Viega 6176 Manuale utente
Model Year built:
6176 from 06/2015
en_INT
Citaplex drain/overflow
Instructions for Use
Citaplex drain/overflow 2 from 15
Table of contents
1About these instructions for use 4
1.1 Target groups 4
1.2 Labelling of notes 4
1.3 About this translated version 5
2Product information 6
2.1 Intended use 6
2.1.1 Areas of use 6
2.2 Product description 7
2.2.1 Overview 7
2.2.2 Technical data 8
3Handling 9
3.1 Assembly information 9
3.1.1 Mounting conditions 9
3.1.2 Installation dimensions 9
3.1.3 Required tools and materials 9
3.2 Assembly 10
3.2.1 Mounting overflow 10
3.2.2 Mounting the drain 11
3.2.3 Connecting overflow and drain 11
3.2.4 Connecting the wastewater system 12
3.2.5 Mounting equipment set 13
3.2.6 Leakage test 14
3.3 Maintenance 14
3.4 Disposal 15
Table of contents
Citaplex drain/overflow 3 from 15
1 About these instructions for use
Trade mark rights exist for this document, further information can be
found at
viega.com/legal
.
1.1 Target groups
The information in this instruction manual is directed at the following
groups of people:
nHeating and sanitary professionals and trained personnel
nOperators
nConsumers
It is not permitted for individuals without the abovementioned training or
qualification to mount, install and, if required, service this product. This
restriction does not extend to possible operating instructions.
The installation of Viega products must take place in accordance with
the general rules of engineering and the Viega instructions for use.
1.2 Labelling of notes
Warning and advisory texts are set aside from the remainder of the text
and are labelled with the relevant pictographs.
DANGER!
This symbol warns against possible life-threatening injury.
WARNING!
This symbol warns against possible serious injury.
CAUTION!
This symbol warns against possible injury.
NOTICE!
This symbol warns against possible damage to property.
Notes give you additional helpful tips.
About these instructions for use
Citaplex drain/overflow 4 from 15
1.3 About this translated version
This instruction for use contains important information about the choice
of product or system, assembly and commissioning as well as intended
use and, if required, maintenance measures. The information about the
products, their properties and application technology are based on the
current standards in Europe (e. g. EN) and/or in Germany
(e. g. DIN/DVGW).
Some passages in the text may refer to technical codes in Europe/
Germany. These should serve as recommendations in the absence of
corresponding national regulations. The pertinent national laws, stand-
ards, regulations and guidelines, as well as other technical guidelines,
have priority over German/European guidelines in this manual: The
information is not binding for other countries and territories and should,
as mentioned, be considered as support.
About these instructions for use
Citaplex drain/overflow 5 from 15
2 Product information
2.1 Intended use
2.1.1 Areas of use
NOTICE!
Risk of damage due to unsuitable liquids.
To avoid damaging the drain, only introduce the following
liquids:
– Liquids with a pH-value higher than 4
– typical household wastewater with temperatures up to
95 °C
The Citaplex drain/overflow is a combined drain and overflow for bath-
tubs with a 52 mm drain hole.
Please note, this model has no odour trap. A separate
odour trap must be installed to complete the mounting.
The drain/overflow is suitable for standard bathtubs with the drain on
the head end.
Detailed information regarding all bathtub models and the corre-
sponding Viega drains / overflows can be found in the catalogue or on
the Internet.
Product information
Citaplex drain/overflow 6 from 15
2.2 Product description
2.2.1 Overview
1
2
3
4
6 5789
11 12 13 14 15 16
10
Fig. 1: Component overview
1 - valve plug with fixing chain
2 - fixing screw
3 - valve top
4 - double seal
5 - drain unit
6 - seal
7 - sliding ring
8 - union nut
9 - overflow pipe
10 - sleeve
11 - overflow unit
12 - profile seal
13 - fixing flange
14 - rosette
15 - fixing screw
16 - chain
Product information
Citaplex drain/overflow 7 from 15
2.2.2 Technical data
Drainage capacity (at an accumu-
lation height of 300 mm)
The drainage capacity depends
on the odour trap used.
Overflow capacity (at an accumu-
lation height of 60 mm)
The overflow capacity depends on
the odour trap used.
Diameter of bathtub drain hole 52 mm
Threaded drain unit 1½inch
Length 120–260 mm
Height 180–440 mm
Dimensions and installation depth
ÄChapter 3.1.2 „Installation
dimensions“ on page 9
Product information
Citaplex drain/overflow 8 from 15
3 Handling
3.1 Assembly information
3.1.1 Mounting conditions
The following requirements exist for the mounting of the drain / over-
flow:
nThe bathtub is installed.
nThe drainage line is installed all the way to the bathtub.
nThe underside of the bathtub is accessible.
3.1.2 Installation dimensions
Ø70
1 ˝
120 - 240
70 180 - 400
Fig. 2: Dimensional drawing
3.1.3 Required tools and materials
The following tools are required for mounting:
nfine-toothed saw
nflat-blade screwdriver
Tool
Handling
Citaplex drain/overflow 9 from 15
The following material must be purchased separately and must be avail-
able during mounting:
nodour trap
3.2 Assembly
3.2.1 Mounting overflow
Proceed as follows to the mounting of the overflow:
Push the rubber sleeve onto the pipe of the overflow unit.
The lower edge must be flush with the edge of the overflow pipe.
Fit profile seal in the overflow unit.
Hold the overflow unit on the overflow opening of the bathtub from
the outside.
Screw the fixing flange into the overflow unit by hand.
Pliers or other tools may damage the fixing flange. Only turn the
fixing flange by hand.
Material
Handling
Citaplex drain/overflow 10 from 15
Indice
Altri manuali Viega Prodotto idraulico
Viega
Viega ProPress XL Manuale utente
Viega
Viega 8159 Manuale utente
Viega
Viega Multiplex Trio F Series Manuale utente
Viega
Viega Eco Plus Manuale utente
Viega
Viega Smart Loop 2976.1ZL Foglio di istruzioni
Viega
Viega Prevista Dry Plus 8570.35 Manuale utente
Viega
Viega Prevista Dry Manuale utente
Viega
Viega Eco Plus Manuale utente
Viega
Viega Multiplex Trio F Manuale utente
Viega
Viega 2241.10 Manuale utente
Viega
Viega Prevista Dry 8570.31 Manuale utente
Viega
Viega Steptec 8467.3 Manuale utente
Viega
Viega Prevista Dry Manuale utente
Viega
Viega Visign for Style 20 8610.1 Manuale utente
Viega
Viega 8624.1 Manuale utente
Viega
Viega PureFlow Press Zero Lead Foglio di istruzioni
Viega
Viega 8326.65 Manuale utente
Viega
Viega 8655.11 Manuale utente
Viega
Viega Prevista Pure Manuale utente
Viega
Viega Domoplex 6929 Manuale utente
