Vision Tech Shop TPD Series Manuale utente

TPD

Interface Scale

V1.1

TPD Series Interface Scale Operation Manual

CONTENTS

1. INTRODUCTION----------------------------------------------------------------------------- - 1 -

2. INSTALLATION------------------------------------------------------------------------------- - 1 -

2.1 Installation------------------------------------------------------------------------------ - 1 -

2.2 Leveling--------------------------------------------------------------------------------- - 1 -

2.3 Power Connection--------------------------------------------------------------------- 1 -

2.4 Rechargeable battery operation-------------------------------------------------- - 1 -

2.4.1 Charging the battery---------------------------------------------------------- 2 -

2.4.2 Battery maintenance-------------------------------------------------------- - 2 -

3. KEYS DESCRIPTION------------------------------------------------------------------------ 2 -

4. DISPLAY SYMBOLS------------------------------------------------------------------------ - 2 -

5. OPERATION------------------------------------------------------------------------------------ 3 -

5.1 Switching on/off----------------------------------------------------------------------- - 3 -

5.2 Zeroing---------------------------------------------------------------------------------- - 3 -

5.3 Using Tare------------------------------------------------------------------------------- 3 -

5.4 Select Weighing Units--------------------------------------------------------------- - 3 -

5.5 Back light Setting--------------------------------------------------------------------- - 4 -

5.6 Power auto off------------------------------------------------------------------------- - 4 -

5.7 Bluetooth Operation (Optional)--------------------------------------------------- - 5 -

5.7.1 Bluetooth Testing Tool Installation-------------------------------------- - 5 -

5.7.2 CON1 Communication Protocol Testing------------------------------- - 5 -

5.7.3 CON2 Communication Protocol Testing------------------------------- - 7 -

5.7.4 ASK Command Testing---------------------------------------------------- - 9 -

5.8 POS/ECR protocol selection----------------------------------------------------- - 11 -

6 PARAMETER SETTING-------------------------------------------------------------------- 12 -

6.1 MENU BLOCK----------------------------------------------------------------------- - 13 -

7. DIAGRAM: Serial interface---------------------------------------------------------------- 14 -

8. SPECIFICATION----------------------------------------------------------------------------- 15 -

9. DIMMENSIONS(inch/mm)----------------------------------------------------------------- 16 -

10.ERROR MESSAGE----------------------------------------------------------------------- - 17 -

TPD Series Interface Scale Operation Manual

- 1 -

1. INTRODUCTION

The TPD series interface scale that amplifies signals from a load cell, converts it to

digital data and displays it as a mass value

It is suitable for general weighing applications

15 mm LCD with white LED back light display

Standard RS232 port can be connected to computer, ECR or POS

Capacity 6 kg to 30 kg (12 lb to 60 lb)

2. INSTALLATION

2.1 Installation

Remove transport lock from bottom of the scale

base

Place the scale on a level surface

Install the stainless steel pan on top of the

plastic pan

Insert the pole (1) to pole bracket (3)

Fixing the pole(1) with screw (2)

2.2 Leveling

The scale is equipped with a level indicator located back side of device.

Use the adjustable leveling feet located on the bottom of the scale until the bubble

appears in the center of the indicator.

2.3 Power Connection

Connect the adaptor pin into the indicator adaptor jack.

Adaptor jack is locating below the left side of the scale.

Adaptor connects into your AC power socket. Plugable equipment must be installed

near an easily accessible socket outlet with a protective ground/ earth contact.

2.4 Rechargeable battery operation

Note: Please charge the battery before using the scale for the first time.

The symbol BATT on the weight display indicates that the battery is getting low.

it’s time to charge the battery with the AC power. If scale goes on being used without

proper charging, <BAT-LO> words will flicker on the display.

Approximately 1 hours of instrument usage are left; afterwards it will shut off

automatically.

Level bubble

TPD Series Interface Scale Operation Manual

- 2 -

Please use the supplied battery charger for charging the battery immediately,or scale

cannot be used.

