ViewPlus InkConnect Manuale utente

ViewPlus InkConnect

for VP Elite and Premier Embossers

Revision: 20160630

Table of Contents

I. Introduction ............................................................................................................................................... 2

A. Preface ................................................................................................................................................ 2

B. FCC Compliance Statement................................................................................................................. 2

C. Safety Instructions .............................................................................................................................. 3

D. Specifications ...................................................................................................................................... 4

II. Installation ................................................................................................................................................ 5

A. Items in the Box .................................................................................................................................. 5

B. Unpacking............................................................................................................................................ 5

C. Hardware Attachment ........................................................................................................................ 6

D. Software Installation........................................................................................................................... 7

E. Ink Cartridge Installation ..................................................................................................................... 8

III. Set Defaults for the Printer ...................................................................................................................... 9

A. Windows Printer Defaults................................................................................................................... 9

B. Legacy Printer Defaults ..................................................................................................................... 12

C. Service Settings ................................................................................................................................. 13

IV. Braille, Translation and Printing ............................................................................................................ 15

A. ViewPlus Tiger Software Suite .......................................................................................................... 15

B. Fonts.................................................................................................................................................. 15

C. Math and Braille................................................................................................................................ 15

D. Printing.............................................................................................................................................. 16

V. Support, Maintenance and Warranty..................................................................................................... 16

A. Training and Support Packages......................................................................................................... 16

B. Maintenance ..................................................................................................................................... 16

C. Warranty ........................................................................................................................................... 17

I. Introduction

A. Preface

ViewPlus InkConnect

For your Elite or Premier embosser

User's Manual

Congratulations on owning a ViewPlus InkConnect!

This HP Inkjet attachment for your Elite or Premier embosser allows you to easily add ink to all

your tactile documents. This manual will introduce you to the basic information regarding your

new ink attachment. The ViewPlus web site is another resource for information on your

ViewPlus product including examples, tutorials and other useful downloads.

Visit the website at: http://www.viewplus.com

Model Number VPT9034-00

B. FCC Compliance Statement

Compliance Statement (USA)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment to an outlet on a circuit different from that to which the receiver is

connected.

•Consult the dealer or an experienced radio/TV technician for help.

•FCC Warning: Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Compliance Statement (Canada)

This digital apparatus is in conformity with standard NMB-003 of Canada.

Cet appareil numérique est conforme à la norme NMB-003 du Canada.

Compliance Statement (Germany)

Bescheinigung des Herstellers/Importeurs:

Hiermit wird bescheinigt, dass der Drucker der Maschinenlärminformationsverordnung 3. GSGV,

18.01.1991 entspricht: Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäß EN27779-

1991.

Compliance Statement (Europe)

Warning: This product meets the interference requirements of EN55022. In a domestic environment, this

product may cause radio interference in which case, the user may be required to take adequate measures.

Compliance Statement (Korea)

This apparatus complies with CISPR22 requirements.

International Compliance

EN55022:2006 Emissions series

EN55024:1998 Immunity characteristics

EN61000-3-2:2006 Power line harmonics

EN61000-3-3:1995 Power line flicker

EN55024:1998 Electrostatic discharge

EN55024:1998 Radiated susceptibility

EN55024:1998 Electrical fast transient/burst

EN55024:1998 Surge

EN55024:1998 Conducted immunity

EN55024:1998 Input voltage interruptions/DIPS

Waste Electrical and Electronic Equipment (WEEE) Compliance

ViewPlus BV complies with EU Directive 2002/96 regarding WEEE recycling; upon the conclusion of the

product lifecycle, please contact ViewPlus BV concerning proper disposal.

C. Safety Instructions

Read all the following safety instructions before using the ViewPlus InkConnect for your Tiger Elite or

Premier embosser. In addition, always follow all warnings and instructions marked on the printer itself.

All safety instructions listed in your Tiger Elite and Premier series embosser manual continue to apply.

•Do not place printer with ink attachment on an unstable surface.

•Do not place printer with ink attachment near a radiator or heat source.

•Do not block or cover slots and openings in the printer's cabinet; do not insert objects through

slots.

•Use only the type of power source indicated on printer's label.

•Connect all equipment to properly grounded electrical outlets.

•Do not connect the ink attachment to any external power supply.

•Do not use frayed or damaged power cord.

•The use of an extension cord with the printer is not recommended.

•Detach printer from power during the ink attachment installation or removal process.

•Unplug printer before cleaning it; always clean it with a piece of damp cloth only.

•Do not spill liquid into printer or the ink attachment.

•Only adjust those controls that are covered by the operating instructions.

•Except as specifically explained in the user's manual, do not attempt to service the printer by

yourself.

•Detach the printer from power source and refer to qualified service personnel under the following

conditions:

oIf the power cord or plug is damaged.

oIf liquid has entered the printer or the ink attachment.

oIf printer or ink attachment have been dropped or the cabinet is damaged.

oIf the printer or ink attachment do not operate properly or exhibit a distinct change in

performance.

