Viewpro DDL14H-HUSPB Manuale utente
1
Video and Data Transmitter
DDL14H-HUSPB
User Manual
www.viewprotech.com
2
Contents
1. Package Contents................................................................................ 3
2. Product Description............................................................................. 5
2.1. Air Unit Interfaces.....................................................................5
2.2. Ground Unit Interfaces............................................................. 7
3. Installation........................................................................................... 9
3.1. Air Unit Installation...................................................................9
3.1.1. Antenna installation...................................................... 9
3.1.2. Power supply............................................................... 11
3.1.3. Connection to camera................................................. 11
3.1.4. Connection to flight controller (RC & telemetry)........ 12
3.2. Ground Unit Installation......................................................... 13
3.2.1. Antenna installation.................................................... 13
3.2.2. Power supply............................................................... 14
3.2.3. Connection to ground control station......................... 14
3.2.4. Connection to remote controller................................ 15
3.2.5. Setup video output...................................................... 16
3.2.6. Use ViuLinxTM System................................................... 17
4. Software.............................................................................................19
4.1. Installation.............................................................................. 19
4.2. Language Selection................................................................. 21
4.3. Device Info.............................................................................. 22
4.4. Status...................................................................................... 22
4.5. Configuration.......................................................................... 23
4.5.1. Mode configuration..................................................... 23
4.5.2. Baud rate configuration...............................................25
4.5.3. Remote control mode configuration...........................25
4.6. Frequency Scan.......................................................................25
4.7. Upgrade.................................................................................. 27
4.8. View Live Video.......................................................................27
4.8.1. On phone..................................................................... 27
4.8.2. On monitor.................................................................. 27
3
1. Package Contents
Air Unit & Ground
Unit
Air unit antenna ×2
（2.4G antenna for air unit）
（1.4G antenna for air unit）
Ground unit antenna× 2
Air Unit Cables
Power cable x1
This is used to connect the
output of a battery to the power
input of the air unit.
HDMI cable (Micro to Micro) ×1
This is used to connect the HDMI
output of camera to the HDMI
input of the air unit.
RC cable x1
4
This is used to connect the
PPM/S.bus port of flight
controller to the RC port of the
air unit.
Serial cable x1
This is used to connect the
telemetry port of flight controller
to the serial port of the air unit.
USB cable(Micro to Type-A)×1
This is used to connect the USB
port of a PC or a cell phone, to
the Micro USB port of the ground
unit.
Ground Unit Cables
Power cable x1
This is used to connect the
output of a battery to the power
input of the air unit.
HDMI cable (Mini to TYPE A) ×1
This is used to connect the HDMI
output of ground unit to the
HDMI input of the monitor.
RC cable x1
This is used to connect the
training port of a remote
controller to the RC port of the
ground unit.
Serial cable x1
This is used to connect the
telemetry port of ground station
to the serial port of the ground
unit.
USB cable (Micro to Type-A)×1
Connect the USB port of a PC or a
cell phone, to the Micro USB port
of the ground unit.
5
2. Product Description
2.1. Air Unit Interfaces
1Power Input Port
Connect a 7V ~ 16V power source to this port. The power source can be from the drone
when the air unit is used for drone operation, or can be from a power adaptor when the
air unit is upgraded on the ground.
2Serial Port（UART）
Connect this port to the telemetry port of a flight controller for telemetry
communication with the ground unit.
3Remote Control Port（RC）
Connect this port to the PPM/S.bus port of a flight controller for remote control
communication with the ground unit.
4Micro USB Port
Connect this port to the USB port of a PC or Laptop, and use the Taisync PC program to
upgrade firmware on the air unit.
1HDMI Port
Connect the HDMI output of a camera to the HDMI input of the air unit.
③
②
1
④
1
6
1Bind Button
Press this button to perform the binding operation.
2LED 1
When this LED is on, it means the air-to-ground link is connected; when this LED is off, it
means the air-to-ground link is disconnected.
3LED 2
When this LED is on, it means the ground -to-air link is connected; when this LED is off, it
means the ground -to-air link is disconnected.
1RF2 Port
Connect the 2nd air unit antenna to this port.
2RF1 Port
Connect the 2nd air unit antenna to this port.
1Fan Ventilation Outlet
Don’t block this fan ventilation outlet to ensure effective cooling.
1
2
1
1
②
③
7
2.2. Ground Unit Interfaces
1HDMI Port
Connect this mini HDMI output port to the HDMI input port of a display device using the
supplied Mini HDMI to HDMI cable.
2Micro USB Port
Connect this port to the USB port of a PC or Laptop, and use the Taisync PC program to
upgrade firmware and set parameters on the air unit.
3USB Port
Connect this port to the Lightning port of an iPhone, or to the USB port of an Android phone
and use ViULinxTM cell phone APP to watch live video play and set parameters of the air and
ground unit.
4Serial Port（UART）
Connect this port to the telemetry port of a remote controller, or the serial port of a ground
control station to setup a telemetry link between the drone and the remote controller or the
ground control station.
5Remote Control Port（RC）
Connect this port to the training PPM/S.bus port of a remote controller. Remote controller can
use ViUlinxTM uplink to communicate with the drone.
1
②
③
④
⑤
1
②
③
④
8
1Charging Port
Connect this port to the supplied power adaptor to charge the battery in the ground unit.
2Power Button
When the ground unit is off, push this button once to turn on the ground unit. When the
ground unit is on, push this button once to turn off the ground unit.
3Fan Ventilation Outlet
Don’t block this fan ventilation outlet to ensure effective cooling.
4Fan Ventilation Outlet
Don’t block this fan ventilation outlet to ensure effective cooling.
1RF2 Port
Connect the ground unit antenna to this port.
2RF1 Port
Connect the 2nd ground unit antenna to this port.
1Bind Button
Press this button to perform the binding operation.
1
②
1
9
1LED 1
When this LED is on, it means the air-to-ground link is connected; when this LED is off, it
means the air-to-ground link is disconnected.
2LED 2
When this LED is on, it means the ground -to-air link is connected; when this LED is off, it
means the ground -to-air link is disconnected.
3. Installation
3.1. Air Unit Installation
3.1.1. Antenna installation
2.4G air unit
1
②
10
Insert the air unit antennas into the RF ports. Antenna clicks in when properly installed.
1.4G air unit
Insert the air unit antennas into the RF ports with RF cables. RF cables clicks in when
properly installed.
Note:
(1) To avoid equipment damage, install antennas before powering on the units.
(2) When install air unit to drone, avoid the antennas being blocked by parts of the drone.
(3) Both antennas need to be installed.
(4) Ensure the antenna connector is vertical to the module when it is pushed into the RF
port.
(5) When uninstall the antenna, hold the connector and pull it out of the RF port. Do not
pull the cable.
Indice
Altri manuali Viewpro Trasmettitore