2.4.1 Charging the battery

Before the first use, the battery should be charged by connecting it to the mains

power supply for at least 10 hours.

When the scale is plugged into the mains power the internal battery will be recharged.

Verify that the AC power socket outlet is properly protected.

Right side of the weight display there is an charging LED to indicate the status of

battery charging

Charge status of rechargeable battery is indicated by the LED display.

Red: Charging storage battery

Green: Rechargeable battery is completely charged

2.4.2 Battery maintenance

Do not use any other type of power adaptor than the one supplied with the scale.

Recharge battery should be charged in every three months when not in use.

If the scale is not used for an extended period of time,remove the battery from the

battery compartment to avoid leakage.

Store the battery in a sealed bag or box in a dry, temperate environment.

3. KEYS DESCRIPTION

4. DISPLAY SYMBOLS

CHARG

Charging indicator,indicates scale has been connected with power

STABLE

Stable indicator. Indicates the scale weight is stable.

NET

Net indicator. Indicates scale is displaying the net weight.

ZERO

Zero indicator.Indicates the scale is at zero.

Indicates the unit of measure in use (kilogram).

Indicates the unit of measure in use (pounds).

Indicates the unit of measure in use (ounces).

Bluetooth indicator,Indicates the scale is in Bluetooth mode

BATT

Battery low indicator,Indicates the battery need to be charged

Keys

Description

1)On/Off key,Used to switch on/off the scale.

2)Zero key,Used to clear and zero the display.

3) Enter key, Used to confirm selection in parameters option.

4)Left arrow key. Used to shift the location and move the digit to the left.

1)Tare key,Used to perform a tare function, Subtracts weights.

2)Value increment key. Used to change the selected digit value.

3)Set up key,Used to enter setup menu setting.

4)To change the menu option in menu setting.

1)Units key,Used to change weighing units(kg/lb/oz).

TPD Series Interface Scale Operation Manual

- 3 -

5. OPERATION

5.1 Switching on/off

Switch on the scale by pressing key,Display will be show the scale version

and then come to normal weighing mode.

To switched off the scale, press key again.

5.2 Zeroing

Environmental conditions can lead to the balance exactly zero in spite of the platform not

taking any strain. However, you can set the display of your balance to zero any time by

pressing key and therefore ensure that the weighing starts at zero.

5.3 Using Tare

To enable Tare function, it’s required to enter parameters to select f4 tare >ON,

Before access to the parameter,it need to press the calibration switch that is locating

below the scale.

The weight of any container can be tared by pressing button so that with

subsequent weighing the net weight of the object being weighed is always displayed.

Taring a container

Load weight on the platform.

Press key. Zero is displayed, and tare is subtracted. The [] indicator above

Net indicator appears.

Remove weight on the platform. Tared weight is displayed. It can set only one tare

value. It will be shown with a minus value.

Clearing tare

To clear the tare value, remove the load from the platform

Press key. Zero is displayed, The [] indicator above Net indicator

disappears ,tare weight is cleared.

5.4 Select Weighing Units

By pressing key in turn in normal weighing mode,it can convert the weighing units

(kg/lb/oz),the relative symbol will turn on in the display.

TPD Series Interface Scale Operation Manual

- 4 -

5.5 Back light Setting

It allows choosing the back light operation.

1 Press key during that start up ,display will be show “F0 BL”

2 Press key to enter.

3 Press key to change the settings back light display mode

to Auto/Off/On.

4 Press key to confirm.

Display

Description

AUTO

Backlight will be turned on, when start to use or

when weight is not in zero.

oFf

Backlight function will be turned off

Backlight will be always turned on

Note:If battery is getting low, the backlight function will not available

5.6 Power auto off

1 Press key during that start up ,display will be show “F0 BL”.

2 Press key to select the menu until display show “F1 OFF”.

3 Press key to confirm.

4 Press key to select the options.

F1 OFF

off

To set auto off function turn off, for scale always on

Set to turn off 3 minutes later

Set to turn off 10 minutes later

Set to turn off 30 minutes later

TPD Series Interface Scale Operation Manual

- 5 -

5.7 Bluetooth Operation (Optional)

5.7.1 Bluetooth Testing Tool Installation

Note: The following steps used for testing communication (only BLE Utility available for

testing )

▪ Turn on the BLE Utility software in your phone, it can be download from

AppGallery

▪ Scale should be in the allowed limits of the distance to connect Bluetooth.

