VistaQuest VQ200 Manuale utente
VQ200
User’s Manual
1
1. Camera and Buttons
2
2. Using your digital camera
IMPORTANT NOTE:
Non-rechargeable batteries are not to be recharged
Different types of batteries or new and used batteries are not to be mixd
Batteries are to be inserted with correct polarity according to the
direction shown on the compartment and cover.
Exhausted batteries are to be removed from the camera
The supply terminals are not be short-circuited
Do not disassemble the battery
This digital camera is not intended for children under 3 years old.
Please keep this packaging since it contains important information.
2.1 Changing function modes
Press the POWER/MENU button, the camera goes into menu interface, you can
press the UP button to select and then by pressing the SHUTTER button to enter
next menu, the screen will display the following symbols, and the interpretations are
as follows:
3
Icon Mode
Take Photo
Self-Timer
AV I
Continuous
Capture
Camera
4
Icon Mode
VGA,640*480
QVGA,320*240
Icon Mode
Non-Compression
Mode
Compression
Mode
Modifying
resolution
compression
rate
5
Icon Mode
50Hz
60Hz
Anti
Flicker
Deleting all
6
Battery Capability
Icon Mean
>70%
>35%
>5%
<=5%
7
2.2 Inserting batteries
Open the camera’s battery compartment cover and insert 2 new AAA alkaline
batteries according to its polarity shown, then close it and press the Power/Menu
button to power on the camera.
After powered on, if you want to make changes to the camera’s default settings,
please read the instructions of this manual.
Note: Removing the batteries will result in loss of saved photos to the camera
memory , so do download photos before the batteries are removed and/or
batteries lose power.
2.3 Taking photos
After powered on, the camera is ready to take photos, just press the Shutter button,
a distinct beep can be heard and a photo is taken. Automatically the number
displayed on the screen will count by one.
Two quick beeps indicate:
1. there is not enough light to take a picture.
2. The memory is full,
Do not move the camera until you hear the beep. Moving the camera while
taking the picture will cause the photo to blur.
8
If the brightness is too low, 2 quick beeps are heard indicating that the photo
cannot be taken.
2.4 Playback and deleting the current photo
After taking a photo, you can press the PLAY BACK button to review the saved
photo, and you can press the POWER/MENU and UP button to enter deleting the
current photo mode.
2.5 Sleep mode (automatic power-saving mode)
The camera goes into sleep mode automatically after about 30 seconds of inactivity
By pressing the Power/Menu button for 3 seconds, two beep will be heard at
the same time and the camera goes into a sleep mode manually.
In sleep mode, energy consumption is very low and the battery life is prolonged.
Your camera can remain in sleep mode to save power. To use your camera again
just simply press the Power/Menu button.
2.6 Timer / AVI / Continuous Capture mode
Press the Power/Menu button once, the first icon<camera> is selected, Press
the shutter button and the camera mode changes in turn <Take
photos-->Timer-->AVI-->Continuous Capture > ,Press the Power/Menu again to
9
enter your desired mode.
Self-Timer AVI Continuous Capture
Note:
-- In AVI mode, be sure to have enough available light to effectively capture a
video image.
2.7 Modifying resolution
Press the POWER/MENU button and UP button, until the icon < Modifying
resolution > is selected, and then press the shutter button to change, then press
the Power/Menu again to enter your desired mode.
PS: The camera changes to high resolution mode and can take clear photos.
When you need to take a lot of photos at one time you can choose the low
resolution mode.
Indice
Altri manuali VistaQuest Macchina fotografica digitale
VistaQuest
VistaQuest VQ7020 Manuale utente
VistaQuest
VistaQuest VQ5115 Manuale utente
VistaQuest
VistaQuest VQ 350 Manuale utente
VistaQuest
VistaQuest VQ6100 Manuale utente
VistaQuest
VistaQuest VQ-5015 Manuale utente
VistaQuest
VistaQuest VQ1224 Manuale utente
VistaQuest
VistaQuest VQ-7024 Manuale utente
VistaQuest
VistaQuest VQ3010 Manuale utente
VistaQuest
VistaQuest VQ5115 Manuale utente
VistaQuest
VistaQuest VQ1000 Manuale utente
VistaQuest
VistaQuest VQ1030Ts Manuale utente
VistaQuest
VistaQuest VQ 5010 Manuale utente
VistaQuest
VistaQuest VQ-3007 Manuale utente
VistaQuest
VistaQuest VQ815S Manuale utente
VistaQuest
VistaQuest VQ-2005 Manuale utente
VistaQuest
VistaQuest VQ-2005 Manuale utente
VistaQuest
VistaQuest VQ-3015B Manuale utente
VistaQuest
VistaQuest VQ-3110 Manuale utente
VistaQuest
VistaQuest VQ8224 Manuale utente
VistaQuest
VistaQuest VQ-8920 Manuale utente
