Viega 6960 Manuale utente

Model Year built:

6960 from 01/2010

en_INT

Tempoplex Plus drain, high drainage

capacity

Instructions for Use

Tempoplex Plus drain, high drainage capacity 2 from 13

Table of contents

1About these instructions for use 4

1.1 Target groups 4

1.2 Labelling of notes 4

1.3 About this translated version 5

2Product information 6

2.1 Intended use 6

2.1.1 Areas of use 6

2.2 Product description 6

2.2.1 Overview 6

2.2.2 Technical data 7

3Handling 8

3.1 Assembly information 8

3.1.1 Mounting conditions 8

3.1.2 Installation dimensions 8

3.2 Assembly 8

3.2.1 Mounting the drain 8

3.2.2 Connecting the wastewater system 11

3.2.3 Leakage test 11

3.3 Maintenance 11

3.4 Cleaning the drain 12

3.5 Disposal 13

Table of contents

Tempoplex Plus drain, high drainage capacity 3 from 13

1 About these instructions for use

Trade mark rights exist for this document, further information can be

found at www.viega.com/legal-notices.

1.1 Target groups

The information in this instruction manual is directed at the following

groups of people:

nHeating and sanitary professionals and trained personnel

nOperators

nConsumers

It is not permitted for individuals without the abovementioned training or

qualification to mount, install and, if required, service this product. This

restriction does not extend to possible operating instructions.

The installation of Viega products must take place in accordance with

the general rules of engineering and the Viega instructions for use.

1.2 Labelling of notes

Warning and advisory texts are set aside from the remainder of the text

and are labelled with the relevant pictographs.

DANGER!

This symbol warns against possible life-threatening injury.

WARNING!

This symbol warns against possible serious injury.

CAUTION!

This symbol warns against possible injury.

NOTICE!

This symbol warns against possible damage to property.

Notes give you additional helpful tips.

About these instructions for use

Tempoplex Plus drain, high drainage capacity 4 from 13

1.3 About this translated version

This instruction for use contains important information about the choice

of product or system, assembly and commissioning as well as intended

use and, if required, maintenance measures. The information about the

products, their properties and application technology are based on the

current standards in Europe (e. g. EN) and/or in Germany

(e. g. DIN/DVGW).

Some passages in the text may refer to technical codes in Europe/

Germany. These should serve as recommendations in the absence of

corresponding national regulations. The pertinent national laws, stand-

ards, regulations and guidelines, as well as other technical guidelines,

have priority over German/European guidelines in this manual: The

information is not binding for other countries and territories and should,

as mentioned, be considered as support.

About these instructions for use

Tempoplex Plus drain, high drainage capacity 5 from 13

2 Product information

2.1 Intended use

2.1.1 Areas of use

NOTICE!

Risk of damage due to unsuitable liquids.

To avoid damaging the drain, only introduce the following

liquids:

– Liquids with a pH-value higher than 4

– typical household water with a maximum temperature of

95 °C

The Tempoplex Plus drain is a drain with odour trap and a ball joint

drain (DN 50) for shower trays with 90 mm drain holes. The drain is suit-

able for shallow shower trays and provides a high drainage capacity.

Detailed information regarding all shower tray models and the corre-

sponding Viega drains can be found in the catalogue or on the Internet.

2.2 Product description

2.2.1 Overview

Fig. 1: Components

1 - cover plate

2 - immersion pipe

3 - fixing flange with screws

4 - seal

5 - odour trap

6 - ball joint drain pipe (DN 50)

Product information

Tempoplex Plus drain, high drainage capacity 6 from 13

2.2.2 Technical data

Drainage capacity at an accumulation height of

15 mm

0.85 l/s

Diameter drain hole 90 mm

DN (nominal diameter) drain support 50 mm

Height 90 mm

Dimensions and installation depth

ÄChapter 3.1.2 „Installation dimensions“ on page 8

Water head seal 50 mm

Product information

Tempoplex Plus drain, high drainage capacity 7 from 13

3 Handling

3.1 Assembly information

3.1.1 Mounting conditions

The following requirements exist for the mounting of the drain:

nThe shower tray is installed.

nThe drainage line is installed all the way to the shower tray.

nThe underside of the shower tray is accessible.

nThe drainage capacity is sufficient at an accumulation height of

15 mm.