5.7.2 CON1 Communication Protocol Testing

1 Turn on the scale.

2 Press key during that start up ,display will be show “F0 BL”.

3 Press key until display show “F2 COM”.

4 Press key to confirm,display will be show “BT”

5 Press key to enter,display will be show “CON1”

6 Press key to confirm,display show “F2 COM”.

7 Press key to select “BACK” option.

8 Press key to confirm and back to normal weighing mode.

Testing steps in the mobile phone

1 Tab the connect button in your mobile phone to connect the Bluetooth module

2 Select the Unknown Service the last but one

3 Tab it and turn on the icon,Once set it successfully ,The [] indicator above[ ]

Bluetooth indicator in the scale appears.

4 Tab logs ,the weighing data will be show

TPD Series Interface Scale Operation Manual

- 6 -

①

②

③

④

TPD Series Interface Scale Operation Manual

- 7 -

5.7.3 CON2 Communication Protocol Testing

1 Turn on the scale.

2 Press key during that start up ,display will be show “F0 BL”

3 Press key until display show “F2 COM”

4 Press key to confirm,display will be show “BT”

5 Press key to enter,display will be show “CON1”

6 Press key to select “CON 2 ”

7 Press key to confirm,display show “STA ”

8 Press key to confirm

9 Press key to select “BACK” option

10 Press key to confirm and back to normal weighing mode.

Testing steps in the mobile phone

1 Tab the connect button in your phone to connect the Bluetooth module.

2 Select the Unknown Service the last but one .

3 Tab it and turn on the icon,Once set it successfully ,The [] indicator above[ ]

Bluetooth indicator in the scale appears .

4 Tab logs ,the weighing data will be show.

TPD Series Interface Scale Operation Manual

- 8 -

①

②

③

④

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Vision Tech Shop Scala

Vision Tech Shop

Vision Tech Shop TVP Series Manuale utente

Vision Tech Shop

Vision Tech Shop VK-2D Manuale utente

Vision Tech Shop

Vision Tech Shop DLP-300 Manuale

Vision Tech Shop

Vision Tech Shop VK-4C Manuale utente

Vision Tech Shop

Vision Tech Shop VK-10S Manuale utente

Vision Tech Shop

Vision Tech Shop TVC Series Manuale utente

Vision Tech Shop

Vision Tech Shop TVD Series Manuale utente

Vision Tech Shop

Vision Tech Shop DSW-100 Manuale utente

Vision Tech Shop

Vision Tech Shop TVC Series Manuale utente

Vision Tech Shop

Vision Tech Shop TVD Series Manuale utente

Manuali Scala popolari di altre marche

AWS

AWS ZEO-50 Manuale utente

Gima

Gima Glass Body Fat Analyzer Manuale elenco delle parti

Seca

Seca 374 Manuale utente

TEC

TEC TEC SL59 SERIES Manuale utente

Axis

Axis B/E Series Manuale utente

Alecto

Alecto ACW-40 Manuale utente

Rice Lake

Rice Lake MSI-4260 IS Manuale utente

IKA

IKA RCT basic safety control Manuale utente

ADE

ADE M20011 Manuale utente

Duronic

Duronic KS3000 Manuale utente

Digi

Digi SM-720 Manuale utente

Cardinal

Cardinal CS Series Manuale utente

Korona

Korona Kastella Manuale utente

A&D

A&D FC-50Ki Manuale utente

BDA

BDA CAMARGUE Manuale utente

Tanita

Tanita HD-357 Manuale utente

Leifheit

Leifheit 03173 Manuale utente

Lumme

Lumme LU-1340 Manuale utente