Videoseven PD480C Manuale utente
English
EN-1
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in residential installation. This
equipment generates, uses and can radiate radio frequency energy and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, detectable by turning the equipment in question off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna
Increase the distance between the equipment and the receiver
Connect the equipment to an outlet on a different circuit than that which the receiver
is connected to
Or consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference that may cause undesired operation.
EN-2
Safety Instructions
Read all of these instructions before you operate your projector and save for future
reference.
1. Check that the operating voltage of your unit is identical with the voltage of your
local power supply.
2. Should any liquid or solid object fall into the cabinet, unplug the unit and have it
checked by the qualified personnel before operating it further.
3. Do not attempt to service this product yourself, as opening or removing covers
may damage the components inside and will void your warranty.
4. Do not place this product on an unstable cart, stand, or table. The product may fall,
causing serious damage to the product.
5. Unplug the unit from the wall socket if it is not to be used for several days. To
disconnect the cord, pull it out by the plug. Never pull the cord itself.
6. The wall socket should be near the unit and easily accessible.
7. Do not place the projector where the cord can be stepped on as this may result in
fraying or damage to the lead or the plug. Be alert to tripping hazards.
8. Never look into the projector lens when the lamp is switched on as the bright light
can damage your eyes. Never let children look into the lens when it is on.
9. Do not place your hand or objects near the ventilation holes. The air coming out is hot.
10. Never open any covers on the projector except the lamp cover.Dangerous electrical
voltages inside the projector can cause severe injury. Except as specifically directed
in this User's Manual, do not attempt to service this product yourself. Refer all
servicing to qualified service personnel.
11. Unplug the projector from the wall socket before cleaning. Use a damp cloth for
cleaning the projector housing. Do not use liquid or aerosol cleaners.
12. Keep the plastic packing materials (from the projector, accessories and optional
parts) out of the reach of children as these bags may result in death by suffocation.
Be particularly careful around the small children.
English
EN-3
13. For ventilation reasons, the fan continues to operate after the projector has been
powered off. Please do not unplug the power cord until the fan stops.
14. The projector is equipped with ventilation holes (intake) and ventilation holes
(exhaust). Do not block or place anything near these slots, or internal heat build-up
may occur, causing picture degradation or damage to the projector.
15. When you replace the projector lamp, never touch the new bulb with your bare
hands. The invisible residue left by the oil on your hands may shorten the bulb life.
Use lint-free gloves or finger cots are recommended.
16. The product should be situated away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that produce heat.
17. Do not overload wall outlets, extension cords, or integral convenience receptacles
as this can result in a risk of fire or electric shock.
18. Earth wire should be connected. If the earth wire is not connected, there is a
possible danger of electric shock caused by the current leakage.
19. Do not use too many plugs on the Mains multi-outlet.
20. Do not touch metal parts during or soon after lamp cover will remain very hot!
EN-4
Notes on AC Power Cord
AC Power Cord must meet requirement of country where you use a projector. Confirm
an AC plug type with graphics below and proper AC Power Cord must be used. If
supplied AC Power Cord does not match your AC outlet, contact your sales dealer.
This projector is equipped with a grounding type AC line plug. Make sure that your
outlet fits the plug. Do not defeat the safety purpose of this grounding type plug. We
highly recommend using a video source device also equipped with a grounding type
AC line plug to prevent from signal interference due to voltage fluctuation.
Ground Ground
Ground Ground
For the U.K.
