Viavito setry Manuale utente
Owner’s Manual.
2-in-1 Elliptical Cross
Trainer Exercise Bike
SETRY
www.viavito.com
Manual version 2.1
02 www.viavito.com
Congratulations
on purchasing your
very own SETRY
2-in-1 Elliptical Cross
Trainer Exercise Bike.
Manual Contents.
You have chosen a high-quality, safe and
innovative product, and we are certain you
will enjoy using and it will help keep you
Please take the time to read this owner’s
manual as it will help you to get the most
out of your new product.
For more information, or if you require
any assistance please email us at
support@viavito.com.
Safety Information 03/04
Machine Assembly 05/12
Contents Checklist 05
Assembly Instructions 06/12
Console Instructions 13/19
Button Functions 14
Display Functions 15
Operation 16/17
Training in Program Mode 18
Training in Manual Mode 18
Training in User Program Mode 19
Training in H.R.C Mode 19
Training in Watt Mode 20
Body Fat Mode 20
Conditioning Guidelines 21/27
Why Exercise? 21
Target Heart Rate 22
Beginners Guide to Exercise 23
Workout Tips 23
How to Begin 24
How Hard Should You Work? 24
Tips for Stretching 25
Warm-Up and Cool-Down 26/27
Customer Support 28/29
Contact Information 28
Manufacturer's Warranty 29
Technical Information 30/37
Space Required 30
Exploded Diagram 31
Parts List 32
03www.viavito.com
Safety Information.
• Please read all instructions carefully
before using this product.
• Retain this manual for future reference.
vary slightly from the illustrations and
are subject to change without notice.
IMPORTANT SAFETY NOTICE:
note the following precautions
before using the product.
01 Assemble the machine exactly as per
the descriptions in this instruction man-
ual using the tools supplied.
02 Check all the screws, nuts and other
connections before using the machine
trainer has been built correctly.
03 This machine is for indoor, home use
only.
04 Position the trainer on a clear, dry and
level surface. Do not position it near
water or outdoors.
05 Place a suitable base (e.g. rubber mat,
wooden board etc.) beneath the ma-
chine in the assembly area to protect it
from dirt.
06 Before beginning training, ensure there
is a clear space of 0.6 metres around
the trainer in all directions, free from
any objects or potential hazards.
07 Use the trainer only for its intended
purpose as described in this manual.
08 This trainer may only be used by one
person at a time.
09 Always wear appropriate workout
clothing when exercising. Aerobic
shoes are required when using this
machine.
10 Inappropriate use of this trainer such as
alcohol, not in line with these instruc-
tions or excessive usage, may result in
serious injury or death.
11
by incorrect or excessive training. Be-
fore using this trainer or doing any ex-
ercise programme, consult your doctor.
This is especially important for people
over the age of 35 or those with pre-ex-
isting health problems.
12 This trainer is not suitable for therapeu-
tic or medical purposes.
13 Before exercising on this trainer, always
warm up and do the stretching exercis-
14 WARNING! Heart rate monitoring
systems may be inaccurate. Over
exercising may result in serious injury or
death. If you feel faint stop exercising
immediately.
15 Disabled persons should not use this
physician in attendance.
04
16 This trainer is not suitable for use by
minors. Children should be kept away
from it at all times.
17 The maximum user weight is 120kg
(264.5lbs).
18 The safety level of the trainer can only
be maintained if it is examined regularly
for damage and wear, e.g. bearings,
connection points.
19 Examine the equipment carefully before
you use it, especially the components
most susceptible to wear, e.g. handlebar,
cranks, pedals and the connection points.
20 Stop using the trainer immediately if
there are any defective components and
keep it out of use until you have replaced
the defective components or it is
engineer.
21 Use only original spare parts for any
necessary repairs.
22 When altering any adjustable parts, such
as the saddle height, ensure this is done
correctly and note the marked maximum
and minimum positions.
23 DO NOT use aggressive cleaning
products such as detergents to clean
the trainer. Remove any drops of sweat
RECYCLING INFORMATION
Used electrical and electronic equipment (WEEE) should not be mixed with general
household waste. For proper treatment, recovery and recycling, please take this
product to designated collection points where it will be accepted free of charge.
Alternatively, in some countries you may be able to return your products to your
local retailer upon purchase of an equivalent new product. Disposing of this product
correctly will help save valuable resources and prevent any potential negative
inappropriate waste handling. Please contact your local authority for further details
of your nearest designated collection point. Penalties may be applicable for incorrect
disposal of this waste, in accordance with your national legislation
SAFETY STANDARDS
This equipment meets the requirements of European safety directives such as: the
Electromagnetic Compatibility (EMC) Directive and the Low Voltage Directive (LVD).
www.viavito.com
05
Machine Assembly.
Contents Checklist Make sure you have the following parts:
www.viavito.com
06 www.viavito.com
Assembly Instructions
Attention: Please follow these assembly instructions step by
step to assemble this bike:
Step One.
01 Assemble the front stabiliser (F) and
rear stabiliser (G) onto the main frame
(D) by using the square neck bolt
(N-1), the curved washer (N-4), the spring
washer (N-3), and the cup nut (N-2)
02 Adjust the leg leveller height by turning
the wheel on the rear foot cap
Please also view our Youtube Assembly Guide video, should
you require extra assistance in setting up this product:
https://youtu.be/sRD5FvEEOnk
07
www.viavito.com
Step Two.
01 Fix the seat (U) onto seat post (V)
02 Insert the seat post (V) into the main
08 www.viavito.com
Step Three.
01 Connect the upper computer cable
(C-3) to the lower computer (D-7), then
insert the handlebar post (C) into the
main frame
02 Assemble the pedal axle cover (N-16)
onto the pedal axle
03 Fix the pedal axle onto main frame
using bolt (N-17)
09
www.viavito.com
Step Four.
01 Connect the movable handlebar
support (E) to the handlebar support
washer (N-3) and the waved washer (N-4)
02 Attach the moving handlebar (E) to
the front post (C) through the swing
axle (S) by using the waved washer
(N-13), the spring washer (N-3) and the
bolt cover (N-11)
10 www.viavito.com
Step Five.
01
the handlebar post(C) by using the
curved washer (N-4), the spring washer
(N-3) and the Allen bolt (N-5)
02 Feed the upper computer cable
and hand pulse cable out from the
handlebar post and push the cover
(O) into position
Altri manuali per setry
1
Indice
Altri manuali Viavito Cyclette
