Vibradorm VFF/CDL-BF-11 Manuale utente

For adjustable beds with a
VIBRADORM dual drive
V-MAT-Basic with memory
function and LED night
light module.
Radio remote control
VFF/CDL-BF-11
with Bluetooth-Technology
Operating Instructions

2
Foreword
Revision history
Version Date
1.0 2 3.07.2019
Change
First edition
In your own interest
Read these operation instructions and
keep them in a safe place. Observe the
safety instructions.
Disclaimer
We would like to point out that the
company VIBRADORM GmbH will not
assume any liability for injuries or damage
that occurs as a result of
■ non-observance of these operating
instructions,
■ changes to the product that were not
approved by VIBRADORM GmbH, or
■ the use of spare parts not
manufactured or released by
VIBRADORM GmbH, or
■ plug-in parts not manufactured or
released by VIBRADORM GmbH.
Manufacturer's address
VIBRADORM GmbH
Relystraße 38
64720 Michelstadt
GERMANY
Tel.: ++49 (0)6061 / 94 44 0
Fax: ++49 (0)6061 / 94 44 10
http://www.vibradorm.de
E-Mail: [email protected]
Foreword

3
Table of contents
Foreword 2
Revision history 2
In your own interest 2
Disclaimer 2
Manufacturer's address 2
Table of contents 3
1 General . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1 How to use these instructions . . . . . . . . 4
1.2 Information about these operating
instructions. . . . . . . . . . . . . . . . . . . . . . . . 4
2 Safety instructions . . . . . . . . . . . . . . . . 4-7
2.1 Intended use. . . . . . . . . . . . . . . . . . . . . . 5
2.2 Improper use. . . . . . . . . . . . . . . . . . . . . . 5
2.3 Specific safety instructions . . . . . . . . . . 5
2.4 Information about radio operation . . . 6
2.5 Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.6 Operating instructions of the bed
manufacturer . . . . . . . . . . . . . . . . . . . . . 7
Remote control &
dual drive overview . . . . . . . . . . . . . . 8-9
3 Commissioning . . . . . . . . . . . . . . . . 10-11
3.1 Inserting the batteries . . . . . . . . . . . . . 10
3.2 Teach-in process . . . . . . . . . . . . . . . . . 10
4 Operation . . . . . . . . . . . . . . . . . . . . 11-12
4.1 Status LED . . . . . . . . . . . . . . . . . . . . . . . 11
4.2 Background illumination . . . . . . . . . . . 11
4.3 Bed adjustment . . . . . . . . . . . . . . . . . . 11
emory positions . . . . . . . . . . . . . . . . . 114.4 M
4.5 Night light function. . . . . . . . . . . . . . . . 12
4.6 Torch function. . . . . . . . . . . . . . . . . . . . 12
5 Reset to factory settings . . . . . . . . . . . 13
6 Malfunctions / troubleshooting . . . . . 14
7 Technical data . . . . . . . . . . . . . . . . . . . 14
8 Maintenance and cleaning . . . . . . . . 14
9 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . 15
10 Attachment . . . . . . . . . . . . . . . . . . . . . 16
10.1 Operation via a smartphone
or tablet PC. . . . . . . . . . . . . . . . . . . . . . 16
Table of contents

4
1 General
1.1 How to use these instructions
Symbols used
Indicates about a dangerous situation;
potential consequences: death or
serious injury.
Potentially dangerous situation;
potential consequences: slight or
minor injuries.
General information;
Information that is important for the
function or operation, or that will
facilitate operation or assembly.
1.2 Information about these
operating instructions
These operating instructions serve the
successful and safe use of the radio
remote control VFF/CDL-BF-11.
The operating instructions will help you
to avoid dangers, and minimise repairs
and failures.
These operating instructions were
compiled with great care. No liability
will be assumed for the accuracy and
completeness of the data, images or
drawings, unless prescribed by law.
Subject to technical amendments that
serve continuous product improve-
ment without prior announcement!
2 Safety instructions
The radio remote control VFF/CDL-BF-11
can be used by children aged 8 and
upwards and by persons with limited
physical, sensory or mental aptitude or
lack of experience and/or knowledge if
they are supervised or have received
instruction from a person responsible for
their safety as to how the radio re m o t e
control is used and the associated risks.
Children may not play with the radio
remote control.
Children may not clean or service the
device without supervision.
General
Warning
Caution