D. Specifications

ViewPlus InkConnect for Tiger Elite and Premier Embossers

Character Sets

Use any font at any size

Print Resolution

100 dots per inch

Print Speed

up to 110 combined print and braille characters per second in draft mode

(actual speed depends on embosser model)

Print Mechanism

Uses two HP C6602A cartridges, capacity: 15mg of ink, equals approx. 7

million characters

Paper Feed Method

Tractor feed only

Paper Size

Any tractor-fed braille or office paper 4-12 inches wide

Paper Weight

Any weight from thin computer paper (starting at 75 g/m2) to thick card

stock, photo paper or braille paper (up to 230 g/m

)

Dimensions

Length

Width

Height

Weight

8.2 inches (20.9 cm)

22.3 inches (56.7 cm)

10.0 inches (25.4 cm)

14 pounds (6.35 kg)

Connectivity

USB or LAN connection through Tiger Elite or Premier embosser

Power Consumption

Standby < 0.5 W

Average Print 90 mA @ 5 V, 300 mA @ 42 V

Computer Requirements

Operating System

Memory

Windows XP or later

256 MB or more

Embosser Requirements

Embosser type

Firmware

ViewPlus Elite or Premier embosser (if your embosser serial number is lower

than CEL2000100 for Elite 200, CEL1500100 for Elite 150, CPM1000100 for

Premier 100 or CPM0800100 for Premier 80, please contact ViewPlus

Technologies for information on upgrading your hardware)

Version 1.6.0 or later (if your embosser serial number is lower than

CEL2000100 for Elite 200, CEL1500100 for Elite 150, CPM1000100 for

Premier 100 or CPM0800100 for Premier 80, please contact ViewPlus

Technologies for a free firmware upgrade)

II. Installation

A. Items in the Box

•1 ViewPlus InkConnect for Tiger Elite and Premier embossers (embosser not included)

•1 installation CD with user's manual in html

•2 ink cartridges

•1 serial cable

B. Unpacking

•Remove the InkConnect and all its accessories from its packaging.

•Inspect the unit and its packaging for any damage.

•Save the packing material and box. If any damage occurred during shipping, most shipping

companies require the box and the packing material in order to settle the insurance claim. The

packing material must also be used to ship the InkConnect for warranty maintenance service.

•Follow the ViewPlus InkConnect Setup Instructions included with your other materials.

C. Hardware Attachment

Before attaching the InkConnect, make sure that your Elite or Premier embosser is turned off.

To attach the InkConnect to the embosser, line up the hooks on the InkConnect with the pegs in the back

of the embosser. Insert the InkConnect hooks straight into the embosser and lower the InkConnect onto

the embosser pegs.

Shows the locations of the pegs in the back of the embosser

Shows the hooks on the InkConnect

Connect the InkConnect's serial port to the embosser's serial port with the provided serial cable.

Shows the locations of the serial port connectors on the embosser and ink attachment

D. Software Installation

Please follow the easy steps that are part of your Setup Instructions to install your InkConnect driver. They

can also be found on your installation CD.

E. Ink Cartridge Installation

To install ink cartridges, rotate the back lid of the InkConnect up.

Shows the InkConnect with the back lid open

The ink cartridge carriage will be accessible through the opening. Unpack the two ink cartridges included

with the InkConnect. Carefully remove the plastic tape covering the ink cartridge nozzles without touching

the nozzles.

Shows the plastic tape covering the ink cartridge nozzles

Hold a cartridge with the nozzles pointing down (the label will be up). The flat plastic tab should be toward

you so that the writing on the label is upside down. Insert the cartridge into one of the ink cartridge

holders by placing the nozzle end in first and then pressing the side with the tab forward into the

InkConnect until the cartridge snaps into the holder.

Shows how to insert an ink cartridge

Install the second cartridge the same way, then close the lid.

The next time a print job is sent to the printer, a dialog will appear for each cartridge stating that a

cartridge change was detected. Choose the 'Yes' button on each cartridge's dialog to confirm that a new

cartridge was installed. This will ensure that the ink fill status of the cartridge is set at 100% when the

cartridge is full.

If an ink cartridge change dialog does not appear for one or both cartridges, or if you would like to reset

the ink fill status immediately without printing, the ink fill status can be set manually instead. To do this,

refer to the instructions for checking the ink fill status in Chapter III, Section C of this manual.

III. Set Defaults for the Printer

A. Windows Printer Defaults

After installation and setup are completed, changing your default settings to settings that will be used the

most often will save time in the future.

To set the default settings on your printer, enter the printer properties page for your Elite or Premier

embosser with InkConnect through Start>Printers and Faxes on Windows XP or Start>Control Panel>

Printers on Windows Vista, right click on your Elite or Premier and choose 'Printer Properties'.

To select the paper size you will most commonly use, click the 'Printing Preferences...' button on the

General tab. On the Layout tab of the Printing Preferences page, click the 'Advanced...' button. You will

now be able to select the paper size you will usually use from a drop down list. Please note that if you

later wish to use a paper size larger than what you have chosen on this page, you will need to adjust this

setting before printing.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ViewPlus Accessori per stampanti

ViewPlus

ViewPlus Tiger Box Manuale utente

Manuali Accessori per stampanti popolari di altre marche

Star Micronics

Star Micronics TSP800 Series Manuale utente

REA

REA JET HR pro 2K Manuale utente

HP Laserjet,Color Laserjet 4si Manuale utente

oliser

oliser MS 45 Manuale utente

Roland

Roland DU2-64 Istruzioni e ricette

Xerox

Xerox EFI EXP6000 Manuale utente

Canon

Canon Finisher-T1 Manuale utente

Sharp

Sharp FO-1MK Manuale utente

Labelmate

Labelmate PM-300 Manuale utente

Epson

Epson T6248 Manuale operativo

Epson

Epson OT-BZ20 Manuale utente

Canon

Canon TonerRobot EP-27 Manuale utente

Ricoh

Ricoh LCIT RT5100 Guida rapida

GBC

GBC 16 Series Manuale utente

Canon

Canon INNER 2-WAY TRAY-E1 Manuale operativo e di manutenzione

Develop

Develop SD-509 Manuale utente

Kyocera

Kyocera KM-6230 Manuale

Triumph Adler

Triumph Adler DF-710 Manuale