Viega Multiplex Trio F Manuale utente

for water inlet through the drain unit

Model Year built:

6145.5 from 06/2015

en_INT

Multiplex Trio F drain/overflow functional

unit

Instructions for Use

Multiplex Trio F drain/overflow functional unit 2 from 25

Table of contents

1About these instructions for use 4

1.1 Target groups 4

1.2 Labelling of notes 4

1.3 About this translated version 5

2Product information 6

2.1 Intended use 6

2.1.1 Areas of use 6

2.2 Product description 6

2.2.1 Overview 6

2.2.2 Technical data 8

2.3 Accessories 8

3Handling 9

3.1 Assembly information 9

3.1.1 Mounting conditions 9

3.1.2 Installation dimensions 11

3.1.3 Required tools and materials 11

3.2 Assembly 12

3.2.1 Connect and mount pipe interrupter 12

3.2.2 Mounting overflow 14

3.2.3 Mounting the drain 15

3.2.4 Connecting overflow and drain 16

3.2.5 Connecting the wastewater system 17

3.2.6 Connecting the inlet 18

3.2.7 Mounting equipment set 19

3.2.8 Leakage test 20

3.3 Control 20

3.4 Simple maintenance and cleaning pipe 21

3.4.1 Maintenance 21

3.4.2 Cleaning pipe interrupter 22

3.4.3 Cleaning the drain 23

3.5 Disposal 25

Table of contents

Multiplex Trio F drain/overflow functional unit 3 from 25

1 About these instructions for use

Trade mark rights exist for this document, further information can be

found at www.viega.com/legal-notices.

1.1 Target groups

The information in this instruction manual is directed at the following

groups of people:

nHeating and sanitary professionals and trained personnel

nOperators

nConsumers

It is not permitted for individuals without the abovementioned training or

qualification to mount, install and, if required, service this product. This

restriction does not extend to possible operating instructions.

The installation of Viega products must take place in accordance with

the general rules of engineering and the Viega instructions for use.

1.2 Labelling of notes

Warning and advisory texts are set aside from the remainder of the text

and are labelled with the relevant pictographs.

DANGER!

This symbol warns against possible life-threatening injury.

WARNING!

This symbol warns against possible serious injury.

CAUTION!

This symbol warns against possible injury.

NOTICE!

This symbol warns against possible damage to property.

Notes give you additional helpful tips.

About these instructions for use

Multiplex Trio F drain/overflow functional unit 4 from 25

1.3 About this translated version

This instruction for use contains important information about the choice

of product or system, assembly and commissioning as well as intended

use and, if required, maintenance measures. The information about the

products, their properties and application technology are based on the

current standards in Europe (e. g. EN) and/or in Germany

(e. g. DIN/DVGW).

Some passages in the text may refer to technical codes in Europe/

Germany. These should serve as recommendations in the absence of

corresponding national regulations. The pertinent national laws, stand-

ards, regulations and guidelines, as well as other technical guidelines,

have priority over German/European guidelines in this manual: The

information is not binding for other countries and territories and should,

as mentioned, be considered as support.

About these instructions for use

Multiplex Trio F drain/overflow functional unit 5 from 25

2 Product information

2.1 Intended use

2.1.1 Areas of use

NOTICE!

Risk of damage due to unsuitable liquids.

To avoid damaging the drain, only introduce the following

liquids:

– Liquids with a pH-value higher than 4

– typical household wastewater with temperatures up to

95 °C

The Multiplex Trio drain/overflow is a combined inlet, drain and overflow

with odour trap for bathtubs with a 52 mm drain hole. The inlet flows

particularly quietly through the overflow opening.

The drain/overflow is suitable for bathtubs with a middle connection.

Detailed information regarding all bathtub models and the corre-

sponding Viega drains / overflows can be found in the catalogue or on

the Internet.

2.2 Product description

2.2.1 Overview

The following components are included in the scope of delivery of the

Multiplex Trio F drain / overflow:

Product information

Multiplex Trio F drain/overflow functional unit 6 from 25

10 9111212 1311101415

17 18 19 20 21 22 23 24

Fig. 1: Component overview

1 - mounting aid

2 - cover plate

3 - fixing screws

4 - inlet element

5 - screw-in valve (1 x 22.5 mm, 1 x 30 mm)

6 - seal

7 - profile seal

8 - connection elbow

9 - drain elbow

10 - union nut

11 - sliding ring

12 - seal

13 - drain unit with odour trap

14 - overflow pipe

15 - Bowden cable

16 - sleeve

17 - overflow unit

18 - profile seal

19 - O-ring

20 - fixing flange

21 - rotatable rosette

22 - pipe interrupter casing

23 - top of the pipe interrupter

24 - pipe interrupter rosette

Product information

Multiplex Trio F drain/overflow functional unit 7 from 25

2.2.2 Technical data

Drainage capacity (at an accumu-

lation height of 300 mm)