3.1.2 Installation dimensions

Fig. 2: Dimensional drawing

3.2 Assembly

3.2.1 Mounting the drain

If the shower tray floor is thicker than 10 mm, you must separate the

seal as follows:

Separate seal

Handling

Tempoplex Plus drain, high drainage capacity 8 from 13

Cut the seal into two pieces at the sealing bead.

Proceed as follows to mount the drain:

Place the seal on the sealing surface of the drain and push into the

holding groove.

Position the body of the drain unit with seal under the shower tray.

Push the upper part of the seal through the drain hole.

INFO! If one of the seals has to be separated, place one part

of the seal on the drain casing and the other part in the drain

hole.

Insert seal

Secure drain

Handling

Tempoplex Plus drain, high drainage capacity 9 from 13

Insert screws by hand.

NOTICE! Only use a screwdriver, not a cordless screwdriver.

Tighten screws evenly.

Insert immersion pipe into the odour trap.

Press the cover plate onto the three fixing points.

Handling

Tempoplex Plus drain, high drainage capacity 10 from 13

Indice

Altri manuali Viega Prodotto idraulico

Viega

Viega Eco Plus Manuale utente

Viega

Viega PureFlow Press Zero Lead Foglio di istruzioni

Viega

Viega 2241.10 Manuale utente

Viega

Viega Prevista Dry 8573 Manuale utente

Viega

Viega Profipress G XL Manuale utente

Viega

Viega Eco Plus Manuale utente

Viega

Viega Grundfix Plus Manuale utente

Viega

Viega Eco Plus Manuale utente

Viega

Viega 8317 Manuale utente

Viega

Viega Prevista Dry 8535.32 Manuale utente

Viega

Viega Prevista Dry 8522 Manuale utente

Viega

Viega ProPress PEX Press x Foglio di istruzioni

Viega

Viega 4987.2 Manuale utente

Viega

Viega 8139 Manuale utente

Viega

Viega 4956.4 Manuale utente

Viega

Viega 8142 Manuale utente

Viega

Viega ProPress XL Manuale utente

Viega

Viega 8502 Manuale utente

Viega

Viega 8351.1 Manuale utente

Viega

Viega Prevista Pure Manuale utente

Viega

Viega Prevista Dry WC Manuale utente

Viega

Viega Eco Plus Manuale utente

Viega

Viega Prevista 8524.19 Manuale utente

Viega

Viega 6161.52 Manuale utente

Manuali Prodotto idraulico popolari di altre marche

Weka

Weka 506.2020.00E Istruzioni operative

Kohler

Kohler K-6228 Istruzioni per il montaggio

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Manuale utente

American Standard

American Standard DetectLink 6072121 Manuale utente

Uponor

Uponor Contec TS Manuale utente

Pfister

Pfister Selia 49-SL Manuale utente

Fortis

Fortis VITRINA 6068700 Manuale utente

Fortis

Fortis MILANO 78211JS Manuale utente

Kohler

Kohler K-12183 Istruzioni per il montaggio

Maxxus

Maxxus MX-M206-01 Manuale utente

Moen

Moen 5922 Series Manuale utente

Kohler

Kohler Centerset K-15240 Istruzioni per il montaggio

Sanela

Sanela Lema SLP 59RB Manuale utente

Elkay

Elkay EDF15AC Manuale di installazione

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Manuale

baliv

baliv WT-140 Manuale utente

Kohler

Kohler Mira Eco Manuale operativo

BELLOSTA

BELLOSTA romina 0308/CC Manuale utente