Vicon V960D-N312 Manuale di istruzioni

Quick User Guide V960D Series Indoor Network Camera

Warning before installation

-Power off the Network camera if it is found to be smoking or smells unusual.

-Keep the Network camera away from water. If the Network camera gets wet, power

off immediately.

-Do not place the Network camera near heat sources, such as a television or oven.

-Refer to your instruction manual for the operating temperature.

-Keep the Network camera away from direct sunlight.

-Do not place the Network camera in high humidity environments.

-Do not place the Network camera on unsteady surfaces.

-Do not touch the Network camera when there is lightning present.

-Do not disassemble the Network camera.

-Do not drop the Network camera.

-Do not insert any object into the Network camera, such as a screwdriver.

For other safety and regulation information, please refer to “User’s manual”.

1. Check Contents

No.

Item

Description

Network Camera

V960D Series (V960D-N312, V960D-N312M,

V960D-N922M, V961D-N312, V961D-N312M,

V961D-N922M, V962D-N312, V962D-N312M,

V962D-N922M,)

Software CD

User’s Manual, Utility software

Quick User Guide

This document

Accessories

Template for installation

Video monitor cable

Tapping Screw 4x30: 2pcs

Anchor: 2pcs

Tapping Screw for middle cover 3x8: 2pcs

Network extension cable

Power cable

2. Physical Description

1. Network (RJ-45 PoE supported)

2. Power (DC12V / AC24V)

3. I/O signal terminal block

-Audio In (Line in)

-Audio Out (Line Out)

-Alarm In (Dry Contact)

-Alarm Out (Relay out [2A:AC120V/DC60V])

Quick User Guide V960D Series Indoor Network Camera

4. Micro SD card (SDHC supported)

5. Reset Button

6. Status LED

7. Video output for service monitor

3. Making Connection

1. If you have external devices such

as sensor or alarms, make connection

from connectors

2. Connect Ethernet cable to make

connection to the network hub.

3. Connect power cable to the camera.

When you use PoE function, you don’t

need to connect power.

Quick User Guide V960D Series Indoor Network Camera

4. Assign IP address

Default setting is set to “DHCP” and “UPnP” function is set to ON. If your network

has a DHCP server and the UPnP function is enabled on your PC, you can find the

camera in “My Network”. Refer to the Multi Upgrade Tool manual for detailed

instructions.

Execute the Multi Upgrade Tool (from the Installation CD); it will search cameras on

the network automatically.

1) After the list of detected devices appears, select the camera you are trying to

configure.

2) Select the Network type as Static or DHCP. If Static is selected, enter all of the

network information for your camera.

3) Select the “Change IP Address” button. The message “Do you want to change IP

address?” will display; select “Yes” from the pop-up window.

4) Check the Type as Static or DHCP from the list.

Then double click the camera in the list; Internet Explorer® will open

automatically.

Quick User Guide V960D Series Indoor Network Camera

5. Web Browser Connection

Note: The Network camera supports Internet Explorer® 7 or above.

Please check version of your browser and update it if necessary.

When you first access the camera you need to download and install an

Active X control from the camera to display a Live image.

Default User and Password are set to “ADMIN” and “1234”. Please type in

the user ID and password to connect the network camera.

Note: By Default the cameras come with “Installation Mode” set to “ON” to

enable Analog output. Additionally, all installation setup must be done prior to

the camera being used with a VMS, including ViconNet; the VMS forces the

Installation Mode to OFF. You must turn installation mode off to use 720p or

1080p streaming.

For further information on setup, refer to User’s manual on software CD.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Vicon Telecamera di sicurezza

Vicon

Vicon V922B-W551-A1 Manuale utente

Vicon

Vicon I-Onyx MPD-955DN-O Manuale utente

Vicon

Vicon ROUGHNECK V-CELL-HD-A Manuale utente

Vicon

Vicon V992-N Manuale utente

Vicon

Vicon V960-N Series Manuale di istruzioni

Vicon

Vicon Surveyor 4 Manuale utente

Vicon

Vicon V894MSH Manuale utente

Vicon

Vicon ROUGHNECK V910 Manuale utente

Vicon

Vicon V15CCM-IR-2 Series Rouchneck Manuale utente

Vicon

Vicon VC-3000-DSP Manuale utente

Vicon

Vicon VC-600W Manuale utente

Vicon

Vicon HPOE-100 Manuale utente

Vicon

Vicon V661D-312N-1 Istruzioni operative

Vicon

Vicon I-Onyx VN-957DN Manuale utente

Vicon

Vicon VC-620 Manuale utente

Vicon

Vicon V662V-Series Istruzioni operative

Vicon

Vicon V9317H Series Manuale utente

Vicon

Vicon V9360-1 Manuale utente

Vicon

Vicon SurveyorVFT Manuale utente

Vicon

Vicon V1008-WIR-180 Manuale utente

Vicon

Vicon Roughneck Pro V2000D Series Manuale utente

Vicon

Vicon surveyor 1000 Manuale utente

Vicon

Vicon XX075-10 Manuale utente

Vicon

Vicon SN240D Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente

Lumens

Lumens VC-A50PNW Manuale utente