For the U.S.A. and CanadaFor Australia and
Mainland China
For Continental Europe
English
EN-5
CONTENTS
Product Introduction ............................................................................................ 6
Projector Features ............................................................................................. 6
Package Contents .............................................................................................. 7
Getting to Know the Projector ............................................................................ 8
Projector Components ....................................................................................... 8
Remote Control Components ............................................................................ 11
Installation............................................................................................................ 12
Installing the Projector ...................................................................................... 12
Connecting the Projector .................................................................................. 13
Powering On/Off the Projector ........................................................................ 17
Adjusting the Projected Image .......................................................................... 18
Adjusting the Projector Zoom and Focus ......................................................... 19
Adjusting Projection Image Size ....................................................................... 19
Using the Projector ............................................................................................. 21
Control Panel ................................................................................................... 21
RemoteControl ................................................................................................ 22
Menu Options ...................................................................................................... 25
Color (Computer/Video Mode) .......................................................................... 26
Image (Computer Mode) ................................................................................... 28
Image (Video Mode) ......................................................................................... 29
Management (Computer/Video Mode) .............................................................. 30
Audio (Computer/Video Mode) ......................................................................... 31
Language ........................................................................................................ 32
Maintenance ........................................................................................................ 33
Cleaning the Lens ............................................................................................ 33
Cleaning the Projector Housing ........................................................................ 33
Replacing the Lamp .......................................................................................... 34
Technical Specifications ..................................................................................... 36
Appendix .............................................................................................................. 37
Indicator Messages ......................................................................................... 37
Preset Signals ................................................................................................. 38
Troubleshooting...................................................................................................40
EN-6
Product Introduction
Projector Features
The projector integrates high-performance optical engine projection and a user-friendly
design to deliver high reliability and ease of use.
The projector offers the following features:
Single chip 0.55" Texas Instruments DLP™ technology
480p (854 x 480 pixels)
Compact size, light weight for portability
1.2x manual zoom lens
Auto image re-sizing (Auto-Sync.) to 854 x 480 full screen with scaling compression
compatibility for VGA, SVGA, XGA*and SXGA*.
State-of-the-art motion adaptive hardware deinterlacing with 3:2 pull down
Compatibility with Macintosh®computers
Compatibility withNTSC, PAL, SECAM, and HDTV
Multi-function remote control
D-Sub 15-pin cable for analog video connectivity
User-friendly, multi-language on-screen display (OSD)
Advanced electronic keystone correction
4:3/16:9 aspect ratio that supports various DVD formats
Best for home entertainment- video games and home theater
* means compressed.
English
EN-7
Package Contents
When you unpack the projector, make sure you have all these components:
Save the original shipping carton and packing material; they will come
in handy if you ever to ship your unit. For maximum protection, repack
your unit as it was originally packed at the factory.
Accessories and components may vary by retailer and region.
Lithium battery is loaded in the remote control. Remove the transparent
insulation tape by pulling it before use.
Projector with Lens Cap AC Power Cord VGA Cable (D-SUB to D-SUB)
S-Video Cable Composite Video Cable Audio Cable
VGA (D-SUB) to
HDTV (RCA) Cable
Projector
Carrying Case User’s Manual
Remote Control (IR)
with Lithium battery
Optional Accessory:
Quick Start Guide
EN-8
Getting to Know the Projector
Projector Components
Front View
1Lens cap
2Lens cap strap
3Lens
4Ventilation holes (intake)
5Zoom ring
123
6
7
8
9
10 4
5
6 Focus ring
7 Control panel
8 Speaker
9 Front IR remote control sensor
10 Ventilation holes (exhaust)
English
EN-9
Rear View
1 Interface connector
2Rear IR remote control sensor
3Security lock receptacle
4AC power socket
5Ventilation holes (intake)
6Foot adjuster
7Foot adjuster button
Bottom View
1Lamp cover
1
2
3
4 567 6 7
1
EN-10
Control Panel
LED
1POWER (Power LED indicator)
2LAMP (Lamp LED indicator)
Button
1(power)
2MENU
3KEYSTONE S/T
4AUTO X
5Four direction buttons
6SOURCE W
Interface Connector
1
23
6
5
1
2
4
1USB connector
This connector is used for engineering purpose.
2AUDIO input connector
Connect an audio output from video equipment to this jack.
3COMPUTER IN (D-SUB) connector
Connect image input signal (analog) to this connector.
4S-VIDEO connector
Connect S-Video output from video equipment to this jack.
5VIDEO connector
Connect composite video output from video equipment to this jack.
1 2 3 4
5
Indice
Altri manuali Videoseven Proiettore