5
Safety instructions
2.1 Intended usage
The radio remote control VFF/CDL-BF-
11 is designed for:
• operating VIBRADORM dual drives.
• use within the home
The radio remote control VFF/CDL-BF-
11 is only designed for the designated
purpose. Any other use is deemed
improper and can lead to accidents
or the destruction of the device.
This will lead to immediate invalidation
of the warranty and any warranty
claims by the end user with respect to
the manufacturer.
2.2 Improper usage
Please observe the following
information about improper usage.
The radio remote control VFF/CDL-BF-
11 may not be used
• with a medical product or installed
in a medical product,
• in an environment in which there
are inflammable or explosive gases
or vapours (e.g. anaesthetics),
• in damp environments,
• outdoors,
• in applications that are washed in
mechanical washing systems,
• for lifting and lowering of loads, in
craftsman or industrial areas or in
the household.
2.3 Specific safety instructions
The following safety instructions serve
to protect you, third parties and the
equipment, and must therefore be
adhered to strictly.
Operating environment
• The radio remote control may not
come into direct contact with damp
or water. The radio remote control is
only suitable for dry indoor rooms.
• When switching from cold to warm
environments, allow the radio
remote control time to adjust to the
Caution
Warning
Caution

6
Safety instructions
ambient temperature for a few hours
before use, otherwise it may suffer
damage as a result of condensation.
• Never use the remote control close
to devices that emit strong
electromagnetic fields. This could
impact on its function.
• Also avoid environments exposed to
direct sunlight, high temperatures,
cold, damp or wet.
The device
• Check first whether the housing is
damaged. If this is the case, do not
use the remote control but contact
the supplier for a replacement.
• For safety reasons, it is prohibited to
make any unauthorised changes to
the remote control. Do not open the
housing of the remote control,
except to change the batteries,
otherwise the warranty will become
void.
Operation
• The remote control only functions
correctly if it is commissioned and
used properly.
• To avoid injury, never allow children
or other vulnerable persons to use
the remote control unsupervised.
• Radio signals can pass through walls
and ceilings!. Only use the remote
control in the room in which the
adjustable bed is located!
2.4 Information about radio
operation
Please note that the transmission
range depends on the local
conditions. It may impact on other
devices operated by radio, for
instance WLANs, cordless phones or
microwave ovens.
Transmission / receiving frequency:
2.4GHz ISM band.
Devices according to the standard of
the Bluetooth SIG transmit as Short
Range Devices (SRD) in a license-free
ISM band (Industrial, Scientific and
Medical band) between 2.402 GHz
and 2.480 GHz.
This product is designed and
manufactured according to the
Standard DIN EN 60335-1 (Safety of

7
Safety instructions
Household and similar Electrical App-
liances) and carries the CE mark. If
you use a Medical Device such as
pacemaker you may wish to contact
your specialist to answer any
questions.
2.5 Batteries
• Keep batteries out of reach of
children.
• Batteries must not be thrown into
fire, short circuited, taken apart, or
charged. Danger of explosion!
• Batteries contain harmful acids.
Replace weak batteries as soon as
possible to avoid battery leakage.
• Never use old and new batteries
together or mix batteries of different
types.
Handling leaking batteries
• Chemically resistant protective
gloves and goggles should be worn
when replacing leaking batteries!
• Avoid touching leaking batteries
with your bare hands as far as
possible.
• Should you come into contact with
leaked battery components, wash
your hands thoroughly.
• Remove any electrolyte residues by
damp wiping. Wash any clothes that
come into contact with the
electrolyte.
2.6 Operating instructions of the
bed manufacturer
Also observe the safety notes in the
operating instructions of the bed
manufacturer!
Depending on the design or model of
the adjustable bed, hazards to the
user may occur that are not covered
by this manual.
These installation instructions do not
contain all information required to
safely operate the end product,
because the bed manufacturer will
carry out a risk assessment for the
adjustable bed. This will then be used
as the basis for the safety notices in its
operating instructions.
Caution

8
Remote control & dual drive overview
lll
mmm
ttt
sss
111222
333444
555666
777888
999ßßß
qqq
bbb
nnn

9
s Status LED
1 All drives up
2 All drives down
3 Back drive up
4 Back drive down
5 Leg drive up
6 Leg drive down
7 Memory position 1
8 Memory position 2
9 Save memory positions
ß LED night light bar on/off/dim
q Torch LED on/off
t Torch LED
b Battery compartment
l Teach-in button
n LED night light module
m Socket / Plug of the LED night light
module

10
Commissioning
3 Commissioning
3.1 Inserting the batteries
Insert the supplied batteries (2x 1,5V
AAA LR03) into the battery compart-
ment as shown in the picture. Ensure
that the batteries are inserted in the
right direction (+/-)!
Once the batteries have been inser-
ted, close the battery compartment
lid again and the radio remote control
is operational.
3.2 Teach-in process
A teach-in process must be carried
out to enable the radio remote
control and the dual drive V-MAT-
Basic to communicate with each
other.
This teach-in process is normally
carried out by the manufacturer and
you can skip this step.
After the batteries inserted, have been
the Status LED and the Keypad illu-s
mination are flashing.
• Briefly press any button.
• The status LED and the keypad s
illumination flash alternately.
• Press button on the dual drive for l
approx. 1 s.
• The back adjustment motor moves
briefly up/down.
• The status LED goes off, the s
keypad illumination lights up
constantly.
• The teach-in process has been
completed successfully.
Indice
Altri manuali Vibradorm Telecomando


















