Vinotemp 100WC Manuale utente
Wood Wine Cellar
Owner’s Manual
Model: For General Use
V
Vi
in
no
ot
te
em
mp
p
I
In
nt
te
er
rn
na
at
ti
io
on
na
al
l
C
Co
or
rp
p.
.
w
ww
ww
w.
.v
vi
in
no
ot
te
em
mp
p.
.c
co
om
m
1
TABLE OF CONTENTS
Welcome...............................................................................2
Important Safety Information…..........................................3
Features Description…………………………….……………4
Installation Instruction………………………………………..6
Cellar Inspection……………………………………………………..6
Cellar Location…………………………………………………….…6
Level Adjusting………………………………………………………6
Electrical Cord……………………………………………………….6
Winemate Installation……………………………………………….7
Cellar Assembly……………………………………………………..8
Use and Temperature Control………………………………9
Bottle Load……………………………………………………………9
Temperature Setting………………………………………………..10
Normal Sounds……………………………………………………...11
Maintenance…………………………………………………..12
Troubleshooting……………………………………………13
Customer Support……………………………………………14
Warranty……………………………………………………….15
2
Welcome
Nov. 2006
Dear Vinotemp Customers,
Thank you for purchasing our wood wine cellars. Our goal at Vinotemp is to
produce the finest quality wine cellars in the industry.
Each of us here at Vinotemp plays an important role in the development of your
wine cellar. Your unit has been made for you based on the information we have
received. We hope you enjoy your wine cellar for many years to come.
We thank you for your business. We hope that your experience with us is
pleasurable and that we help you enjoy one of the greatest pleasures in life,
collecting and drinking wine.
Sincerely yours,
India Hynes
President
Vinotemp International Corp.
17621 S. Susana Rd.
Rancho Dominguez
California 90221
U. S. A.
Thank you for choosing a Vinotemp wine cellar.
Please enter the complete model and serial numbers in the space provided:
Model_________________________________________________________
Serial No.______________________________________________________
Attach your purchase receipt to this owner’s manual.
3
Important Safety Information
•DO NOT PLUG IN THE CELLAR UNTIL 24 HOURS AFTER
DELIVERY.
•DO NOT USE A GROUND FAULT INTERRUPTER (GFI).
•A DEDICATED 15 AMPCIRCUIT IS HIGHLY RECOMMENDED.
•KEEP CHILDREN OUT OF ENTERING THE WINE CELLAR.
4
Feature Description
•Vinotemp wood wine cellar is designed and used to provide a stable
temperature between 52~62 °F at a normal environment.
•The wine cellar will keep a desired humidity of 50~70% RH even when the
environment becomes dry and humid.
•These temperatures and humilities are optimized for long term wine
storage.
•Top, rear and side exhaust options are available for convenient
installations.
•See the voltage type from the label on the back of the cooling unit.
5
The dimension and capacity are specified as follows:
Model Description Capacity (Bottles) Dim (W”XD”XH”)
VINO-100WC 1 Door 70 30X29X40
VINO-110FW 2 French Doors 70 36X29X36
VINO-114 1 Door 70 30X29X40
VINO-114G 1 Glass Door 70 30X29X40
VINO-200WC 1 Door 175 28X29X73
VINO-230 2 Doors 135 38X29X50
VINO-230G 2 Glass Doors 135 38X29X50
VINO-250 1 Door 175 28X29X73
VINO-250G 1 Glass Door 175 28X29X73
VINO-296 2 Doors 200 58X29X40
VINO-296G 2 Glass Doors 200 58X29X40
VINO-300WC 1 Door 240 32X29X82
VINO-400EC 1 Door 300 38X29X82
VINO-400EC3D 1 Door 450 38X40X82
VINO-400CRED 4 Doors 560 88X29X40
VINO-400CREDG 4 Glass Doors 560 88X29X40
VINO-440 1 Door 300 38X29X82
VINO-440TDFT 2 Furniture Trim Doors 300 38X29X82
VINO-440TDG 2 Glass Doors 300 38X29X82
VINO-440TDBON 2 Beveled Doors, Cornice 300 46X33X86
VINO-440TDGFE 2 Glass Doors, Front Vent 300 38X29X82
VINO-600EC 2 Doors 450 51X29X88
VINO-600EC3D 2 Doors 700 51X40X88
VINO-600-2 2 Doors, 2 Cooling Units 500 51X29X88
VINO-700FT 2 Furniture Trim Doors 455 51X29X88
VINO-700G 2 Glass Doors 455 51X29X88
VINO-700PRO 2 Furniture Trim Glass Doors 455 51X29X88
VINO-700BON 2 Beveled Doors, Cornice 455 59X33X92
6
Installation Instruction
1. Cellar Inspection
•Note any damage by yourself and the installation personals.
