Vip-Vision VDIRME Series Manuale utente
VDIRME/G Series
Camera Quick Install Guide
Version 200318
Thank you for purchasing a VDIRME/VDIRMG Series CCTV Surveillance Camera.
This Quick Install Guide covers basic setup, installation and use of your surveillance system.
For the full user manual, instructional videos, tips on using your surveillance system &
warranty information, please visit: www.vip-vision.com
2Crucial evidence. Always.
VDIRME Series | Surveillance Cameras
Electrical safety
• All installation and operation here should conform to your local electrical safety codes.
• Check that the power supply is correct before operating the camera.
• Ensure the power supply conforms to the requirement in the SELV (Safety Extra Low Voltage) and the
Limited power source is rated DC 12V or AC 24V in the IEC60950-1. (Power supply requirement is subject
to the device label).
• Do not install wiring while the camera is powered on.
• Prevent the power cable from being trampled or pressed, especially the plug, power socket and junction.
• We assume no liability or responsibility for any fires or electrical shock caused by improper handling or
installation.
• We assume no liability or responsibility for any problems caused by unauthorized modification or
attempted repair.
Environment
• Do not aim the camera at strong light (such as lighting, sunlight, etc) to focus; this may cause overexposure,
which will affect the longevity of the CCD and/or CMOS.
• Transport, use and store the camera within the specified range of humidity and temperature.
• Do not store the camera in a wet, dusty, extremely hot, or extremely cold location, or in an area with
strong electromagnetic radiation or unstable lighting.
• Do not allow water or other liquids to fall into the camera; this may damage internal components.
• Do not allow water or other liquids to make contact with indoor cameras (cameras with no IP rating); this
may damage the camera or cause fire/electrical shocks.
• Keep the camera well ventilated in case of heat accumulation.
• Pack the camera with the included factory packaging (or material of similar quality) while transporting
to prevent damage.
• While being transported, stored or installed, ensure the camera does not experience heavy stress, strong
vibration or liquid contact .
Warning
• Change the default password after login in order to avoid unauthorised access.
• Install the camera using the standard accessories provided by the manufacturer and make sure the
device is installed and fixed by professionals.
• Keep the camera away from laser beams while using a laser device.
• Do not connect two power sources to the device at the same time; this may result in damage to the
camera.
Statement
• Refer to the actual product for more details; the manual is just for reference.
• The manual will be regularly updated as the product updates; the updated content will be added to the
manual without prior announcement.
• Contact the supplier or customer service if there is any problem occurred camera using the camera.
• Contact the supplier or customer service for the latest procedure and supplementary documentation.
• Actual value of some data and the value provided in the manual may differ due to environmental
differences, etc.
• VIP Vision is not liable for any damages caused by operation which is not followed in the manual.
Safety Information
3
www.vip-vision.com
VDIRME Series | Surveillance Cameras
FCC information
Operation and Daily Maintenance
• Do not touch the heat dissipation component of the camera directly in order to avoid burns.
• Do not dismantle the device; there is no component which can be fixed directly by users in the camera.
Contact the supplier to replace desiccant if it becomes green.
• Grounding the camera is recommended to enhance the reliability of it.
• Do not touch the CCD (CMOS) optic component directly. Use an air duster to clean dust or dirt on the lens
surface, or use a cloth lightly wet with alcohol to wipe away dust gently.
• Use a dry soft cloth to clean the camera. If there’s a large amount of dust, use a mild detergent diluted
with water first. Don’t use volatile solvents such as alcohol, benzene, thinner or strong detergents, as this
may damage the surface coating or damage the camera.
• To clean the lens, use a dry soft cloth to wipe water or oil gently until dry, then use an oil-free cotton cloth
or paper soaked with alcohol/detergent to wipe from the centre of the lens outwards.
FCC conditions
• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired
operation.
FCC compliance
• This equipment has been tested and found to comply with the limits for a digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communication. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced technician for help.
Note: Refer to the disk for more details, check and download corresponding user’s manual and tool.
Before installation, open the package and check that all components are included. If any components are
broken, contact your local supplier.
4Crucial evidence. Always.
VDIRME Series | Surveillance Cameras
1 x VDIRME/VDIRMG Series IP Camera
1 x Quick Start Guide
1 x
Installation Accessories Bag:
• Position installation map
• Expansion bolts
• Installation screws
• Screwdriver
1 x CD
Device framework
Component Name
1 Dome Enclosure
2 Dome Pedestal
3 12VDC Power input
4 LAN Network port (Ethernet connector)
Dimensions
Included components
1. Pre-install Information
5
www.vip-vision.com
VDIRME Series | Surveillance Cameras
Here we will walk you through the installation process of your “VDIRME Series” camera. We will
show you how to set up and adjust your camera, insert your microSD card, waterproof your net-
work cable and setup your alarm. Be sure to check the Pre-install Information to have an under-
standing of the included components, dimensions, and connection ports.
