DragonFly with Remote Control Quick Guide
Figure 4-1; Remote Control Tab Sections
4.1. Manage Transmitters
This section allows you to add up to 5 transmitters –and manage them individually or in
groups. The section allows you to add transmitters be name (above shows by serial
number) and to choose the channel. Each transmitter must be configured for its each
individual channel using the Wi-Fi local interface. The Dragonfly’s channel cannot be
programmed from the VRC application. The Manage Transmitter section includes:
1. Name –Name given to the individual transmitter.
2. Port –The port connection on the device.
3. Channel –Transmitter telemetry channel.
4. Control –allows to ping and retrieve transmitters status and set up to remote control
this transmitter chosen.
5. Remove –to delete transmitter.
6. Select –checking this box assigns these transmitters to the ‘Affect Selected
Transmitters’function for multi-transmitter control.
7. ‘?’–User information
8. ‘Add Transmitter’- Press this button enables the addition of a new transmitter.
9. ‘Affect Selected Device’enables the management of several chose transmitters.
4.2. Manage Selected Transmitters
This section contains the remote control commands for the dragon fly. It features two
main tabs:
1. RF Tab –Frequency and Power
2. Advanced Tab –all other parameters.
The following parameters may be controlled:
