch Allyn

Welch Allyn 48960 Manuale utente

Arkon

Arkon CM035-ST-2 Manuale utente

PROEL

PROEL PLWIN60C Manuale utente

Agilent Technologies

Agilent Technologies E2609B Manuale utente

Mustang

Mustang MV-ARM4 Manuale utente

Mounting Solutions

Mounting Solutions WRM-320 Manuale utente

Pyle

Pyle PMKSPAD1 Manuale utente

ShelterIt

ShelterIt 21208 Manuale utente

SPL

SPL RackPack?4 1040 Manuale utente