•Claim the damage with 5 days after receipt.
2. Cellar Location
•Place the wine cellar in a properly ventilated location. If it is not, heat
exhausted by the unit will build up and the unit will not operate properly.
•Leave 4~6 “clearance between the exhaust side and the wall or ceiling.
•Leave 2~4” clearance for the fresh air supply side.
•Leave 1~2” for the other sides.
3. Level Adjusting
•Adjust the level by raising and lowering the feet height using a wrench
•Ensure the cabinet stand solidly and the doors flush and seal well.
4. Electrical Cord
•We strongly recommend against the use of an extension cord. However, if
you still select to use an extension cord, it is absolutely necessary that it is
a UL LISTED 3-wire grounding type appliance extension cord. The
marked rating of the extension cord should be 115 V, 15 A. or equivalent
and not greater than 15ft in length.
7
5. Winemate Installation
•Unplug the wine cellar or disconnect power.
•Unplug the light from receptacle.
•Unscrew the 2 screws and remove the light.
•Unplug the Winemate cooling unit from receptacle.
•Use 7/16” wrench to unscrew the 2 screws and remove the 2 brackets
•Move the cooling unit away from the mounting side and place it on the top
of the rack temporally
•Remove the cooling unit to a stable place.
8
6. Cellar Disassembly
•Use 4 mm hex wrench, ¼” nut driver and Phillips head screw driver to
unscrew and remove all the screws and nuts from panels and feet.
9
Use & Temperature Control
1. Bottle Load
1. Wine Bottle 2. Rack
•Unless otherwise modified, the standard rack cubicle is 3 3/8”X3 3/8” to
accommodate the traditional cabernets standard 750 ml Burgundy or
Bordeaux bottles.
•Customize 3 ¾” for French Burgundy, 4” for Dom Perignon, 4 ½” for
Magnums.
•Load wine bottles starting from the bottom; locate the bottles evenly from
left to right. This will prevent the cellar from shifting and potentially
knocking the doors out of alignment.
•Keep the rack open by every few bottles to allow the free airflow.
•Load the cellar with 2 cases of bottles everyday to allow the cellar cool
down rapid.
2. Temperature Control
•Set the temperature at 55 °Ffor the optimum aging of wine
•Set the temperature higher at very high ambient temperature.
•On initial start-up, the time required to reach the desired temperature
will vary, depending on the quantity of bottles, temperature setting
and surrounding temperature.
•Allow at least 24 hours to stabilize the temperature for each new
temperature setting operation
Questo manuale è adatto per i seguenti modelli
54
Indice
Altri manuali Vinotemp Refrigeratore per vino
Vinotemp
Vinotemp 700 Manuale utente
Vinotemp
Vinotemp VT-36 Manuale utente
Vinotemp
Vinotemp VT-58 Manuale utente
Vinotemp
Vinotemp VT-38 Manuale utente
Vinotemp
Vinotemp VT-18TEDS Manuale utente
Vinotemp
Vinotemp Wine-Mate WM-1500CD Istruzioni per l’uso
Vinotemp
Vinotemp Wine-Mate WM-2500SSD Manuale utente
Vinotemp
Vinotemp VT-VC190BG Manuale utente
Vinotemp
Vinotemp VT-58 Manuale utente
Vinotemp
Vinotemp VT-12TSMD-2Z Manuale utente
Vinotemp
Vinotemp Wine-Mate WM-1520SSW Manuale utente
Vinotemp
Vinotemp VT-32TS-FE Manuale utente
Vinotemp
Vinotemp WINE-MATE WM-1500LOWP Istruzioni per l’uso
Vinotemp
Vinotemp VT-34-2ZONE Manuale utente
Vinotemp
Vinotemp VINCAVE 200 Manuale utente
Vinotemp
Vinotemp VT-165TSRV Manuale utente
Vinotemp
Vinotemp VT-CHILLER SLVR Manuale utente
Vinotemp
Vinotemp VT-12TEDS Manuale utente
Vinotemp
Vinotemp VT-28-TEDS Manuale utente
Vinotemp
Vinotemp VT24 Manuale utente