0.85 l/s

Overflow capacity (at an accumu-

lation height of 60 mm)

0.63 l/s

Inlet capacity (at 0.25 MPa

(2.5 bar))

20 l/min

Diameter of bathtub drain hole 52 mm

DN (nominal diameter) drain

socket

40 / 50 mm

Length of Bowden cable 725 mm

Length 130–370 mm

Height 180–480 mm

Dimensions and installation depth

ÄChapter 3.1.2 „Installation

dimensions“ on page 11

Water seal level 50 mm

2.3 Accessories

The accessories shown here are not included in the scope

of delivery. If required, it must be purchased separately.

Multiplex extension set

It is possible to extend the odour trap below the bathtub in the case of

bathtubs with a very thick floor. The extension set, model 6161.7, is

available for such cases.

Optional accessories

Product information

Multiplex Trio F drain/overflow functional unit 8 from 25

3 Handling

3.1 Assembly information

3.1.1 Mounting conditions

The following requirements exist for the mounting of the drain / over-

flow:

nThe bathtub is installed.

nThe drainage line is installed all the way to the bathtub.

nThe underside of the bathtub is accessible.

Backflow situation: If a negative pressure situation should occur when

the bathtub is filled, there is a possibility that bath water may flow back

into the drinking water system.

To ensure that no bath water flows back into the drinking water system,

a pipe interrupter must be installed in the pipeline between the shut-off

fitting and the bathtub inlet.

The following schematic diagram shows what this should look like:

Pipe interrupter

Handling

Multiplex Trio F drain/overflow functional unit 9 from 25

Fig. 2: Mounting scheme with pipe interrupter

It is important that the pipe interrupter is mounted vertically, in the

direction of flow and at least 150 mm above the top edge of the

bathtub.

Observe the local standards and regulations.

Handling

Multiplex Trio F drain/overflow functional unit 10 from 25

Altri manuali per Multiplex Trio F

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Viega Prodotto idraulico

Viega

Viega Smart Loop 2976.1ZL Foglio di istruzioni

Viega

Viega 4956.4 Manuale utente

Viega

Viega Prevista Dry Manuale utente

Viega

Viega Eco Plus 8152.4 Manuale utente

Viega

Viega 6161.50 Manuale utente

Viega

Viega 8502 Manuale utente

Viega

Viega 8570.34 Manuale utente

Viega

Viega Domoplex 6929 Manuale utente

Viega

Viega Prevista Dry 8573 Manuale utente

Viega

Viega PureFlow Press Zero Lead Foglio di istruzioni

Viega

Viega Eco Plus Manuale utente

Viega

Viega 8570 Manuale utente

Viega

Viega 8330.2 Manuale utente

Viega

Viega Prevista Dry 8522.33 Manuale utente

Viega

Viega Multiplex Trio F Manuale utente

Viega

Viega Eco Plus Manuale utente

Viega

Viega 8326.16 Manuale utente

Viega

Viega Profipress S Manuale utente

Viega

Viega Multiplex Trio E 6146.221 Manuale utente

Viega

Viega MegaPress 304 Manuale utente

Viega

Viega 6161.86 Manuale utente

Viega

Viega PreVista Dry Plus 8565 Manuale utente

Viega

Viega Visign for Style 20 8610.1 Manuale utente

Viega

Viega BETTE Multiplex Trio F Manuale utente

Manuali Prodotto idraulico popolari di altre marche

Weka

Weka 506.2020.00E Istruzioni operative

Kohler

Kohler K-6228 Istruzioni per il montaggio

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Manuale utente

American Standard

American Standard DetectLink 6072121 Manuale utente

Uponor

Uponor Contec TS Manuale utente

Pfister

Pfister Selia 49-SL Manuale utente

Fortis

Fortis VITRINA 6068700 Manuale utente

Fortis

Fortis MILANO 78211JS Manuale utente

Kohler

Kohler K-12183 Istruzioni per il montaggio

Maxxus

Maxxus MX-M206-01 Manuale utente

Moen

Moen 5922 Series Manuale utente

Kohler

Kohler Centerset K-15240 Istruzioni per il montaggio

Sanela

Sanela Lema SLP 59RB Manuale utente

Elkay

Elkay EDF15AC Manuale di installazione

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Manuale

baliv

baliv WT-140 Manuale utente

Kohler

Kohler Mira Eco Manuale operativo

BELLOSTA

BELLOSTA romina 0308/CC Manuale utente