2. Camera Installation
2.1 Position the camera
1. Position the installation map to a wall or ceiling and drill holes where marked.
2. Insert the expansion bolts into the drilled holes.
3. Loosen the locking screws, then pull the enclosure downwards to separate.
4. Install the microSD card. (Optional, see 1.2 Accessing the microSD card slot).
5. Run the wire through the bottom or side exit and insert the multi-function cable into the exit
hole on the installation surface (See 1.3 Cable Management).
6. Adjust the pedestal position, aiming it at the bottom hole. Take out 3 self-tapping screws and
insert them into the expansion bolt holes on the bottom, fixing the pedestal to the surface.
7. Install the enclosure back to the pedestal by pushing upward and locking the screws firmly.
8. Plug in the external cables according to usage requirements.
9. Apply waterproofing to network cable (See 1.4 Waterproofing the camera).
10. Setup is complete!
6Crucial evidence. Always.
VDIRME Series | Surveillance Cameras
1.2 Accessing the microSD card slot (optional)
1. Loosen the 4 screws on the dome pedestal, then take down the compression cover and take
out the dome body.
2. Loosen the 3 screws on the dome body and then open it.
3. Locate the microSD card slot and install it into its dedicated slot, making sure it’s properly
secured.
4. Assure you install the device seal ring back to the dome body after installing the microSD card.
5. Tighten the 3 screws on the dome body and put it back into the enclosure.
6. Tighten the 4 screws on the pedestal and install the compression cover.
1.2.1 Installing the microSD card
7
www.vip-vision.com
VDIRME Series | Surveillance Cameras
1.3 Cable management
Lead the cable out through your ceiling or wall. This can protect and hide the cable effectively.
1.2.1 Bottom wiring
1.2.2 Side wiring
Lead the cable out through the side exit and add a metal conduit to prevent the cable from being
damage.
1.2.2 Advantages of the microSD
Note: Having a standalone microSD card will not ensure that you have the same quality playback, nor
the capacity compared to a separate NVR or storage device.
The microSD card is useful for anyone who wishes to have another way to back up storage, or is on a
budget and doesn’t have a recorder. The microSD card is placed inside of the camera, and can hold
a set amount of storage (dependent on size of card) for any intended use, such as: video playback,
storage, backup etc.
The microSD card utilises “Edge Recording”. This is when the camera records video directly onto the
installed card in the camera, instead of a separate NVR or storage device. This gives the user more
flexibility in recording video.
8Crucial evidence. Always.
VDIRME Series | Surveillance Cameras
1.3 Waterproofing the camera
1. Install the rubber ring into the network port, keeping the smaller hole of the rubber ring facing
outwards and fixing the rubber ring onto the main body of the waterproof cable.
2. Pull the network cable (without the crystal head) through the main body of the waterproof
connector. Fix the rubber ring and waterproof locking cover, attach the crystal head of network
cable, and insert it into the network cable.
3. Put the main body of the waterproof connector on the network port and rotate it clockwise to
lock the network port and waterproof connector firmly.
4. Put the waterproof cover on the main body of the waterproof connector and rotate it clockwise
to lock them firmly together.
www.vip-vision.com
Note:
This quick install guide is for reference only. Slight difference may be found in user interface.
All the designs and software here are subject to change without prior written notice.
If there is any uncertainty or controversy, please refer to the final explanation of us.
Please visit our website or contact your local service engineer for more information.
For the full user manual, instructional videos, tips for using your surveillance system and
warranty information, please visit:
Altri manuali per VDIRME Series
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Vip-Vision Telecamera di sicurezza
Vip-Vision
Vip-Vision Solar Series Manuale utente
Vip-Vision
Vip-Vision SLR-B Series Manuale utente
Vip-Vision
Vip-Vision Panoramic Series Manuale utente
Vip-Vision
Vip-Vision VDIRME Series Manuale utente
Vip-Vision
Vip-Vision PTZIRW Series Manuale utente
Vip-Vision
Vip-Vision VDIRM Series Manuale utente
Vip-Vision
Vip-Vision SLR-B Series Manuale utente
Vip-Vision
Vip-Vision SLR-B Series Manuale utente
Vip-Vision
Vip-Vision VSIP2MPVDIRFV2 Manuale utente
Vip-Vision
Vip-Vision VSIP12MPFEIRV2 Manuale utente
